开云体育

Just the GUI, no video preview. Is there a screenshot or something online for this GUI for videowalls?

Hi, do you need any video on the GUI or is the GUI just to switch the different videowall features? If the latter is the case, SIMPL Home from Ultamation is your friend. Since you have the SIMP

Hello, Is there a driver out there that lets you manage/switch different video sources on a videowall in Crestron Home? I just need CH to handle all of the UI stuff, the control is going to be

No, the Weather App couldn't be causing any problems, could it???...:)

In SMW/Config view, go to the VIEW drop-Down and select 'Display Control System Graphic' or use Alt-G to Toggle

Hi all, I am having an issue with SMPL (probably a silly one) where as when I load any program and go to the configuration window I don't see the processor or the devices on the top portion of the

Hello everyone, Has anyone here created a module for integrating the Televic D-Cerno system with Crestron? I'm trying to get feedback from the microphones (active/inactive state) in my project. I need

Seeing the same on my 760 and on client's DGE-100's. ?Sonos is not a part of either system but the Weather App is. ?Thinking that's the issue.

yea mc4 was working otherwise for ir just not the internal rf gateway. could use the ipad to control the room but the hr-310 had nothing and then all my hz-kpex were dead. they sent something today

I don't know where others are getting their info from, but it is wrong. CH can only be connected to a single lighting processor at a time and maybe this is what is confusing them. Lutron on the other

Hi, went to system maintenance , on re-docking the unit after the proper battery drain (undocking).Recently a unit has been undocked just to drain the battery and after few days , I returned back to

If anyone is interested I have uploaded a simpl+ macro tha can help with DALI Dt8 rgb_DT8v1.1.usp ( /g/crestron/files/rgb_DT8v1.1.usp ) Thank you all

Are you sure the mc4 was online? It does require setcsauth with a user off the cp4

Yea I had it all setup and spent 2 hours with TB on the phone. never got it working just now finishing redoing the program to run on the mc4 instead of the cp4.

They must be mistaken it for a 2 series or something? It shows in the program when you add it

Looking for some help. Was replacing an mc3 with mc4 as a slave for some lighting. I'm being told by TB that the gateway built into the mc4 isn't available when in slave mode. can anyone confirm this?

Maybe try clearing your cache or trying a different browser.

Pretty sure you could use a SIMPL processor for the Lutron communication, running Ultamation's SIMPL Home to connect to each of the Home systems. Set up which lighting goes to which Home system in the

Ah brilliant! Why didn’t I think of that of that…

I don't know about the CH side of thins and if that may break things but this is pretty tropical with Lutron in commercial environments -- e.g. each room/building area controls only its area within