开云体育

How is it a disaster?

I'm glad to hear it is working for you.

Hello, I want to thank everyone for their comments & assistance. I reached out to an AI website & with a lot of errors on its part and lots of reexplaining exactly what I wanted the code to, I have a

Are you loading to the same type of processor as defined in SIMPL? BACnet slots change between processor models so a program with an RMC4 defined won't run BACnet on a CP4.

Crestron App is what to use for Crestron GO in VTP In SIMPL define it at Crestron GO They never updated the nomenclature in VTP

What would cause the error "bacnet stack not runnig" on a 4 series? It has a license activated I am just trying to HOST a handful of points.

Hi All, Excuse the dumb question, but.... The last time I programmed an iPhone interface was back in 2019. I have one to do on a project and just opened the program to add it in, and I am not sure

The whole Construct WYSIWYG concept is a complete disaster.? You aren't alone.

Greetings All, Did anyone managed to configure UPS APC? with Crestron 4 Series Using SNMP to monitor the device.? Appreciate your helps. Thanks

I am wondering whether the CH5 template project is being used? a lot and works correctly.? I have been banging my head against the wall trying to get something to work correctly(On multiple

I had to make one for conference room on a military base that changed from "Classified", "Unclassified" or "Room Open" outside based on what was happening. I did different colors for each message to

Thanks for posting this.

Tony, You might want to suggest using this module just for the arming/ disarming portion. Connects right to the keypad buss on the alarm panel and is rock solid. We use it on all our projects. Control

I'll try those out if I can't get it working. Thanks! -- Stephen H Programmer / Installation Technician

I found one about 5 months ago, in URC database learned into a C4 system from URC remote.

BTW...I obtained another programmers SIMPL code that contained an EVO IR file. It did not work on the Tivo model we had but it might work on the model you have? I just posted it...

The data sheet for the Evo Pro does specify a bluetooth only remote... EVOPRO_DS_031924.pdf ( https://evolutiondigital.com/wp-content/uploads/2024/05/EVOPRO_DS_031924.pdf ) whereas their model that

What's weird is I have another evo pro in place of where the 2nd ZeeVee cable box used to be, and currently I am throwing the old ZeeVee IR commands to it and they are doing things to control the Evo

Thank you very much for the information good sir, that would explain why I can't find a driver for them. -- Stephen H Programmer / Installation Technician

Hey Stephen, the new Evo Pro boxes don’t have IR sensors on them from what I can tell. The remotes that come with them are RF but it’s basically a Google/ Android TV running a cable app.