开云体育

If a remote comes with the device and assuming it's IR (some remotes now use RF) you can do it that way. If the API or codes do not support it you might be out of luck. [email protected]> wrote:

You would need the Dante Director subscription for that site/domain and the Dante subnet would need access to the internet FWIW - a “virtual matrix” does work, Audinate had it running at ISE and

If you use a DSP, Tesira, Q-Sys, etc, you could control that. Have Dante inputs go into a matrix mixer then out ot Dante outputs. You can also process signals, EQ, etc. I suggest Q-Sys Core Nano

Hi, ? with the Dante Controller software, I can manually change the routing of the Dante/AES67 devices on my network. What i?m looking for is something like a “virtual” Dante/AES67 matrix, that

I am currently controlling a Fire TV stick using a FLIRC adapter within Crestron Home. Customer has requested direct Netflix and Prime buttons on his Crestron remote. Does anyone know of a way I can

Home Assistant is an open source smart home platform that supports integration with a wide range of smart home devices.? Through the work of two Crestron programmers, a Crestron system can be

OK. After re-Compiling the original, re-saving and compiling, and after many tries, the modules are there, but the latest issue was getting an X-panel to connect. Finally got that, but changing the

Thanks for responding Chris. 1. It's a CP4N. (sorry) 2. That far back, huh? I guess that's why there's some leftovers in the warehouse to use. Understood. 3. I do see Slot7, but didn't notice the

Jim, Answer is "it depends" 1. There is no CP4E.? Are you talking about a CP2E, CP4N, or CP4? 2. MPC-M5 is a 2 series processor 3. The MPC-M5 does support ethernet control devices. In SIMPL you

I think I already know the answer to this one, but: Can I easily test my program for a CP4E in a MPC-M5? (it's the only thing I have handy, as the real one is already in use onsite and I want to test

Another quick way to navigate around within Simpl signal lists or on the left program view is to hold CTRL while scrolling- it scrolls at a larger interval than regular. But yea when you are in

Just did one a couple days ago and can confirm the commands for power are POWR___0\x0D and POWR___1\x0D.? The ___ are 3 spaces.? The displays did not acknowledge the power off command or acknowledge

Dave, this isn't related to favorites, but can you ask what the status is of the Certified Driver wrapper for Pool/spas? I was "being worked on" in Jan of 2023 and hasn't come out. I had a case but

+1 for the new firmware. Had much better luck running AES67 from NVX to QSYs.

I hate being in my late 100's and just finding out about some of these!!!...:) Thanks, guys!!

Correct. This is found under Community's new Known Issues section as KI #0029. Mitigation is to roll back to SG 2.17 before recompiling the .vtz/.c3p while this is being investigated. You can click

It seems the culprit here is the version of Smart Graphics. Role back your smart graphics in VT pro and recompile. 1. Close VT Pro 2. Uninstall Smart Graphics from Control Panel 3. Download and

If you hold shift and click on scroll area the scroll bar will move directly there. There is also alt-D, alt-a, alt-s, and ctrl-g.

rebuilt the project, make sure you have internet connection and all firewall off on your laptop.

I didn't think of that work-around. I've been caught between mouse third-button scrolling (lots of scrolling) and moving/grabbing the slider button on the right, both of which get to be a pain. I just