开云体育

Thanks for your answer, Even if I don't know from where the 1000 to 1010 come from, I give it a try but always received ~ERROR,2\x0D\x0A. Thanks anyway and congratulation for your first post :-).

I think the MyCrestron is only for Crestron Home and Use the v1.1 Module.

Any experiences with these?? TIA!

Weirdly, this is the second request I e seen for the old SG SDK (unless that was you as well?!) Crestron is the only place this should come from. ?If they won’t give it to you (they will have a

How are you? I am a programmer from Japan. This is my first post. I have controlled Lutron Quantom in the past. I used QSE-CI-NWK-E. I partially controlled with phantom keypad. #device,1000,1,3\n

Search for CRESTRON HOME – GOOGLE NEST THERMOSTAT, the driver is free of charge, send Chris your processor's MAC address to get the full license.

Thanks for your answer, This does work for a physical keypad, but does not for a phantom keypad and unfortunately, I also have to address some phantom one. Thanks anyway, you solve half of my issues.

how much is the driver? Thanks

If the integration ID is 90, and you want to send a press for button 1, the command should be: #DEVICE,90,1,3\x0D\x0A

This was only available on Crestronlabs. If someone still has a copy, this would be a great help Thanks

np

What?? I'm shocked!...

Thank you, Josh! I will give that a go. I appreciate the details on how to do this. Eric

Turns out my NAX didn't output any data from the "Direct Connect Info Feedback". However, after performing an open port scan of the DM-NAX-8ZSA I found that TCP ports 50010-50017 appear to be Smart

Thanks Arnaud nf Sent: martes, 1 de octubre de 2024 08:53 a. m. To: [email protected] Subject: Re: [crestron] intersystem controls - nest module Hi Nico, Please email Chris (dot com) with your

Thanks for your answer, Yes, there is several keypads in the room, but the problem is the same with them, I receive "Error, 2". Thanks anyway.

I have also had issues in the past with controlling phantom keypads. Not sure of it was the lighting integrator that did not configure them correctly or if it's just a function of the lutron system. I

Hello Group, We were usually installing Lutron Grafic Eye with a Lutron QSE-CI-NWK-E RS-232 to interface with our Crestron processor and we were using the "DEVICE" command to mimic presses and

Awesome – exactly what i was looking for (and even more)! Thanks, Thorsten Von: [email protected] <[email protected]> Im Auftrag von Andrew Linck Gesendet: Mittwoch, 2. Oktober 2024 13:59 An:

Crestron's developer landing page has a separate section for NVX and NAX, is this what you are looking for? https://www.crestron.com/developer