开云体育

Also, Regarding the TSR SubSlots (TSR-310 Buttons and TSR-310 AppleTV Control Reserved Joins), My understanding is that the outputs are interlocked based on whether the ATV Control 'ENABLE' input is

Ok, but... I'm talking about in the context of stefuel2's problem. They have a single AP, and likely aren't running it from a managed switch of any flavour anyway.

Hi Rick, I agree they work with non-UniFi switches. When multiple AP's broadcast the same SSID at the same site, do devices roam across them well, or does roaming break things -- is the question I'm

Hi Vincent, Contact me in PV Regards, Sébastien LENOIR [email protected]> a écrit :

That’s an interesting theory, but I doubt it corresponds to much with what’s actually going on. UniFi APs work with non-UniFi switches.

On this UniFi issue, are UniFi AP's being used with a non-UniFi switch? I once had pervasive reproducible issues like this on Apple products simply disappear overnight by switching the UniFi AP's from

I gave up on those things a few weeks after they were released as I couldn't get them to work reliably then!! It was probably the newness or my PC, but that seemed to be the beginning of things being

Yeah, I've never had to bother with it either, but I couldn't get one to authenticate with a processor and Online Help mentioned checking the clock. The time was wrong, and I was able to change that,

Ditto to what others have said. Here's a another item: - Only because I actually had an issue with this, is there a chance (based on your DHCP settings) that you ran out of DHCP IP addresses for you

Hi Tom, I have code docs for the newer VMS and IPC boxes, but I can't share them on the forum. Reach out directly and I'll see what I can do... chris at eicustom dot com

Mmmm... I've never set time for the GW's. My initial view is that they don't have their own time, thus there's no settings for this. TIME, TIMEDATE, just returns the current time and date with UTC-0?

Hi Ryan Do you happen to have the raw data of these codes in an excel format? Thanks. Tom

Hi Did someone already used the IPX800 from GCE-Electronics with Crestron ? https://www.gce-electronics.com/fr/accueil/1799-automate-ethernet-ipx800-v5.html I can't find anything on internet although

I am not familiar with that unit but I have seen that behavior before, I got it when the client has an older/cheap Wi-Fi card , and it fails to connect using wpa3. I downgrade to wpa2 and got them

Stefan, Was just reviewing this post.? We are just finishing up our new home build and I am setting up our network which includes numerous VLANs (using pfsense).? I am quite versed in pfsense but

Often the reason for that is simply too weak a signal. You may think you have "full signal using one access point to all 4 corners of my yard", but however strong the AP signal is, it needs to be able

Slightly off topic but I have a strange issue with a Unify UAP-LR access point.? Oh, by the way LR means long range and yes, it rocks. I have full signal using one access point to all 4 corners of my

Has anybody ever managed to make the CSP-LIR-USB work on a M Series Mac in parallels. Ive heard rumours that somebody managed it, but cant get to the bottom of what drivers etc they used!

Not here to defend Bose at all, but the one job I did with their DSP (ESP-880) was pretty flawless. I could hit this thing with 20 commands at once and it did them all immediately, every time.

Does anyone know the command to set the Time Zone on the CEN-GWEXER? There isn't an option in System Info.? I've tried the following in Text Console. TIMEDATE - shows the current time, but doesn't