开云体育

Sounds like a fancy solution,? but playing with VLC...it doesn't fit.

Update: I updated my software about a week ago (DBs, TBx, D3, SMW) and this seemed to fix the schedule.dat file being properly loaded/updated to the NVRAM/D3_Pro folder as expected. I also see that

The CP950 might be installed for a reason as it is a real cinema processor required to playback cinema DCI content. If that?s not a requirement, then i?d agree to ditch it. Cheers, Thorsten Von:

Sounds like you have already have the answer, ditch the CP950 and go with one you know works….No point trying too push the bolder uphill, you’ll waste you life trying to resolve manufacturer

Thank you all for your input. The problem is that any teacher (it's a classroom in a 7.1 movie theater) can come with a different PC everytime and to make sure that every device is compatible is not

Not sure this helps other than to confirm we have multiple DMPS-4K-350-C units with no audio problems using Windows based dual screen displays, Apple TVs, client windows based PCs and HDMI input for

Some players/drivers have a setting to play “silent noise” when no content is playing to keep the HDMI audio sync steady. Perhaps it?s worth looking into that direction. Cheers, Thorsten Von:

Hi Olivier, I experienced similar issues with different AV products. Some sources seem to stop outputting embedded audio after a few seconds after audio playback is stopped. I noticed that the AV

It was horizon switch for me. I delete it and recreated it. Michael Restrepo | Owner Restrepo Innovations 825 Windham Court North Wyckoff, NJ 07481 Office | 201.925.0059 Direct | 201.952.4624 Email |

Let's not rush things...take it nice and slow like...

I wonder if the PC has some sort of software that changes the audio format, and when you start video it switches it to PCM. I would try: Enable applications exclusive option in the sound card settings

Hello all, I need your input for this weird behaviour. System: DMTX-4KZ-302C ---> DMPS-4K-350C -->? HDMI out to a Dolby CP-950 sound processor. DMPS and enpoints are configured to pass untouched

I would just find an old RMC3, which will run the prowl interface and EISC it to your CP2e program...way less of a science project... Depending on the size of the program you could also just convert

Short of upgrading the processor, I have this crazy (but reliably working) idea of using an industrial-quality Raspberry Pi (such as the Iono Pi from Sfera Labs, $300) and using it to do work that's

Hello everyone, One of my client have an old Crestron setup. Now he wants to receive push notifications on his mobile. Prowl & Pushover don't works with 2 series processors. Can anyone help me.

I have only noticed the overlay when using h264. I haven't had the same issue with MJPEG

I have found that some cameras (non-axis) will leave a video over-lay on screen when the iOS Crestron Go app is closed or put in the background. This is despite using the same join for enable/disable

As long as the Video is “enabled” it will show over all other SP. you need to enable/disable the video with your SP visibility.

Using the Embedded Video Smart Graphic (version 2.19.00.99) control to show a RTSP stream from a camera. It works find on the TS770, but when I convert over to the Crestron App and bring it up on the

Withings is a French technology company that manufactures some of the most advanced consumer health devices including health focused smart watches, connected blood pressure monitors, smart scales, and