开云体育

In D3 go to other devices. Right click a room and add remote system export. Select whatever version you like to use. Double click the new remote system and select what you want to export, make sure

Anyone know what the best setup for this would be? I have a cp3 running a D3 program on a large multi house project. i want the cp3 to run the lighting on the whole property, but i have 4 more

We have the Alarm programmer set up the ELK so that the F keys (F1 F2 F3 F4) do things like bypass or panic as needed. That way we can label a button "Bypass" and send F4 to elk which is programmed to

Here's an idea...how about no custom versions...just make one version that actually works!! Think if instead of spending all the time that we spend trying to make things work that have not been fully

I can confirm having also tried this with a C4 version that it did not seem to call using rava:CRESTRON as the number, and the Crestron section under Services>Phone>Calls was still missing after

updated download link; https://www.dropbox.com/s/74i10bopujkgnxd/Cisco%20SX%20Recent%20Calls_compiled.zip?dl=0

Yes, that?s exactly what i?m doing with LG TVs. I?m using a self-made WoL-SIMPL+ module, but it?s just doing what you desscibe: send magic packet followed by 16 times the MAC of the device. Works

FWIW I had the same issue using the LG CCD on one particular site. I don't know why Crestron can't just fix the CCD's for Samsung and LG considering how popular their TVs are, rather than just telling

Erick, so it you have a sip server or pbx ip, the savant version of the 2N work normally? Audio and video routed ti the crestron touchpanels? NFH

I am not a C# programmer. Do you have a module with this command I can use in SIMPL? This would be extremely helpful Thanks Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________

I have put the 2n firmware on the C4 ones. They are still missing Rava. Using a SIP server worked for what I needed.

I send a WOL packet using C# bypassing the power on command in the CCD driver.? It turns the TV on and then the Samsung CCD will connect and control.? Actually works good this way.? I had the same

Thanks, Jay!

This isn't something that bothers me but for those that want to create a perfect copy of the standard ELK keypad in crestron I believe, if memory serves me correctly, that there are a few things you

Anyone out there controlling ST 2110 Nmos routing from a crestron processor? Josh

Snowing No, Raining Yes.? The rain sensor on the tempest is haptic so it can't detect the sound of snow hitting it.? The only snow sensors I'm aware of are those that are sold with driveway/pathway

Has anyone actually tried it ie getting the firmware link off the 2n website and uploading it to the hardware ?

Jay, Does the WF unit/modules give local weather triggering, like 'its snowing'?? Also, does it provide any predictive info??? (I'm thinking not on this one...)

I came across the Control4 variant recently. I too was told by Axis support that you cannot reflash it to get back to the "standard" version which includes the Crestron RAVA stuff. I don't believe

i have the same problem, the IP-TABLE erase after device reboot