开云体育

Hey what do you guys use for wireless panels now.? Ipads?? TST-902 Discontinued and the TST-1080 not compatible with smart graphics. Is there nice iPad dock table top and wall mount to helps this.?

Thanks Lincoln.? Both the processor and my laptop are on the same wired network? (no WiFi involved) and same VLAN. Thanks again Jay

Are you on the same (wired) network? I have seen over VPNs and WiFi any minor hiccup in the connection (wireless renegotiating authentication, etc.) that seemed transparent to most other things makes

Have you tried what MSTC suggested? That's really your best chance to figure this out.

Thanks Tony. Since I don't gain gain any revenue from the articles I write, and little to no revenue from the drivers on my GitHub, it is hard to justify spending money on 3rd party tools.? From a

Thanks Lincoln As I said earlier in the thread, I have SETLOGOFFIDLETIME set to infinite.? Is there another console command that I'm not aware of that will fix this? Thanks Jay

Thanks Mark. I copied the link from an email sent to my by RTI and it says one thing but points to the original article. There is the correct link

I have a system that controls 4 of the AW-UE150 cameras that should be very similar.? I purchased the module from?https://www.tbdenterprises.ca/product/panasonic-hd-4k-integrated-camera-module/

I am using the Panasonic module from Crestron (PTZ Series) for this camera, and I am not having any luck. I never see the camera connected in FB and I currently just have the module loaded onto a PRO4

part 2 links to part 1?

Apparently there’s a module now from Intersystems that somebody has already tested and it works. It’s available both for CH and SIMPL. Only problem is that the set up with google is really

Calling all Crestron Dealers: We have finally received 4-CLX-2DIMU8 modules from Crestron.? They are NIB units. If any dealer has a need kindly reach out to me at: info@... or

FYI, there are a couple of third-party Debugger alternatives that I've heard work fairly well. I haven't personally used them, and can't remember the names at the moment, but maybe someone else will

Part of it is by default the 4 series will automatically log you out after 20 minutes of "inactivity" but the activity counter seems to only be reset on traffic from you to the processor -- the

It used to work for me.? In the past I have run debugger all night on a customer's system to catch a weird event that randomly took place.? However, I fully admit that I don't remember which

Only once or twice in all these years I have been able to get debugger to run for more than a handful of hours. Probably was a 2-series. On these 3 and especially 4 series even with the idle time set

You do need to enable the API (I forget what ys labeled in the menu..."network remote" or something along those lines) on each device you want to control, including the minis. From there just point

I've controlled several Tivo Minis on various projects using the ethernet module. However, the technicians always took care of configuring the boxes. I suspect there's a setting somewhere to enable

My latest article is the second in a three part series on the resilient smart home.? The first article focused on making the smart home systems in a home resilient to natural disasters, and other

I have SETLOGOFFIDLETIME set to infinte on my CP4 so I can run SimplDebugger for extended periods of time to capture spurious issues when I'm debugging driver code.? Unfortunately, my experience is