开云体育

Instead of using the AppleTV IR commands drop in a simple Sony universal blu-ray set instead. ?Next step on the ATV go to settings then remotes then learn remote…name it whatever you want at that

In that PUSH Inc function make sure it is a 3 not a 4.? 3 is up, 4 is down. this: IncrementCh(ch,3); not this: IncrementCh(ch,4);

So, I made the changes to the Simpl module, but I'm still getting the lower on both Inc and Dec. I look in debugger and it's sending the same string for both....

Thanks Scott, I will give that a shot!

I'm just finishing a project where I used this nLight module and encountered the same problem as you.? There is an error in the handling of the PUSH ChInc.? It has both a increase and then a

Hey djkevinz, Thanks for creating this module! I am using it for a project and I am using the ChInc and ChDec as well as on/off. Everything is working great except for ChInc. ChInc is Dimming the

Ken I have a job coming up with a X700. Has this IP module been reliable for you?

Audiocontrol amps are fully supported and easy to integrate into Home without a license. DSP and the web based controls are far better than SWAMP was.

Thanks guys, This project is an upgrade to a system and the VTP file already has joins but the previous guy did some whacky stuff and it looked like running all the SG traffic is going to cause some

The best option is to go to av switchers under drivers and see what is available.? Most, if not all, of the drivers for non-crestron devices are 3rd party, but in this list, certified.? Some cost

**** DM NVX? Image Preview: Security Warning **** https://community.crestron.com/s/article/id-1001640

FYI, I just added a GWEXER to an existing CP4 system (with AUTH of course...) After the usual hash of getting these units online with themselves and setting the IP table entry, I had a similar

Started doing some testing with IR thru the MXnet devices. An issue that I see (not specific to MXnet) relates to the recent issues we found with the Apple TV. ex: the Select command does 2-3 things

You wont get errors that way as long as you dont have jammed or unconnected signals, but why are you sending the regular panel joins thru the crosspoints but not your SG joins? You went thru the

To get around the forced authentication on CEN-GWEXERs I always roll back the firmware to cen-gwexer_1.4230.00015.puf, then reload the latest firmware.? If the gateway is configured with older

Hi All, I am streaming the preview images to a TSW but every couple of days I get a Certificate Unknown message on the panel and it's not user-friendly. Has anyone found a solution to this? Thank you

Thanks a lot, problem disappeared once done the account setup in both devices :)

Crosspoint is a best practice. Its better to pass all the signals from the Crosspoint in order to avoid any confusion. And if you don't use Crosspoint then you just need to change the logic of the

Hey Everyone, I am programming a project with multiple touchpanels and a lot of sources so I decided to try my hand at Crosspoints. I pretty much get the jist of how it all works but I'm curious if

Hey Joe, were you able to control the ILC lighting interface? Im stuck with the same issue you had