¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: CCD and Multizone Control

 

I have CLZs for both Pre and Post-200. Contact me offline if I can help...
Re: Hey Google - Australia

 

Just got around to trying this and it worked perfectly.? Thanks for this info!

Is there a trick to adding more devices and updating Google to reflect the added devices? It seems that every time I make a change (still messing around with various things) I need to completely delete the crestron stuff from Google home app, then de-register my processor on the admin portal and go through the whole process from scratch to grt it up and running again.?

I read a thread on here recently where someone detailed the easy way to add/update Google home devices but I've been trawling threads for the last half hour and I can't bloody find it again!!?
Re: CCD and Multizone Control

 

Must not be running the 200. databases then?
Re: CCD and Multizone Control

 

I'm old school, I would use the 'Sony STR-ZAxx v1.1.umc' module.
Reach out directly if you can't find it...
CCD and Multizone Control

 

Have a Sony STR-ZA1100ES.? How do you tell the CCD AV Receiver Ethernet 2.0 which zone to control?
Re: Crestron Go app questions

 

I call BS on that.
They said they had to because they sent out a release that caused all sorts of problems and Apple wouldn't allow them to send out the old one. Ok, so instead of taking the old one and changing the revision number and sending that out, they decided to create a new app and wait for that to be approved.
Seems to me it was a way to get extra revenue on an app that¡¯s junk and has all sorts of issues. Oh wait, they added support for retina. But did they, since you still have to develop the panels in the old resolution...
Re: Crestron Go app questions

 

The separated tablet and phone purchases are instigated by Apple. It isn't a Crestron choice.
As is the entire shift to Crestron go.

On Thu, Nov 2, 2023, 8:31 p.m. ckangis <chris@...> wrote:
As Eric said, specifically the iOS Settings/ Crestron GO App Setting, disable 'Check for Update'.
As mentioned it will speed it up a bit BUT if you make a change to the project, the client will need to manually force an update...not so bad after deployment is basically finalized...

And yes, $ 100.00 bucks X2 for nothing but potential (we do all the work)...
They had an opportunity to go free when they had the Crestron App >> Crestron GO debacle, but no...
It is really petty for a Billion $$ plus company, given the thousands not millions of apps purchased...? I can't imagine that the revenue for it is even noticeable...

Re: Crestron Go app questions

 

As Eric said, specifically the iOS Settings/ Crestron GO App Setting, disable 'Check for Update'.
As mentioned it will speed it up a bit BUT if you make a change to the project, the client will need to manually force an update...not so bad after deployment is basically finalized...

And yes, $ 100.00 bucks X2 for nothing but potential (we do all the work)...
They had an opportunity to go free when they had the Crestron App >> Crestron GO debacle, but no...
It is really petty for a Billion $$ plus company, given the thousands not millions of apps purchased...? I can't imagine that the revenue for it is even noticeable...
Re: Crestron Go app questions

 

In the app settings you can disable Check for Update. That will speed it up a bit.
DIN-1DIMU4

 

I replaced my CLX-1DIM4 with a brand new DIN-1DIMU4, but in Toolbox it shows that it is a DIN-1DIM4. I have updated the firmware to the latest ones, but it still show as DIN-1DIM4.?

How can I make sure it reflects DIN-1DIMU4??

I have another unit of DIN-1DIMU4 running on the same rack and it shows the unit properly as DIN-1DIMU4. Thus it's not an installation problem. Could it be a bogus unit that manufacturer labeled it wrongly?
Re: NVX With Cisco 9300

 

¿ªÔÆÌåÓý

If LLDP cannot be enabled it would be best to have a conversation about ¡°Why¡± and see if the objection can be overcome through other means (e.g. by disabling/blocking LLDP on specific ports/port ranges) ¨C IMO static POE is a bit hackish and the last resort.

?

--

Lincoln King-Cliby

Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Diamond)
ControlWorks Consulting, LLC
Direct: (+1)440.771.4807 | Cleveland: (+1)440.449.1100? | Boston: (+1)508.695.0188 | DC: (+1)202.381.9070?
Crestron Services Provider | Biamp Authorized Independent Programmers | Extron Qualified Independent Programmer

?

?

?

From: [email protected] <[email protected]> On Behalf Of zac.sparrow via groups.io
Sent: Thursday, November 2, 2023 3:45 PM
To: [email protected]
Subject: Re: [crestron] NVX With Cisco 9300

?

If anyone is having POE issues with Catalysts, turn on LLDP protocol with following command:
LLdp run

This will allow NVX endpoints to properly negotiate power. They may work but only pulling 15.4 watts, which would not be enough.

If lldp can not be enabled, you can set static POE power per port.

Crestron Go app questions

 

from a client:
  • If the Crestron App is running as a background App and you bring it to the foreground, there is a 5 second waiting time for the App to reconnect to the system. This is a Crestron App issue, either configuration issue or poor design. (Crestron can design the backroom connectivity as a service that runs even if the App is running in the background.) I realize you may not be able to do anything about this, but Crestron should receive feedback.
In my humble opinion, it is unreasonable that Crestron charges separately for Tablet versus Cellphone App. Looks like a money grab on their part. Given that all the programming had to be redone to be compatible with Crestron backroom software updates, you would think Crestron would consider softening the blow by not charging much or anything for the App or giving existing customers an upgrade discount from previous App. Instead, a whopping $250. Again, this is not your fault. Just stating my discontentment from someone who has some experience in the business of selling software
any way to fix the 1st issue i.e. to make it connect faster?
Re: NVX With Cisco 9300

 

If anyone is having POE issues with Catalysts, turn on LLDP protocol with following command:
LLdp run

This will allow NVX endpoints to properly negotiate power. They may work but only pulling 15.4 watts, which would not be enough.

If lldp can not be enabled, you can set static POE power per port.
Re: NVX With Cisco 9300

  

29 C9300 Switches
2 Core Switches
40G links to the Cores.
890 and growing NVX Endpoints.
Dozens of Touch panels, Audio, etc.
10 4 series processors

Cores are the Querier 

Each port of the C9300 looks like this:
interface GigabitEthernet1/0/5
 switchport access vlan 350
 switchport mode access
 power inline port 2-event
 no ip igmp snooping tcn flood

No Issues.
Had to move the DANTE devices to its own VLAN because of message traffic and intermittent clocking but NVX and Control is rock solid.

Carl Arnold
CVS Inc
Re: UC Engine reliability

 

¿ªÔÆÌåÓý

We have a new install which is not in direct connect mode. The touchpanel seems to not reconnect after nightly reboot. We are using the uc engines static ip. Crestron says it¡¯s got to be a network issue. But we don¡¯t know what the network issue could be exactly.?

On Nov 1, 2023, at 4:20 PM, kurt savill via groups.io <kurtsavill@...> wrote:

?
Hi all,

Appreciate you all taking time out of your day to reply to this topic.

Zac and Kyle, that seems to be our consensus aswell regarding Zoom stability, far less call outs.

Bruce, yes this relates to the dreaded usb to Ethernet adapter. Crestron of past, recommend this to us to negate any network issues, the irony now is this seems the less reliable route!

As Chris rightly pointed out we are the guinea pigs! That does wear thin pretty quick though and certainly in the eyes of the client, we are where the buck stops.

It would be nice to for Crestron to take responsibility rather than saying Microsoft this and Microsoft that, if there¡¯s a Crestron badge on it¡­.its for them to take ownership!

Is it the RL2 you were mentioning Lincoln? If it is I hated those things with a passion lol.



Kind regards,

?

Kurt Savill?

? ? ??

? ? ? ? ? ? ? ? ? ? ? ? ? ? ?


?
Re: DMC-VID-RCA-D

 

I don't think so, since that would need a DSP to conver DD/DTS to PCM. PCM multichannel is not possible via toslink/coaxial.

Also, note that with that card, when using the digital inputs, you will only get audio on analog outs of the output cards - it will be missing from the HDMI out stream (talking about 2ch PCM)
DMC-VID-RCA-D

 

Does anyone know if the DMC-VID-RCA-D will downmix the digital input to 2-channel for the DMC-HDO analog output?
Re: Control JVC IP camera KY-PZ100 #cp4 #crestron #http

 

¿ªÔÆÌåÓý

I've been playing with the bigger brother to this unit - the KY-PZ510 using an old AV2

I have used this manual: to control it.

Basically I opened up an UDP connection to the IP on port 1259 and used a SIO to send VISCA commands.
What I sent for the "Home" command was: \x81\x01\x06\x04\xff? (had to play around to figure out the "X" in the command sheet was 1 for me).

HTH,
Bryan


On 11/1/2023 11:03 PM, phamviettrungbeoqs@... wrote:

Hi, I have a problem with digest authentication of this camera
I'm using a CP4 controller and I haven't figured out how to send this camera's API commands via CP4's TCP/IP port.
Can anyone give me suggestions on programming this camera? It would be great if anyone has done a project on this camera and has programming documents and modules for me and others to refer to.
Here is API document of JVC KY-PZ100 IP camera:?

Control JVC IP camera KY-PZ100 #cp4 #crestron #http

 

Hi, I have a problem with digest authentication of this camera
I'm using a CP4 controller and I haven't figured out how to send this camera's API commands via CP4's TCP/IP port.
Can anyone give me suggestions on programming this camera? It would be great if anyone has done a project on this camera and has programming documents and modules for me and others to refer to.
Here is API document of JVC KY-PZ100 IP camera:?
Re: Non-Crestron Audio Player Recommendation? #crestron

 

Curious what your use case is, I know we have sold a lot of?
Mostly because they are something that is more interactive for our end users.?
5301 - 5320 of 256496