开云体育

Hi Michael! We purchased Josh's module and have it working great for controlling the ICMP (had to downgrade from a 4 series to 3 series to make it work but that's OK - it's a known issue with later 4

a little not what I wanted, but you gave useful advice. Thank you.

It's so long phrase. I use Alexa Routines. For example, phrase (routine) "Alexa, hello!" start macros with voice greeting and execute some long command/commands.

It will look something like this: #Define_Constant MaxElements 20 Digital_Input Test String Array1[MaxElements][8], Array2[MaxElements][8]; Integer Array3[130]; Push Test { Integer i; SetArray(Array3,

Yes, I only need the numbers of matching elements of the arrays from which to build array3

Are you just trying to see if each element of array1 and arra2 equal each other? If they don't converter them to integers, using array1 as the element and array2 as the value for array3?

Have a nice day, everyone. there is a task, the meaning is below: string array1[a][8]; string array2[b][8]; integer array3 [c];? ? ? ? ? ? ? ? ? ? ? ? ? ?//you need to create a third

Do you have a link for this module? I searched around a bit and couldn’t find it online

Thanks for your reply. But I still don't understand why the processor works fine when we just restart the program and doesn't work immediately after turning on the power. This is almost the same as if

Dave, is this something that you recommend to be run for all 'N' processors? of is this just to try to solve this issue?? TIA! Though I expressly forbid the 'N' units on our projects, we did have a

Just FYI, the module that Josh Blanton sells to control the media server also has full projector controls for power/dowser/lamp/macro. Michael

Did you set STARTPROGAFTERROUTER ON?

Hi! The TCP/IP Server symbol (port 888) does not work on the processor CP4N after a hard reset or power cycle. But it works when the program is restarted.?A program consisting of only this one symbol

Thank you!

Thanks Jeremy. The issue is a known problem in the LwIP driver used by the device manufacturer.?? That being said, since I have no control over fixing the device, I was hoping for a way to force the

Agreed. A FW update is likely needed for compatibility, based on timeframes shown in release notes. 3-Series FW v1.503 is from 2018, while Voice Control v2.x modules are from Mar.2021.

This is not HTTP Chunked Transfer Encoding, this is a problem with the device expecting the entire request to appear in the first packet received. This is never a safe assumption with TCP connections

Yes, it's a known issue with only v4.25 that was reported to the SIMPL team shortly after that build's release. Suspect related to the new CTRL+Enter feature that allows for adding multiple instances

Igor, thanks for valuable information. The embarrassing thing here is that I am replacing Control 4 with Crestron, just for this theater setup, because I can use a module for displaying and

Tony, I have only had this happen once. That one time it renamed all the inputs and the first half of the outputs on a module. I just figured I had a spelling error on those outputs.