开云体育

I got this resolved, but I also noticed that the web interface parity setting for the iTach does not match the telnet interface setting. [email protected]> wrote:

Has anybody used Poly Eagle Eye IV cameras with Global Cache iTach serial ports?? I have two EE4 cameras here that let me power them on and off from my VC-4 instance, but will not P, T, or Z.? They

No problem. NVX can even run on Cat5e so you have more than enough... I had a grounding issue with using unshielded Cat6 and a POE switch (Injector/power supply) early on. Had to ground the remote

My current DM system is now starting to show it's age. My house is currently wired with CAT6 & DM-8G cable. I'm planning on using the 8G infra-structure for NVX as re-wiring is simply not an option in

Ask it from Crestron. It’s not very difficult.

Thanks for the heads up, will give a try. Second thought, i think i saw this setting and already change to Always ON.....

EPson has a new setting in their projectors. Go under “AV Settings” under the menu, and turn to ALWAYS ON. By default it is set to only while on. I had to do this to a batch of L510U and L530U

I have 3 Epson projectors works fine on Roomview command via HDBT. The issue i have is one projector will lose Lan connection once it is power off. I can see at Crestron DMxMD, that DM port RJ45 Green

Hey All, Any chance anyone has a module for this unit? Customer swapped it out on their own, and of course nothing works. I have had a look at their protocol manual and it's just mind boggling. Was

I don't see the C2N-DB12 as a class but I was able to register it as CNXB12 without any errors, so does that means it should be fine? Thanks

"Crestron Connected" (API v2) vs "Roomview Connected" (API v1) definition choice should be informed by whether or not the display supports secure connections & credentials. Refer to the information &

Does anyone have en example of how to debug with JB Rider? Thanks

Just had this issue pop up yesterday, on a system that had been running for several months.? Two projectors running on 08 and 09.? On a VC-4.? Wouldn't re-associate.? I finally punted and just

I second what Oliver said, I just tried to control a Sony with the Crestron Connected Display symbol and it would connect but not control. Swapped to the?"Roomview Connected Display" module and it

Do you have the projector's LAN enabled over the HDBaseT connection (if that's what you're using)? Years ago, I had one that started working after I updated the projector's firmware. -- Josh Winn The

setbyte did its job. thank you very much!

Its not sending ascii, its sending hex. In your makestring you are using \xB7%08lX l: Specifies a LONG_INTEGER or UNSIGNED_LONG_INTEGER will follow, and is followed by d, u, x, or X. X: ?Specifies an

Guys, I have this weird problem with Simpl+. I have posted the same to the FB group also so sorry if you see it again. I want to send a string to a device through UDP. The string consists of 10 bytes.

I always use the "Roomview Connected Display" module without problems. The Online_Fb output won't work though, but you will see it connected in the IP table. I don't know what else to tell you. I use

Looking at taking my 301 course finally. Anyone have a copy of the current practical Entrance Exam? Also anything I should study up on to pass the multiple choice exam?