Hi All,
anyone have one of these that they'd like to get rid of??...:)
TIA

开云体育

IRUSB or the various others will work to control the TV, but you wont be able to control power or input shifts. Also, the IRUSB will often "wake" TV's up that have been powered off, so you are likely better off with the github repo suggested earlier.

Yes, 99-100... After they press the upgrade button, and agree to pay the $99.00, it thinks, and comes back and says "sussessfully restored from previous purchase"

I've seen this issue, EX: even when you first activate the husband's phone and purchase the app, then setup the wife's phone (on the same Apple ID) it will often prompt thru the purchase of the app again. Most of the time it does not actually charge the account (in the early days of the APP, it was a disaster). I just tell the client to check to make sure that they weren't charged a second time...
NOTE:? The Phone GO app and the Tablet GO app are separate purchases on any one Apple ID (i.e. $ 100 x $ 100 = $ 200.00)

The whole thing was completely misguided in its design...

Thanks for the info. It was Crestron Go they had purchased previously. Same App. Will have them try it this way. Hopefully it works given its an “In App” purchase to begin with.

That's why I was not understanding the thread, I figured they were talking about a brand new device Crestron had just put out that I didn't hear about yet.? ?

开云体育

I?d give IRUSB a try.
It?s more aimed towards Android based media player boxes, but it should work on any Android based device with a supported USB port.

Cheers,
Thorsten

I tried with a Crestron certified programmer this whole morning to try to get it work, it doesn't... very frustrating.

Whatever commands we sent has no response from the TV.

Lost, don't know what to do next. Sigh.?

Hey guys,

I'm just tinkering around with an NVIDIA Shield Pro & the IRUSB device+app and having some issues. I cant seem to get any of the QHIDCODE's to work which is a bit weird! I've tested it with an RMC3 and VC4, I've also tested a bunch of different codes and im running everything through an SIO > TCP/IP Client using the IP address of the device & port 9093. I've tried un-installing & reinstalling the app, clearing the app cache, switching between the USB ports, etc. Im getting successful connection feedback from the TCP/IP client, just no luck with commands.

Is there anything im doing wrong? I feel like it'll be something obvious..?

I feel so much better with more people not looking at the date on the OP... : o

Or, you can use a good 'ol ST-VS in there, and do sync detection off the composite video feed to determine the true state of power of the VCR, so when you send it the "power toggle" command, you have something that give you true feedback.? Boy that takes me back--The grab-bag of oddities of various sync sensors, current sensors, and the old sensors that would go on the back of tube TV's do detect the magnetic field when it was on.? I'm glad I haven't messed with those in a long time...? around as long as programming those CNMSX's and the horrible ST-CP's (which were overused in too many systems).

--
Jason Mussetter

Control Systems Designer

Mussetter Programming Services
www.mpsav.com

Sounds like they are trying to purchase rather than download previously purchased apps. ? ? Was it Go or Crestron for X that was previously purchased? ? ?Get them to go to the app store and click on their logo to see their account and then click Purchased. ? They should be able to download the version they purchased.

It's been awhile since I've had to do this... have a customer with a new iPhone and they have re-downloaded the Crestron Go App.
They have already purchased the App on the Apple ID in question. It's prompting them that they have to either purchase or restore
a previous upgrade to view their project. It tells them to hit the Upgrade button to continue
and when they do the get a "Double click to Pay" screen with the full price listed at the bottom.

Just want to be sure they are not going to be double charged again...the Apple prompts are misleading...

TIA

Bah!? Got me not looking at dates and bumps!

Shesh, that equipment is probably older than some of the programmers on this site.

I dont, never have nor ever would use system builder but I know from past experience troubleshooting the code of others that have used it that it populates every signal on every device. This is the reason I asked the question about the device programming method. While we are grandstanding, as my Crestron programming career began in 1998, I started with Workshop and Panel or whatever they were called at the time (if memory serves me) and I have seen dare I say, most scenario's with defunct software implimentation such as System Builder. My point with my question, was that unless power toggling was specifically programmed into the switching of the code (such as could be done with System Builder without the programmer knowing it), the toggling would have to be done by other means. Concerning the rest of the system, in particular a CNCS could be in play, the CNMSX has no AV capabilities, so CEC control is out of the question unless there is other pertinent gear possibly of the same generation as the CNMSX that could be passing CEC commands. Maybe even products from the QM line.

If I were in the situation and had programmed the code and knew for certain that I didnt have this toggling action as part of the code, I would switch sources, which by my understanding of the issue, would turn a device on via IR, I would then pull the IR probe and switch sources again to determine if it is infact an IR signal performing the action. The same could be done with the HDMI to determine if there unintentional CEC commands floating around (in relation to the DVD player of course).