but did the github api worked for any of you?
I'm not there to try, but this colleage says tv is not responding to anything except to pings...
|
Hi All,
From the test have made, it was not working because of the firewall of the Virtual Machine.
I have opened the port listed and now everything is working fine.
Regards,
|
Just uploaded it to the Files section.
|
Anyone happen to have an IR file for this?
?
The client seems to have misplaced the remote I was expecting to learn¡
?
--
Lincoln King-Cliby
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Diamond)
ControlWorks Consulting, LLC
Direct: (+1)440.771.4807 | Cleveland: (+1)440.449.1100? | Boston: (+1)508.695.0188 | DC: (+1)202.381.9070?
Crestron Services Provider | Biamp Authorized Independent Programmers | Extron Qualified Independent Programmer
?
|
Re: Q_SYS Crestron Certified Modules version 5.0 and 5.1
#cp4
#q-sys
In a similar but different vein - trying to upgrade to 5.2 modules has been a complete bust.? No connectivity to core at all.? Does anyone have any prevailing wisdom that applies?
|
Looking for assistance controlling the same device.? Having some difficulty with sending the commands in Simpl# correctly.? I have verified the API and strings in Postman and they work there. On a short timeline to have this working, so any assistance would be much appreciated.
|
Is CEN-NSP-1 Still Viable? FW: "UPDATE FAILED"
I'm trying to apply firmware update remotely via VPN to a CEN-NSP-1 (1.002.26 to 1.002.0035.001).
No matter how I try, multiple power cycles, etc. I still get "UPDATE FAILED".
Is this a dead issue?
Thanks
Mark
|
Re: Needed: (1) CEN-IO-RY-104 Relay interface
I currently have an IORELAY Proxr 4-Channel Relay Controller with Ethernet Control on eBay for sale, might work for you. I'm willing to part with it for less than the listed price.
Message me at guzzep at yahoo dot com.
g
On Monday, March 20, 2023 at 10:02:18 AM EDT, jbasen <jay.m.basen@...> wrote:
If you can¡¯t find one, take a look at Shelly¡¯s selection of IoT relays. I¡¯ve found Shelly¡¯s products to be of high quality and there is a full driver set on my Github for integrating them with a Crestron system?
Hope this helps?
Jay
On Mon, Mar 20, 2023 at 7:53 AM ckangis < chris@...> wrote: Hi All,
anyone have one of these that they'd like to get rid of??...:)
TIA
|
Hi All,
I'm trying to make a VC-4 and a Sonos work all together with SIMPL Windows programming, but it doesn't work.
I'm using Sonos System Module v3.1.1, Sonos Device Module v3.1.1, Sonos Volume Manager v3.1.1, ...
Each zone has the same name has the one in the Sonos App
I'm able to ping the Sonos devices from the Virtual Machine, but I'm not able to see the Sonos device in the UI nor in SIMPL Debugger.
Has anyone an idea on how to solve this?
Regards,
|
Re: Needed: (1) CEN-IO-RY-104 Relay interface
If you can¡¯t find one, take a look at Shelly¡¯s selection of IoT relays. I¡¯ve found Shelly¡¯s products to be of high quality and there is a full driver set on my Github for integrating them with a Crestron system?
Hope this helps?
Jay
On Mon, Mar 20, 2023 at 7:53 AM ckangis < chris@...> wrote: Hi All,
anyone have one of these that they'd like to get rid of??...:)
TIA
|
Needed: (1) CEN-IO-RY-104 Relay interface
Hi All,
anyone have one of these that they'd like to get rid of??...:)
TIA
|
Good point ¨C true. ? Cheers, Thorsten ? ? IRUSB or the various others will work to control the TV, but you wont be able to control power or input shifts. Also, the IRUSB will often "wake" TV's up that have been powered off, so you are likely better off with the github repo suggested earlier.
|
IRUSB or the various others will work to control the TV, but you wont be able to control power or input shifts. Also, the IRUSB will often "wake" TV's up that have been powered off, so you are likely better off with the github repo suggested earlier.
|
Re: Crestron Go - Restore Purchase process on new device
Yes, 99-100... After they press the upgrade button, and agree to pay the $99.00, it thinks, and comes back and says "sussessfully restored from previous purchase"
|
Re: Crestron Go - Restore Purchase process on new device
I've seen this issue, EX: even when you first activate the husband's phone and purchase the app, then setup the wife's phone (on the same Apple ID) it will often prompt thru the purchase of the app again. Most of the time it does not actually charge the account (in the early days of the APP, it was a disaster). I just tell the client to check to make sure that they weren't charged a second time...
NOTE:? The Phone GO app and the Tablet GO app are separate purchases on any one Apple ID (i.e. $ 100 x $ 100 = $ 200.00)
The whole thing was completely misguided in its design...
|
Re: Crestron Go - Restore Purchase process on new device
Thanks for the info. It was Crestron Go they had purchased previously. Same App. Will have them try it this way. Hopefully it works given its an ¡°In App¡± purchase to begin with.
|
That's why I was not understanding the thread, I figured they were talking about a brand new device Crestron had just put out that I didn't hear about yet.? ?
|
Re: NVIDIA Shield and IRUSb
Hm, unfortunately, i can?t say much more than this is how it should work¡ I?m using a \x0D at the end of the commands. Sending a ¡°QSTATVER\x0D¡± should get you a response. ? Cheers, Thorsten ? ? ? ? Hey guys,
I'm just tinkering around with an NVIDIA Shield Pro & the IRUSB device+app and having some issues. I cant seem to get any of the QHIDCODE's to work which is a bit weird! I've tested it with an RMC3 and VC4, I've also tested a bunch of different codes and im running everything through an SIO > TCP/IP Client using the IP address of the device & port 9093. I've tried un-installing & reinstalling the app, clearing the app cache, switching between the USB ports, etc. Im getting successful connection feedback from the TCP/IP client, just no luck with commands.
Is there anything im doing wrong? I feel like it'll be something obvious..?
|
I?d give IRUSB a try.
It?s more aimed towards Android based media player boxes, but it should work on any Android based device with a supported USB port.
Cheers,
Thorsten
|
I tried with a Crestron certified programmer this whole morning to try to get it work, it doesn't... very frustrating.
Whatever commands we sent has no response from the TV.
Lost, don't know what to do next. Sigh.?
|
Kris K
Jason
CO Cowboy