Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Crestron
- Messages
Search
|
Re: TST-902 over wifi connection keeps disconnecting.
#tst902
Pretty much sums up my experience with them.? Replace with ipads and put it down to a lesson learned. :)?
|
|
Re: TST-902 over wifi connection keeps disconnecting.
#tst902
We have decent experience with the TST-902's.? All of them from systems we take overs because we would never spec them in.? One client had 9 of them across their building and we experienced the same thing.? All of them will drop communication periodically, not update feedback, screen goes blank, etc.? Wifi seemed to be slightly more reliable then the GWEXER however they both sucked.? In the end the only reliable solution we could find for the customer was replacing them with iPads or hardwired TSW panels.? Which in the end was crazy with the client that had 9 of the TST's and each in a wall dock.? When we took the system over they never even realized the panels can be removed from the dock.? They thought they were permanently fixed in the walls.? So, replacing those with in wall TSW panels was a good solution for them.? Crestron telling you they don't know what is going on or haven't seen this issue before is BS.? The issues you're experiencing has appeared on every single one I've ever worked on.??
|
|
Re: IR control thru DM RMC Weirdness
I don't think that the issue is the IR driver, per se, as I've tried a version with the Pulse IR filter applied.
We did some more testing and multiple LG files behaved basically the same way, BUT the tried and true Samsung UN series driver worked fine. It appears to be something about the LG drivers being processed thru the RMC IR output... Granted, I haven't dealt with LG at all more than 2-3 times in the last 5-7 years, but its weird to me that no one seems to have see this issue. there has to be at least 10% of the DM installs that have LG TVs on their RMCs, wouldn't you think?? |
|
Re: DGE100 browser and touchpanel wake
¿ªÔÆÌåÓýOK, thanks. That?s actually exactly the setup i?d like to go for. ? Thanks, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von johnh via groups.io ? I have done this for a dedicated browser only TSW as well as a panel that is just for the Sonos app. Once the panel boots up it goes right into the desired application. You can just have a blank first page, and under Transition Complete Digital Join just use the reserved join needed- for Open Browser it would be 28600. That way then the page is drawn it fires that join and opens the browser. If you add the browser embedded app to that page you can specify the File- Default Path which would be the browser home page.?? |
|
Re: IR control thru DM RMC Weirdness
A trial version can be obtained here: Geoff On Tue, Feb 21, 2023 at 7:27 PM Tony Golden <mrgolden@...> wrote: Geoff Reynolds wrote an IR utility several years ago, that could easily swap the one-time and repeat codes, in addition to a few other useful functions. |
|
Re: IR control thru DM RMC Weirdness
Geoff Reynolds wrote an IR utility several years ago, that could easily swap the one-time and repeat codes, in addition to a few other useful functions.
toggle quoted message
Show quoted text
I no longer have the link, but maybe he'll chime in with it. --- On Monday, February 20, 2023 at 6:35 PM, Steve Kuehn wrote: |
|
Re: IP Table Offline
#simplwindows
FYI, for Crestron IP-controlled products, the Hardware device/IP connection uses only the IP-ID. The connection ip address is a loopback: 127.0.0.1 (except for a few maddening quasi-Crestron devices)
In fact you can't change this... When using non-Crestron devices with for ex: the TCP/IP client symbol, you will need to add a specific IP address (or host name, though I don't recommend this) so that the processor knows who to talk to... |
|
Re: IP Table Offline
#simplwindows
When you create your SIMPL program, you'll define the various devices within the program. Each is assigned to an IPID. When you compile and load your code, the IP Table is automatically configured on the processor, based on your program. There's an option when loading to let the program update the IP Table, so make sure you allow that. So now, your processor knows what connections to expect (touchpanels and other Crestron devices, including Crestron Connected devices), and what connections to initiate (like TCP/IP connections to other controlled devices). For connections the processor is expecting, you'll need to set your touchpanels (for example) to use the same IPID you defined for them in the program, and point them at your processor's IP address. The touchpanel will initiate the connection, and when the processor sees a device connect on that IPID, it'll say "ah, I've been expecting you, and I know you're a touchpanel, and I'm already programmed to know what to do with each join number I might see from you."
-- Josh Winn The LiquidPixel Group |
|
Re: TSR-310 Reset?
Hi Jason,
It would probably be better to start a separate thread for your questions, as I think they are more basic that this one has become, it might help others as well... That said, the need to learn some of the fundamentals (like navigating Toolbox) is critical for someone who is going to manage Crestron systems, especially custom systems vs. Crestron Home, but even that as well... I'd say basic training is probably not appropriate for this forum, though certainly basic questions are always welcome!! Feel free to reach out to me if I can be of assistance |
|
Re: TSR-310 Reset?
Hi guys, I'm new to Crestron and learning as I go, so go easy on me please! I am having problems with a new TSR-310 and getting it connected to my main WiFi network, so I searched and found this thread and figured I'd add to it instead of creating a new thread, if I should create a new thread just let me know.
I can't get my primary WiFi network to display so I can connect to it, it displays my guest network and I've connected to that, but my system is on my primary and so it can't find the system when on the guest network. I do have access to Toolbox, although I really have no idea how to use it, so I fumble through learning as I go, but I can't seem to connect to the remote with a USB cable. I followed the above instructions to reset the remote and I thought it did, but when it rebooted it still had my guest WiFi network locked in and connected, so I don't think it fully rebooted. Can somebody please offer some guidance and help as to what I should try to do next to get this connected to my primary WiFi network? This looks to be a great remote but right now it's just a great paperweight, lol! Thanks! |
|
Re: AnyCon Camera DVR/NVR recorders
Yes we work only with Avycon and Axis for several years now since I've tried to steer us away from Hik and Dahua.
The control is limited tho. There is no API, that comes directly from Alfred who is an engineer there who gives the best and most advanced support to us from time to time.? Since we don't use external control for these, I'm sorry I don't have more relevant info...... But I would say that their onvif support is solid and if you are simply controlling cameras, not playback, you should absolutely try sending IP onvif commands directly to the cameras not the nvr. Beyond that, ask for Alfred ..? and if you do get any updated NVR control please let me know ! C |
|
Sonos Unhandled Exception
Hi All,
I'm seeing this Error Pair continuously on a site with an older Sonos Connect that is still on the 'S1' platform. It seems to work fine for the client, but I'm concerned that it will become an issue. Is this anything that stands out to anyone as something specific, or could it be just the S1 legacy not playing nice with the v3.1.0 module?? I haven't integrated with S1 units for a few years... I see that there's a v3.1.1 module, but the release note just indicates a change to some labeling in the S# side... Anyone have any ideas??? TIA! Error: splusmanagerapp.exe [App 2] # 2023-02-19 13:38:25? # Module S-4.1:S-1.1 : Sonos_Device_Engine_v3_1_0 at line 511: Unhandled Exception: System.Exception: Continue or End flag (E or E) not found
? ?at Crestron.CRPC.JoinTransportServerBase.OnJoinData(String pkt)
? ?at CRPCConnectionHelper.CRPCConnection.OnJoError: splusmanagerapp.exe [App 2] # 2023-02-19 13:38:25? # Module S-4.1:S-1.1 : Sonos_Device_Engine_v3_1_0 at line 511: Unhandled Exception: System.Exception: Continue or End flag (E or E) not found
? ?at Crestron.CRPC.JoinTransportServerBase.OnJoinData(String pkt)
? ?at CRPCConnectionHelper.CRPCConnection.OnJoError: splusmanagerapp.exe [App 2] # 2023-02-19 13:38:25? # inData(String packet)
? ?at SonosLibrary.SimplPlusInterfaces.Impl.MediaPlayerDeviceSimplPlusInterface.MessageIn(String pkt)
? ?at CrestronModule_SONOS_DEVICE_ENGINE_V3_1_0.CrestronModuleClass_SONOS_DEVICE_ENGINE_V3_1_0.FROM_MEDIA_PLAYER_OnChange_32(ObjeError: splusmanagerapp.exe [App 2] # 2023-02-19 13:38:25? # inData(String packet)
? ?at SonosLibrary.SimplPlusInterfaces.Impl.MediaPlayerDeviceSimplPlusInterface.MessageIn(String pkt)
? ?at CrestronModule_SONOS_DEVICE_ENGINE_V3_1_0.CrestronModuleClass_SONOS_DEVICE_ENGINE_V3_1_0.FROM_MEDIA_PLAYER_OnChange_32(ObjeError: splusmanagerapp.exe [App 2] # 2023-02-19 13:38:25? # ct __EventInfo__)
? ?at Amib.Threading.Internal.WorkItem.n()
? ?at Amib.Threading.Internal.WorkItem.Execute()
? ?at Amib.Threading.SmartThreadPool.f(WorkItem A_0)
? ?at Amib.Threading.SmartThreadPool.r()
?
Error: splusmanagerapp.exe [App 2] # 2023-02-19 13:38:25? # ct __EventInfo__)
? ?at Amib.Threading.Internal.WorkItem.n()
? ?at Amib.Threading.Internal.WorkItem.Execute()
? ?at Amib.Threading.SmartThreadPool.f(WorkItem A_0)
? ?at Amib.Threading.SmartThreadPool.r() |
|
Re: TST-902 over wifi connection keeps disconnecting.
#tst902
I forgot to mention that the WAPs are currently configured to be in 'access point mode'
- our network switch connects to the 'in' port on the WAP Previously they were not set to 'access point mode' and they experienced the same problem.? Switching to 'access point mode' was a possible solution. |
fabiodaubermann
josh@LiquidPixel
to navigate to use esc to dismiss