Re: Quick video streaming question - TSW1060 - Hikvision
Only one stream on x60 panels, two on x70.
You'll have to use snapshots and update once per second or thereabouts. You can experiment with the updates. 1sec is a good place to start.
|
Quick video streaming question - TSW1060 - Hikvision
Hi guys,
Before I mess around with my system at home too much,? can anyone quickly tell me if its possible to have multiple video streams playing simultaneously on a TSW1060?? Id like to have 2-3 thumbnail previews of different cameras on screen at once.? Would be awesome if they were actually live views rather than snapshots.?
Very low res from the camera h264 substreams (hikvision).? Would be awesome to have the driveway, front gate and front door cams on screen in live view on my access control page.? ?
Cheers guys!?
|
Re: HTML5/CH5 WYSIWYG Editor for the Crestron control system
#html5
#ch5
Please provide more info on specifically how to export this to processor or how to communicate in general with the processor.
|
Am I correct in this thinking?
4 buffers one for each room Feedback, enable is driven by the value of the room/room selected digital signal that is selected. Then the input analog signal is the zone feedback from the amp, out of the buffer into say "Volume_Level" feeding the analog join of the slider/gauge.
?
Then repeat the steps for zone 2-4 and have the same "Volume_Level" out into the slider?
|
Analog Buffer. ? Greetings. I've decided to take a step back from control Crosspoint's until I can understand how to make a system dumb and work to understand how it all works. I have a C2N-AMP-4x100, I have 4 test rooms, 3 sources and one volume slider or gauge if I need to. Based on room value at the time of volume presses I then feed that analog signal into the room volume of the amp. Those symbols consist of a toggle, analog ramp, and an OR for unmute purposes. I have analog join 1 for the slider, and 4 analog output feedbacks out of the amp I would like to feed that one slider.?
Is there anything I missed to control volume, or to make it better?
Is there a good way to take Room1-4 volume level Feedbacks into one slider assuming there is only one room volume controlled from my TSR-310 at a time?
|
VTPro-e crash when starts
Guys, I am getting crazy. Suddenly VTPro-e decided to crash right after the loading bar completes at the start of the software. I tried : Uninstall all of crestron apps and re-install them from Master Installer. Unplug my HDMI monitors from PC. Change resolution. Change graphics card settings. Any ideas?
|
Greetings. I've decided to take a step back from control Crosspoint's until I can understand how to make a system dumb and work to understand how it all works. I have a C2N-AMP-4x100, I have 4 test rooms, 3 sources and one volume slider or gauge if I need to. Based on room value at the time of volume presses I then feed that analog signal into the room volume of the amp. Those symbols consist of a toggle, analog ramp, and an OR for unmute purposes. I have analog join 1 for the slider, and 4 analog output feedbacks out of the amp I would like to feed that one slider.?
Is there anything I missed to control volume, or to make it better?
Is there a good way to take Room1-4 volume level Feedbacks into one slider assuming there is only one room volume controlled from my TSR-310 at a time?
|
Agreed, RMC3 (with exception to ports and gateway)...
The MC3 was kind of an interim processor bridging between 2- and 3-series, i.e. the first chassis with the 3-series tech. It started its life as a transitional processor in the Prodigy line (PMC3), then was brought out as the MC3 for standard programming (though you could put SMW programs in the PMC3 after a couple years).
I would guess that the specs on both chassis are the same/similar but the MC3 has had a number of issues over recent years...
|
RMC 3, wish I had more than one!
|
RMC3. ? Have one running in my House. Runs without any need to reboot ?
|
Re: DGE100 browser and touchpanel wake
Hi Dave, ? that?s actually the approach i was starting with. ? Regardless of would I do, triggering the ¡°wake¡± signal of the DGE?s SleepWake Manager opens a new empty tab (or layer when in kiosk mode) instead of just waking up and showing the screen that was up before it went to sleep. ? This is driving me nuts¡ ? ? ? Embedded Browser object may not necessarily be the way to go about doing this for a DGE-100. Unless I'm missing some desired functionality, it sounds like simple buttons or other stimulus (IPT Online FB, Wake FB, etc.) to drive the full screen browser (via App Control Reserved Joins Device Extender signals) would be preferred.?
|
Hands down - Use the RMC3 as it is a fantastic processor. I own 2 of them and it runs my house.
Steer far away from the MC3 - it is junk.
toggle quoted message
Show quoted text
On Feb 24, 2023, at 9:30 PM, AVMaster <AVMaster619@...> wrote:
?Scraping the very bottom of the barrel, I have a system that is supposed to get a CP4¡which isn¡¯t supposed to arrive for another 5 months. ?My temporary options are an MC3 or a RMC3. ?All things aside, which of these is the superior processor from a number crunching standpoint? ?I¡¯ve used a hundred MC3¡¯s over the years but very few RMC3. ?The demands aren¡¯t going to be anything dramatic but I was curious what the performance difference tween these 2 units might be¡thoughts?
|
Scraping the very bottom of the barrel, I have a system that is supposed to get a CP4¡which isn¡¯t supposed to arrive for another 5 months. ?My temporary options are an MC3 or a RMC3. ?All things aside, which of these is the superior processor from a number crunching standpoint? ?I¡¯ve used a hundred MC3¡¯s over the years but very few RMC3. ?The demands aren¡¯t going to be anything dramatic but I was curious what the performance difference tween these 2 units might be¡thoughts?
|
Re: DGE100 browser and touchpanel wake
Embedded Browser object may not necessarily be the way to go about doing this for a DGE-100. Unless I'm missing some desired functionality, it sounds like simple buttons or other stimulus (IPT Online FB, Wake FB, etc.) to drive the full screen browser (via App Control Reserved Joins Device Extender signals) would be preferred.?
|
Re: Serial Number via Text Console
Useful information. Thanks Dave
|
Re: Serial Number via Text Console
No, it's the TSID (the hexadecimal unique identifier & SN equivalent) that's reported back in VER cmd.
Conversions are done in Toolbox, Powershell, etc. to convert the TSID to a SN in GUI Tools (System Information, etc.).
The conversion is conditional too, based on the detected TSID.
Older devices with strictly numeric SNs use a simple hex to decimal conversion.
Newer devices with alphanumeric SNs use a more complex conversion.
AV3>ver
AV3 Cntrl Eng [v1.8001.5061.27527 (Nov 10 2022), #009B156E] @E-00107f338ae5
?
|
Re: DGE100 browser and touchpanel wake
Hi John,
just tried what you described and it doesn?t work. Same issue...
After reboot, the desired webpage is displayed. After the DGE100 goes into sleep and is waken up again, it opens an additional empty page in the browser...
Cheers,
Thorsten
|
Re: Invoke iPad keyboard from Simpl
I sometimes use a long-press of a button to allow changing its text. Then a subpage pops up, which has the text entry box on it (high enough so it's out of the way of the keyboard), along with SAVE and CANCEL buttons. I have some notes from when I was testing all this - I'll see if I can dig them up...
Yep - here they are. There's a whole section on making TEXT ENTRY work. It's not specific to the iPad, but should work there too.
--
Josh Winn
The LiquidPixel Group
|
Serial Number via Text Console
Anyone know if there is a command to retrieve a serial number via the text console?
|
Do you mean GuiFX? ? Does anyone have a copy of the GuiLink Font?? I think there were 2 versions.? I'm working on an old system and don't have the font on my new comp.
Thanks! Toph
|
kpapadopoulos
AVMaster
Dave H - Crestron True Blue Tech Support Engineer Since 2014
josh@LiquidPixel