开云体育

@Lincoln Did you ever figure this scaling issue out? I've got a TS1070 project i can't see the foot of my project. Thoughts?

That was it. I am making a late New Years Resolution on learning Simpl+ and Simpl# this year. Mike

Many times after doing a firmware update, the certificates for https: sometimes change.? You have to refresh the webpage and then go through the typical stuff with your web browser warning you that

Hi, look like you forget the variable in the makestrings ... makestring(StringOut[getlastmodifiedarrayindex()],"Room Requesting Assistance: %s - %s - %s - %s - %s.", var1, var2, var3, var4, var5);

Can someone please take a look and let me know why this will not compile: #DEFAULT_NONVOLATILE #ENABLE_STACK_CHECKING #ENABLE_TRACE DIGITAL_INPUT Make_Message; STRING_INPUT StringAIn[30]; STRING_INPUT

Hmmm this may have been a bad idea. the crestron home app cannot connect anymore. if I go to 192.168.1.69 it shows the device first boot screen, but if I try to create a user on it the wheel just

I went ahead and started a firmware update. The firmware on there was 3.000.something so several years old and I read in the crestron docs it needs to be newer for the iPad app to fully work. Started

Thank you very much. I tried this, change admin password and for existing entering admin and serial number, but the system will not confirm. It doesn’t say anymore incorrect credentials, it simply

The default for CP4R is user: admin password: ?is The serial number of the CP4R

When you default the password the UI password is cleared.? You have to set it again to make the home app work.

Thank you. I have finally done this with mixed results…. the good news is I can now use the home setup app to configure buttons however I like. the bad news is the home app cannot login any more due

Hi Mike, You can use the fusion help request and response SSI (in Crestron Modules > Fusion) they have digital inputs and you can put the message text as a parameter on that module. Otherwise annSIO

Exactly, I am using a canbus to rs232 converter from ADFweb HD67290. But it is only a pass through converter. We need to send the hvac serial commands to control the ac. Thanks [email protected]>

Ok so you need and RS232 to Canbus and the commands for your HVAC system.

Hi, I want to control an hvac system brand Webasto and model bluecool ac. Basically i need to control ac on/off. increase and decrease set temperature and fan speed. [email protected]> wrote:

Hi, Yes, but depend on what you want to do ...

Hi, Did anyone successfully completed crestron with canbus system. How to send canbus commands through serial, i mean the command structure. I couldn't find any helpful file regarding this canbus

Off the top of my head. I wonder if you could use an SIO attached to the Fusion serial symbol. Drive SIO digital's with button options showing issues. Match your SIO serial strings with those button

This answer is correct and is what i misssed, The name I has in the subslot was different. Thanks for the input I got it working now

i just found it this week if you hit mute, then vol-, the volume goes to 100% it seems that HE doesn't restore the original vol before decrementing mute sets the vol to 0, vol- goes to -1 i wrote some