开云体育

I'm running into an issue where an end user has a user has a Macbook with a resolution of 2560x1440.? The XPanel he's trying to run is 1810x900, I made it this size so it can run comfortably on

... and good luck with the G7500. I have been less than impressed with them, though they are slightly better than they were a year and a half ago. Also note that if they don't see a camera via HDCI at

The 4.0.0 is what I am using via serial, but I've had to do some offboard processing as well to cover deficiencies in the module. [email protected]> wrote:

I guess I've been spoiled in only dealing with Cisco/WebEx hardware codecs for the past 5 or 6 years and kind of forgot Poly(com) existed. I'm building out the scope for a project that includes my

Hi, Sorry? to resurect an old thread. It seems I have a MC3 (ebay purchase) that has had a new image put on its SD card. Its working perfectly but the MAC address shown in Toolbox doesn't match the

Hello, Is there any possibility to manually change channel number on channel list? My provider channel list is outdated and my client cannot use favorites lists as well. I've tried to find any files

My latest article, "YoLink: Extending the Boundaries of Your Smart Home” is being published by the good folks at Residential Tech Today Magazine on their web site. At first glance, you might think

Oem is 4. You can use larger, unlike in MC3. I recommend high endurance one.

What memory size do these take?? 8Gb?

Try Faradite. We had used a lot of them and they work flawlessly. www.faradite.com ( http://www.faradite.com )

Depends on what you’re trying to accomplish and how large an area to cover, but I’ve made fair use of the Visonic Spy-series in my home (mostly the SPY-4 but that’s largely because I thought I

What would people recommend for occupancy sensors for residential other than the Crestron sensors?

Using # you can declare both local and destination ports, unlike?SimplWindows/Simpl+?that forces both to be the same. # allows your local to be?statically or dynamically assigned. Hmmm, someone

I've had that happen too, there is something going on with the SSH connection logic in the S#.?Module 4.0 just gives me status of 2d, can't figure out why without S# code. I'm using a workaround now,

Thanks for sharing!

Sure thing, this worked for me, and again thanks to everyone. Make sure to replace PANELADDRESS with your panel's IP or host name. USER and PASS are the user name and password needed to connect to the

Hi, As UDP ports below 1024 are blocked on VC-4-PC-3, has anyone found a workaround for this ? Some devices have a fixed UDP port to communicate, which makes it impossible to communicate from

Martin, Yes 5000. Yes, PUTTY at port 5000 using RAW protocol. the most perplexing thing it that the Crestron will establish and keep a connection. Just no data back and forth.

I will check it out, thanks.

They're used with the "Custom Controls" VtPro project, as described in Answer ID 1000880. There's also a good tutorial here <