开云体育

Crestron just released the VC-4-PC-3 and it ships immediately. I got one last week.

It's going to be an interesting Masters... Atlona has a control platform that is easy and affordable and available.? Extron is nice but have shipping delays as well.? QSC now integrates control, so

I did this for a countdown timer (like an egg timer), and it has a cancel button, so needed an easy stop. I did it with a function, and a delay. Integer_Function countdown(integer _countdown_seconds)

Could also 3D print/get custom made rear housing to support a standard pole thread, or otherwise fit for a pole mount.? Same answer, custom make the rear housing and use the ceiling version.

Could you put the notice in the room description? *Cory Sarzotti* *Synergy Media Group* [email protected]> wrote:

3D printer, and aircraft cable. Custom design and print a housing for the ceiling part of the sign, then suspend from aircraft cable. I haven't done it, but that's how I would do it. Could also get

I have heard different opinions on the practicality, but I prefer to actually have two panels, one Crestron, one MTR. The person holding the meeting can drive the call like they are used to, and an

Anyone ever take a SSC-102 type sign and extend it further into a space from a ceiling that is too high on a pole or similar? How did you go about doing so? I think the space we are in will have a

Thanks Andy for your answer, it is crystal clear for me now. Regards.

Never really been an issue, so never thought about it.? Have a half moon window with 5 shades in pockets.? The pockets are stair cased. _____ _____? ? ? ? ?_____ _____? ? ? ? ? ? ? ? ?

It won't have any integration with the unit, but you can definitely have it in a Crestron control system but you would need another panel / UI to run the teams interface. The Crestron Flex systems

If you don't get the crosspoint file generated in the program output directory, you can turn that setting on in Simpl Windows by going to Options->Preferences->Compiler Settings and checking "Generate

Microsoft Teams Room. The -T Flex models for Crestron’s specific units.

What's an MTR?

Crestron made a breaking change with the 5.1 update. The PIN field is now a string instead of an integer. They updated the 5.1 simpl module parameters to reflect this as well as the Simpl# library,

Is it possible to use a Crestron control system with a non Crestron MTR? Like Logi Tap or the like?

Also there are some modules that use crosspoints internally. Might be worth checking. When compiling your should automatically get a file with all informations about crosspoints in the program.

While I haven't confirm this will work for volume volume ramps, you might try using the SIMPL+ CreateRamp function.? It's mainly used to ramp lighting load.? CreateRamp uses Ramp Control Blocks

Use a function instead of a for loop. Create a function with a wait inside it. After the wait, call your function again. Use necessary logic before your wait.

I can’t speak to it yet, but I’m planning on testing a UC-CX100-T with a QSC Q-Sys Core Nano in the coming weeks. QSC rep indicated it should be possible but we didn’t get in to it too much as