开云体育

Do you want to change the provider mode or just go in and out of device mode for BYOD with the Poly camera/mic/etc...? Changing providers always reboots because it is changing the underlying setup for

It is only Ubiquiti's Unifi line that cannot handle multicast traffic. I have several NVX installations using Ubiquiti's Edge line with no issues.? I would imagine that NAX traffic would not be quite

A lot more switch configuration need to be done for multicast streaming to occur. Ubiquity switches cannot handle this type of traffic properly. Check the crestron help file on proper switch?

Hi Daniel, If it is a codec room kit, I am testing with Cisco room devices 4.0 and with the 2.3.9 module, some things work in one and others in the other

I believe there is. Which module are you using to control the webex device? (guessing it's a codec). If you are using the Cisco Room Devices 4.0, I believe that device has "message center" or "alert

Is there a way to change the HDCP support of DM chassis input cards via Text Console? I know DMHDCPdisplay shows the current HDCP info per card, but is there a way to use text console to turn support

Hello Daniel, I mean that when you start a webex meeting through the cisco panel, some pop ups appear asking if you are a host or guest to continue. I am reviewing the api guide to see if I find

What do you mean by "reflect"? Do you want the popups to show up on a panel? I am also curious, but I am hoping to close out the prompts. Hope we both can get some info.

BR 5812 = SIMPL - CCD Display Module - v1.14-1.19 allocating NVRAM and unable to compile when using multiple instances BR 5812 solved noting SIMPL+ calls storing data have been removed from v2.x

Sorry for the off topic post.? ?Let me know if you have one you're not using. Thanks Karl

Hello everyone, Does anyone know if there is a way to reflect the pop ups that appear when you make a call through a webex room kit in a Crestron panel? Thanks in advance

I think that's a valid point, there's no reason to pull up calc.? In the case of the apple remote, with the later IOS, that's just a swipe down from the upper right corner.

Unfortunately it is not possible. Poly G7500 always reboots when provider mode changes.

Talk to coolautomation support, they can update the unit's firmware remotely to the latest v, which if i remember correctly, is not available for us to download.

R is for Residential

Yeah have also done this for a client that wanted an analogue clock. Activity detection and touch detection through a pulse stretcher or'd together did the trick.

sent you my email address

To answer the original posters question -- No you cannot run SIMPL on a CP3-R. The CP3-R was a pretty short lived processor.? It was available for just a short period. Being introduced in 2019 and

"...It's only a movie...only a movie...only a movie..."

But I use non -R for residential I dont need no stinking CH bs haha. Theyre trying to brainwash us lol