开云体育

I just checked, it will handle 4ohm loads

You can ganged (wire parallel) the speakers depending on the ohm rating of the speakers.? ?If you have 8 ohm speakers and if the AAE can handle a 4 ohm load it will work.

Sorry but does ganging the pairs mean putting both pairs of speaker wires in the same terminal in the AAE? So essentially having two wires (from different speakers) in the plus and two wires in the

Splitter to me in this case is so over-thinking, can gang the pairs together and be fine...... If you NEEDED to could mode the code in such a way that the vars from 1 zone feed the the other... aka

I'm hoping somebody can help me out with what the best thing to do here is. I self support my old legacy Crestron system. We are redoing my backyard and adding a big patio. I currently have two yard

Am I missing a more recent message in the thread? The last one before this one I see was from last year…So I may be missing context but… A time formatted analog take care of all of this for you

In regards to multiple processors : I’ve used this to in a few places. ?Example there is a building wide lighting system and rather than have eisc’s to interconnect the lighting with the AV, I

You are AWESOME!!! thank you so much!? Worked like a charm.

This has been disabled by default on latest Crestron Home firmware, from the release notes: By default, on upgrading, the port used by pyng Smart Objects, CEN-TRACK, TSW-x52, and Triggers and Listen

Ok, got a quick question (I hope).? I have a client where we are converting their system to a Crestron Home system.? To deal with the limitations of the Crestron Home box, we are using an old MC3 to

In case you are talking to multiple processors... I've never used it that way.

I'm not sure what you're asking specifically, although it would be rather straightforward to use some comparison logic as an extension to the above to achieve this. -- Crestron Service Provider - TBD

Hi folks, I wonder how I did open debug window in Crestron Home configuration Xpanel. Are there any hidden shortcuts to operate with? I have opened it last time but cannot with the way how to do it

I current do exactly what you are describing to check when an EISC is offline.? Been doing that for many, many years and never once have I seen where the oscillator stop working.? I think you will

I have a slight off topic but somewhat related question for you all: Why does a wired TP has option for multiple IPID masters? In what cases would you use that?

I have noticed that the Ethernet Offline Manager is Super laggy, meaning it may take up to a minute for it to report that the EISC is actually Offline. What I've done is added an Oscillator in the

BruteForceIsUnderRated, I found your previous post with fput command description. It worked for me. Thank you!

AMEN!!

what about when you want to have HH:MM:SS? you need to zero the seconds once you hit 60 sec, and start incrementing the minutes, etc.

If their CH5 components are any indication...I would MUCH rather just have an API/protocol documentation to CRPC than a CH5-MediaPlayer component that would be a nightmare to "skin"