Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
|
Re: CH5 web panel release
I have downloaded the demo code and everything looks fairly straight forward.? I have loaded the program to the processor and can verify that port 49200 is open.? I set my processors IP in the WebPanel.js file.??I have tried just launching the index.html file in my browser and also have tried "open with live server," neither seem to do anything.? What step am I missing???
|
|
Hi? i am having an issue with the dali driver of led strip,
It shows failure when addressed on the dali commissioning tool but i can control the intensity of the light . But when i add it to a group for my crestron home app, the? Slider keeps on changing percentage, the light intensity doesnt change physically but when i try to use the all off command , most of the time it does not shut the strip light because the intensity keeps on changing by itself. What should i do! |
|
Re: Baimp Nexia
¿ªÔÆÌåÓýA router can have only one input selected per output so you don¡¯t have to worry about ¡®cleaning up¡¯ active if you¡¯re using a router; a mixer can have multiple inputs so depending on the size of the mixer if you want to enforce an interlock it may be better to store that output in a series of limited presets to ensure you can¡¯t get into a state where multiple inputs are inadvertently active at the same time. ? In theory the Crestron modules using the mute will work (as another poster mentioned) but they are very temperamental on the 3 and 4 series so in the couple systems I still have Audias floating around (they¡¯re duct-tape-and-bandaid systems until the client moves into a new building later this year) I just have the RTRMUTEXP commands in an SIO ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D ? From: [email protected] [mailto:[email protected]]
On Behalf Of John Gabler
Sent: Monday, February 14, 2022 9:51 PM To: [email protected] Subject: [crestron] Baimp Nexia ? [Edited Message Follows] Is there a Router/Mixer module for the Nexia? Or will a preset leave an input active if another preset calls a different input for the same output? |
|
Re: Baimp Nexia
I think you can use the "Biamp AudiaFlex+Nexia On-Off Control" module and select the 'Mute device type' as 'Router Crosspoint Mute'.? This would allow you to control the on/off state of each crosspoint.? The Router object only allows one input to be selected to an output at any time- like an interlock.
|
|
File /Device Ping 3-4 Series_archive.zip uploaded
#file-notice
[email protected] Notification
The following files have been uploaded to the Files area of the [email protected] group. By: rdrygas <rdrygas@...> Description: |