开云体育

Tray, I didn't write the Crestron module but we did write drivers for other platforms and they way you are sending the strings pretty closely matches our drivers. We are definitely sending the quotes

Does anyone have a list of console commands for this device? All I really need is the command to switch between HDMI input 1 and input 2 as the transmit source, but any commands available would be

I have found out that it is possible to power the CSM-QMTDC-163-1-EX motor with a battery pack.? This is not supported by Crestron but it can be done.? The motor draws approximately one watt in

I am here having an issue with the HttpsClient. The request runs into an "unknown error" whenever I try to add Content-Length to the header. It runs fine otherwise. About the sample code below: you

Hi Shawn Yes do have the protocall commands in PDF. I was hoping someone had a module built up allready. Did not find what I was looking for on the crestron market place except the basic commands like

Same here.? Been solid for my work.

Have you used MDC before? If not I can get you started as I have all of the basic commands like On/Off, source selection, Volume up down, Brightness up down, mute. Do you have the MDC protocol PDF

Is there any way to stop these stupid messages appearing in the logs from Sonos. Debug is off. Really Crestron - just give us error msgs if something is broken. Do I really need my processor SD card

I also use Mathew Klucznyk's modules. They are amazing.

Not crestron directly, but it's controlled by Crestron. I've got an CK iPlayer 3 by Phillips that the SD card has died and is unrecovreable. Does anyone have one of these they can grab the file

Hi Brad, The point that's being made is... signals is SIMPL **CANNOT** hold a value beyond the range 0 (all 16 bits off) to 65535 (all 16 bits on).? The value isn't being "converted", it's being

I found the issue and it is confirmed with Crestron. You must initialize the panel first before sending the VTZ because the zip gets stuck in the panels bios from the first load the panel gets.

I no longer use the Crestron version but using Mathew Klucznyk version. He created these modules due to the issue of disconnecting from Core. We have been stable for the last 2 months, whereas using

I'm not needing a larger number but 0-65534 but any value outside of that range is entered I am not getting an error but a conversion that still saves that value. #DEFINE_CONSTANT maxLevels 65534

I did go round and round with Tech support but in the end they weren't much help BUT what I did discover was this: I created a test project and just loaded that with all defaults (left crestron as

There's an example on the help file for the FusionRoom class: https://help.crestron.com/SimplSharp/html/T_Crestron_SimplSharpPro_Fusion_FusionRoom.htm wrote:

WOW!? Thanks JohnMax!! All these years and I never knew about that Jumper!!? (Maybe I should RTFM!!? HaHa!)

Hi All, Just wasted a bit of time on this, so I thought I'd share for others'... Unlike the other major Apps like Netflix and Amazon Prime, The AMC app on the Apple TV will not return to the MAIN menu

Does anyone have or know of an example code, showing how to program a room into Fusion via C#?

Yea you will be good with that as long as you remove that jumper.