开云体育

Ebay has one for $275.

Agree with Lincoln.? Don't think we will ever see a Crestron schematic out in the wild. I believe the AMS is of the series-2 generation.? ?Do they know if the first stage power is ok?? The ASTEC

Like most consumer electronics manufacturers, Crestron doesn’t release/publish schematics (especially not anything with component-level details like you’d need for repair) – the best you’ll

Thank you so much for the info.? I had actually already concluded that and have the project about half done.? Quick question though, in D3Pro, you can set the Fade Time for each circuit, is this

Thanks Steve, I appreciate the confirmation of Command Line and Flash interface. -Mark

Ah, that is probably the issue.? Had a PAC2 there fail, replaced with MC3 temporarily. What a dummy. Thank you.

I wanted to clarify, because that's not correct. The delineation in that article is regarding the deprecation / removal of the Flash "/setup" WebUI. Essentially saying if you've upgraded to v1.601+

A customer's Crestron AMS equipment had problems. A trusted electronics technician who specializes in the receiver has diagnosed a problem with the voltage regulator. However I need the electronic

Also check your Lock Rotation setting in the Go App setup

We have done quite a few of these projects. We always use the configuration portal to manually import everything from D3, it’s a bit time consuming but not horrible. We did a 200+ load lighting

Do you run the latest iOS & App Version ? If i remember correctly it was a bug in iOS or the Crestron App, it should run with the latest Versions if the correct app is used.

10$ that the iPhone app is installed instead of the iPad one.

And don't forget that if a previous control system was registered on that MyCrestron DNS address you first need to delete the old MAC address from the portal, otherwise another unit can't register.

Hi Guys Im trying to control some Somfy 485 curtains using the? SDN 2.0 Module from the Application Market using a CP4 Firstly the pinout from on the Help Doc? saying? RJ45 Pin 7 & 8 Orange goes to

Well you are in luck.? The flash got corrupted on my MC3 back a few weeks ago and had to do an initialize/restore to get it to work again.? That blew out the MyCrestron settings in it. So I created

Not possible. You will need to build it in CH and be ready as everything is re-assigned new ID’s whether it be CresNet or InfiniNet EX. Pat M From: "[email protected]" <[email protected]> on

Yes, Steve, I'm curious if you can set your MC3 MYCRESTRON via text console. Of course, I have one laptop with latest everything, and Flash not supported, so am unable to use the MC3's interface.

You know, I think you still have to use the flash player interface on the MC3 to set MyCrestron.? If you look at https://support.crestron.com/app/answers/detail/a_id/5779/kw/mycrestron It looks like

Yes, I can ping www.google.com ( http://www.google.com ) just fine, as well as the local router and our company website. So deflating...again. Any plans for Crestron to have some type of service like

Also make sure the default router and subnet mask is set correctly. The easiest way to see if the MC3 can get out to the internet is to open a console window and execute something like ping