开云体育

Thanks Steve. I just checked my CP4 and when I type in the console command the response is: Logoff Idle Time (minutes): infinite Jay

Has anyone else had issues with the LAN port on Samsung QM displays going to sleep?? I have two QM75R displays controlled over LAN as Crestron Connected Devices.? I had no trouble controlling them

Thanks

Do not wait for it! The Samsung MDC protocoll works fine. Tcp/IP client port: 1515d Samsung Flip ID: 01 (set in samsung menu) power on: \xAA\x11\x01\x01\x01\x14 power off: \xAA\x11\x01\x01\x00\x13 in

SIMPL team is actively working to resolve the 404 error since Microsoft removed .NET CF 3.5 msi from their servers. It can currently be downloaded from Crestron from this OLH article: *

I've never encountered a truly "faulty" logic symbol in 8+ years of providing support. When it isn't a programming mistake, the symptom is most often attributed to mismatched signal file version

Ideally, yes, the on-site technician knows to use those settings in Toolbox's program loading dialog ( https://help.crestron.com/toolbox/#System_Info/Functions/SIMPL_Program.htm ) if needed (I almost

Dave I thought the checkbox in Toolbox transfer window "Bypass auto stop/start of dependent programs" handles this automatically?

We have had more than half of these fail over the years.? I would avoid using this product, it will burn you later.

As others have stated, crestron logic symbols simply work. Check all driving logic! It's easy to get caught out if you are using the or to sum a bunch of pulsed signals and just one signal gets

+1 for Lindsay. Many many ORs all working as expected for me – from the CNMS(X) [though TBH it’s been a long time for those] through the 4-series (this morning) and never seen one not doing what

?However, I’ve seen some disconnects much faster than 20 minutes “ Yep, same here. Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von jbasen Gesendet: Donnerstag, 12.

Hi Jay, I make use of interface devices from Intensis which offer device specific modules and allow AC control over Wifi. For the larger projects with VRF systems, I opt for CoolMaster K

What is the fault? It is more likely the logic that is feeding the OR. Is one signal Hi when you expect to see a Hi from a different signal? The logic engine is the most robust piece of Crestron's

So tired of faulty "Or" symbols having to replace with buffers!!

The console command you are looking for is: SETLogoffidletime 0 Haven't tried it with SIMPL debugger yet.? However, a few days ago, I was ssh into a CP4 all day (no Crestron software involve) and had

I just noticed that the header for this topic mentions 4-Series, so this might not apply exactly. I had this “debugger time out” concern when working with my CP3 on my test bench. TB pointed me to

Thanks. Good to know. However, I’ve seen some disconnects much faster than 20 minutes Jay

There is an automatic disconnect after 20 minutes.? I saw a console command to adjust the time out but I can’t remember it right now.? I think setting it to 0 would make it never disco. I

I haven’t personally noticed it being slower but I have run into problems with the debugger losing its connection with the control system Jay