开云体育

You need to use S# to do HTTPS, SIMPL nor SIMPL+ support HTTPS. From: <[email protected]> on behalf of <itaibengal@...> Reply-To: <[email protected]> Date: Tuesday, January 12, 2021 at 5:31 PM

A fan that small, lower noise almost certainly means lower air flow.

"No Program Loaded" (return from PROGCOMMENTS:# cmd) just indicates the program is not running. In most instances the program successfully uploaded, started, and then experienced a runtime error that

I am trying to control via HTTPS a light strip. I have the commands working properly in Postman but not sending an SIO to the URL. I was hoping to use the module, but I did not see any documentation

Are you using Dropbox? Have had simular issues when I forget to pause Dropbox sync before I start to work on Crestron programs

AV Programmer, I have given up on that 16x16 unit and as a stop gap, ?I have gone back to my old 8x8 and its been solid since Christmas Day. I did some testing on the 16x16 and had it on the floor

In case anyone was interested, I have opened the PSU and there s a PC looking low profile power supply I noted middle with a loud 40mmx20mm 12v 2pin fan. I have ordered a Noctua silent fan and will

Not sure what toolbox but I’ll have a look. I tried usb, tcp connection and ftp via FileZilla. I can connect to it no problem and it’s missing the lpz file and sig file in the app1 folder. I’ve

I doubt there’s an SD in it but I’ll have a look, thanks for the heads up

The only time I've seen something like that, I had a SD card in the processor with a program on it.? When I loaded, it was loading to internal memory, but the program on the SD card would keep

Have you tried loading via ftp? What version of Toolbox are you running?

Hello guys, I hope you're keeping safe during these tough times. So I'm thinking about the possibilty of relocating to the EU. What's Crestron's presence over there? is it widely used? or does it

Hi, just wondering has anyone ever had any issues uploading a program to a CP3 before? When I upload the program it goes through its normal process and gets to the send again window. Which says to me

Not much you can do to keep good flow and low noise in a 1U unit. Unless there is a room inside to install 80+mm slim profile on the top lid...

I have been having techs install Crestron Home Setup and that has been fixing the issue as well.

Bump Anyone hear anything new yet?

I just got a DM-PSU-8-PLUS and it cycles some very Louis fans every few minutes. I only have two Poe connections at the moment and it runs quiet than really loud then back to quiet. I am not worried

Sounds like it's expecting tenths of degrees and you need a ascale somewhere in your programming

You need to experiment with the flashers.? Some devices can be blinded by the output level of the flasher.? I would hold the flasher a few inches away from the front of the PVR and repeatedly hit

Many thanks to Peter Jablonicky for posting the "Sonos Line-in control" modules in the File section.? I would have never guess it would be possible to control a Sonos via SIMPL or SIMPL+.? Found it