开云体育

Hi guys, Don't have much experience with REST API's hoping I can just get a bit of info. Here is an example command from the API. I know I will be told to get this done through simpl# however I have

This camera is a re-branded Minray camera (Chinese). I use the exact same camera branded by another company. I have used hundreds of these. I always Control them with the Vaddio Roboshot module. I use

Hi, I uploaded a Samsung TV IP control using CCD (Crestron certified drivers) example program, hope it helps. /g/crestron/files/Programs/samsung%20ccd.zip You have to manually load

We had no luck getting QE Series to work through RS232. We also didnt find any documentation that indicated that RS232 works on these models. Hopefully someone here says otherwise.

Does anyone have information on? the serial protocol for this device. I'm unable to find anything. i'm tring a bunch of crestron modules and no luck yet.

If you figure that out, I'd love to know.

What?? How am I going to make a living with that!!???

The API is well documented. Just use an SIO. It worked very easily for me OP

You are correct on all counts, I do believe you need IP reservations in the router for each player as they are only DHCP. I've done 4 of these systems and all but one works very well. The one that

Thanks.? I emailed IC Realtime and got the newer module 4.0 and it is working.? Still digging into the text console issue I though I found yesterday with another module in my program.

We wrote the module. It’s not the symbol, it’s something else we were doing in the module for 2 series, and we’ve set IC Realtime an updated version. Since we wrote it, you can either reach out

Anyone notice the text console symbol no longer works in 4 series programs?? I'm getting the following error when my IC Realtime IP module tries to query the mac address for activation.? And of

This was updated today: https://support.crestron.com/app/answers/detail/a_id/1000806

Yes, port 50002 for registration, port 50001 for control and UDP for wake on lan to power on. On Thu, Nov 19, 2020 at 9:32 AM, j5races<fueler1@...> wrote: Thank you! This player is a different

Hey Gary, just been looking into this, do you know if this module is compatible with the sonoff R3 without flashing tasmota? The newer variants you just need to pop a jumper on and they support http,

Should work with a Sony Module

Our university is looking to install the cameras. Wondering if anyone has any control modules/ or RS-232 commands for this product. Thanks!

Just tried the 1 HW 5 SW method, reload FW.? No dice. SSHPort shows "SSH Disabled, Port 22". Seems like I need to enable SSH, but don't see a way to. Sys Info shows SSH Enabled, but text console says

Thank you! This player is a different port than the 1000 correct?

Thanks Gary!? Good to 'See' you!!... Can you confirm the following?... At a minimum, It looks like I can set things up with just the MPO, with each player's CRPC signals routed thru the MPO router v4