On Jun 9, 2020, at 7:58 PM, Maxim Batourine via groups.io <m.batourine@...> wrote:

?From my experience with Christie, most of their device protocols have brackets around commands, I.e. (PWR 0) or (PWR 1) or (PWR?)

Sent from iPhone

On Jun 9, 2020, at 7:55 PM, EJ <waxpilot@...> wrote:

?Anyone have the proper control protocol for a Christie Digital SUHD 861-L display? I’ve downloaded the manual, but that protocol did not work. I’ve tried several other commands to no avail. I get hex characters back (usually \xFF or \x E3) so I am getting communication to it, but does not follow the commands.

Manual says WAKE and STANDBY for use as power controls, other protocol guides use PWR 0 and PWR 1 for power...neither work. I even tried some obscure commands from other Christie devices...nothing.

Any help would be appreciated, I’ve downloaded every manual I can find and I am about to call their technical support, but I can’t do that from the room I’m working in...

Figured I’d try here, see if the hive mind had any ideas...

Thanks,

EJ

On Jun 9, 2020, at 7:55 PM, EJ <waxpilot@...> wrote:

?Anyone have the proper control protocol for a Christie Digital SUHD 861-L display? I’ve downloaded the manual, but that protocol did not work. I’ve tried several other commands to no avail. I get hex characters back (usually \xFF or \x E3) so I am getting communication to it, but does not follow the commands.

Manual says WAKE and STANDBY for use as power controls, other protocol guides use PWR 0 and PWR 1 for power...neither work. I even tried some obscure commands from other Christie devices...nothing.

Any help would be appreciated, I’ve downloaded every manual I can find and I am about to call their technical support, but I can’t do that from the room I’m working in...

Figured I’d try here, see if the hive mind had any ideas...

Thanks,

EJ

?

If you visit Sonos, they have a list of partners at:


Unfortunately, Crestron is not on the list. The same can be said for Control 4 and Savant. But companies like URC, Integra, Onkyo, and Elan are!? What gives?

If you've been working with Crestron for more than a few years then you really should know that issues like this are to be expected.? I (and many others) warned a lot of people in this group, Labs, Reddit, and Facebook groups that the Crestron/Sonos "partnership" was barely a partnership at all and to expect issues with the integration.? When was the last time you saw any sort of Crestron "partnership" work out?? Pandora?? Nope, that lasted until they decided to bail on the CEN-TRACK-AUDIONET.? Amazon?? Nope...they got the Alexa integration barely working and then just stopped updating it and never bothered to add more features to it (like AV control).? Apple?? Nope...barely works and they've been promising more functionality for how many years now?? Google? Did they ever get Google Home to work properly with voice?? It was severely broken last time I checked.? Logitech?? Is using their USB web cams a real partnership that helps us in any way?? I can go on and on but I think you get my point.?

?

--- Monday, June 8, 2020 at 12:03 AM, Marcelo D wrote:

Ultamation, the only way to go. But there are only a few models and firmware
that works. Good luck, I waisted a lot of time amd money to get this to work.
Ultamation guys were the only ones that were able to help me but you still have
to do some programming to get it the way you want. I wish there was another NVR
that its manufacturer provides a Crestron module to control it via IP. It must
be I just don't know any

--- On Sun, Jun 7, 2020 at 2:08 PM, Micky Kummer wrote:

Hi Brandon
Can you please upload the module for Hikvision
Thanks

?

This is something that just started happening on my desktop.? Everything is fine on my laptop.? Both machines are running the latest updates, except for Simpl Windows.? Both are running 4.11.06.1

File: E:\Testing\CrestronCertifiedDriversAVReceiverModule_1_3.csp, Line 12
SDK assembly Newtonsoft.Json.Compact.dll, Version=3.5.0.0 cannot be resolved in inlude4.dat version 2.12.54? Ensur that all assemblies are dependent on the same S# SDK verision.

Compile errors exist for Simpl+, could not perform SIMPL+ link for E:\Testing\CrestronCertifiedDriversAVReceiverModule_1_3.csp

?

One more question: if I create a Phone button, am I able to point it to open the Zoom App to the Phone menu/section directly?

The TSW works together with the UC Engine.?

On Tue, Jun 9, 2020 at 5:02 PM Brandon Williams <bwillceo@...> wrote:

You will need the UC engine.?

On Tue, Jun 9, 2020 at 5:00 PM Vincen PUJOL via <vincegre=[email protected]> wrote:

Hi

Do someone here have already integrated Microsoft Teams in a conferencing system ? Explanations I found at Crestron website suggests that I would need the UC-ENGINE to do that (one of few products on website that have no price listed..) but panel TSW-1060 is listed as including the Teams application too so is panel enough to use Teams with the Crestron system or still need the UC-ENGINE ?

Thanks for clarifications/explanations ;)

痴颈苍肠è苍

If you've been working with Crestron for more than a few years then you really should know that issues like this are to be expected.? I (and many others) warned a lot of people in this group, Labs, Reddit, and Facebook groups that the Crestron/Sonos "partnership" was barely a partnership at all and to expect issues with the integration.? When was the last time you saw any sort of Crestron "partnership" work out?? Pandora?? Nope, that lasted until they decided to bail on the CEN-TRACK-AUDIONET.? Amazon?? Nope...they got the Alexa integration barely working and then just stopped updating it and never bothered to add more features to it (like AV control).? Apple?? Nope...barely works and they've been promising more functionality for how many years now?? Google? Did they ever get Google Home to work properly with voice?? It was severely broken last time I checked.? Logitech?? Is using their USB web cams a real partnership that helps us in any way?? I can go on and on but I think you get my point.?

?

I didn't click on every one, you are right, it looks like most of the X models have rs232.? Are you using one of the Crestron drivers for control or something custom?