Re: Hikvision IP Camera control
Ultamation, the only way to go. But there are only a few models and firmware that works. Good luck, I waisted a lot of time amd money to get this to work. Ultamation guys were the only ones that were able to help me but you still have to do some programming to get it the way you want. I wish there was another NVR that its manufacturer provides a Crestron module to control it via IP. It must be I just don't know any
On Sun, Jun 7, 2020 at 2:08 PM, Micky Kummer <mickyk1971@...> wrote: Hi Brandon
Can you please upload the module for Hikvision
Thanks
|
Re: Autonomic MMS-5A and flash
How did you manage to clone the drive and is their any reason why it not possible to put a bigger (2tb) drive in.
Thinking of doing the same on an only unit?
toggle quoted message
Show quoted text
On 6 Jun 2020, at 05:05, "junkmail@..." <junkmail@...> wrote:
?I wouldn't count on any updates from Snap. My MMS-2A went belly up and when I called them they said the device was now obsolete and they wouldn't do any sort of repair work on it.
I know it's getting old but 2 grand and they won't help? All righty then. It actually worked out for the best though. With nothing to lose I pulled the drive and actually managed to restore it with registry backup files on the drive itself. So I cloned it then
put in a new 1T SSD and now have a nicer unit with no need for a NAS or USB drive to have enough storage.? While I was at it I doubled the RAM in it from 2g to 4g with some old laptop memory sticks I had laying around and now it seems a bit quicker to index.
And FWIW, even though the iPad app is kinda crappy that should still work. Also, the iPad app for the McIntosh MS500 streamer will work since that's just a Mirage with some fancier internals.?
I don't know how their Windows app works but it seems like it should keep going since there's no browser involved. The setup pages are just straight HTML so they should just keep working no matter what.
I liked Autonomics more before Snap snapped 'em up...
|
Re: TSW-760/1060 and Zoom Room Application
Thank you so much soundscan!
|
Re: TSW-760/1060 and Zoom Room Application
You can use the App Control and?Zoom Room App Reserved Joins device extenders for the TSW in SIMPL to accomplish this.
|
TSW-760/1060 and Zoom Room Application
Hi friends, I¡¯m sorry for the basic question but I¡¯ve been looking through videos and Docs for this answer.
If I get an either TSW760 or 1060, and activate the the Zoom Room Application and Page flip.?
I want the zoom room application to activate when I press a Custom button in the touchpanel.
What is the ID that I would need to activate for it to appear?
|
Re: Hikvision IP Camera control
Hi Brandon
Can you please upload the module for Hikvision
Thanks
|
Re: Crestron Home and SIMPL
Unless things have changed, you cannot run SIMPL on a CP4-R.
On 6/7/20 9:50 AM, Michael Braithwaite
via groups.io wrote:
toggle quoted message
Show quoted text
Sorry for a bad question here;
Is it possible to run Crestron Home and a SIMPL project from the
same CP4-R?? or once you have OS3 running, no other projects can
be loaded onto the processor?
|
Sorry for a bad question here;
Is it possible to run Crestron Home and a SIMPL project from the same CP4-R?? or once you have OS3 running, no other projects can be loaded onto the processor?
|
josh.ai and Crestron Home OS3
I have looked at Josh.ai fairly extensively at Cedia the last two years.? ?I am curious if anyone has used Josh.ai with Crestron Home OS3 and if so what has been your experience.
Thank you
Bryan
|
Re: Sony TV IP Module with Smart Controls
how much does it cost? each license?. Thanks
|
Re: Send Balanced Mono to Balanced Stereo Input on DMPS
Here are some audio wiring tricks to use.
For balanced inputs do on leave the + or - connections open. Always connect to Gnd.
For Active balanced outputs never connect the + or - to Gnd. If the output is a transformer or Cross-Coupled, then connect these outputs to GND. These days most all outputs are Active. At Rane we use to do Cross-Coupled outputs and it was listed in the manual.
Balanced mono to balanced stereo. Usually you can just run two balanced audio cables in parallel from the stereo input and connect both to the Balanced mono.
+ -------------------- L+ & R+
- --------------------- L- & R-
Gnd ---------------- L & R Gnd
Balanced stereo to unbalanced stereo
L+ ---------------- L
L- N/C
Gnd -------------- Gnd & L-
R+ ---------------- R
R- N/C
Gnd -------------- Gnd & R-
Unbalanced stereo to balanced stereo
L -------------------- L+
Gnd ---------------- Gnd & L-
R --------------------- R+
Gnd ---------------- Gnd & R-
Unbalanced stereo to balanced Mono.
This is the one that almost always gets connected wrong causing the audio to sound like karaoke. This happens when you connect L to - and R to +.
If the output is RCAs, you can usually connect the L&R outputs together. As long as the output impedance is >= 600 ohms. A lot of times you just don¡¯t know and for these you should use the RDL TX-J2. If you have some 620 to 1K ohm resistors, you can do this.
L -------[620]--------- R+
Gnd ---------------- Gnd & R-
R -------[620]--------- R+
Balanced Stereo to Balanced Mono
Here is a cool trick to use without having to add an RDL bridge while maintaining the CMRR of the input.
L- ---------------- -
L+ N/C
Gnd -------------- Gnd
R+ ---------------- +
R- N/C
Gnd -------------- Gnd
Mike Slattery
|
Re: RS232 protocol for Sony UBP-X1000
That model only responds to IR, not even RS232. The receiver window is behind the eject button.
Ryan Cunningham
toggle quoted message
Show quoted text
On Jun 6, 2020, at 7:16 AM, j5races <fueler1@...> wrote:
?Is there any info about IP control of X800M2? I can¡¯t find the port to control that model
|
Re: RS232 protocol for Sony UBP-X1000
Is there any info about IP control of X800M2? I can¡¯t find the port to control that model
|
Re: Autonomic MMS-5A and flash
I heard Snap no longer owns Mirage. As of like 1-2 weeks ago I believe the old owner bought them back from SnapAV
|
Re: Send Balanced Mono to Balanced Stereo Input on DMPS
The AUDIO inputs can receive an unbalanced or balanced signal. They corespondent to the same inputs as the HDMI / VGA sources.?
The LINE/MIC inputs are fed through the mixer whereas the AUDIO input is a source.? Ryan Cunningham?
toggle quoted message
Show quoted text
On Jun 5, 2020, at 9:26 PM, TJP <Ssute01@...> wrote:
?Hey guys?
As the title suggests, I¡¯m wondering if it¡¯s possible to send a balanced mono audio source to the balanced stereo inputs on a DMPS3-300-C?
I know the DMPS has balanced inputs which it shares with the mics however I¡¯d prefer not to use these if possible as I would like to use these for mics alone?
Any advice appreciated?
Thanks?
|
Re: Apple TV Audio issues
Chris,
Have you tried rebooting just the Disney+ App? I¡¯ve had similar issues and rebooting the app solves it too.? -Kevin Keenan
toggle quoted message
Show quoted text
On Jun 5, 2020, at 3:48 PM, ckangis <chris@...> wrote:
?Hi All,
Thought I would share recent experience with AppleTV audio issues to see if anyone might have an idea for solution (He asks expecting the answer no!...:) )
My daughter and I have be going thru all the Marvel movies, chronologically, with Disney+ on the AppleTV - I can't believe how many movies there are!!!
***? Every so often we'll start a title and will get all the music/effects audio but No Dialog channel. Some titles are fine, others have this issue. ***
Our setup:
Apple TV 4K (Set to 1080p)?
Fed to:? Digital Media DMC-HD-DSP - EDID 'Consumer 1080p60 3D HBR' - This provides for up to 8-channel discrete audio formats, but should not allow ATMOS formats
DMC-CO-HD Fed to:? ?RMC/Samsung TV? and HDMI output to a Crestron XSP surround processor?
I have ruled out the XSP as the root. It seems to be something in the AppleTV or the DM Input card (DMC-HD-DSP), since when the problem occurs, the only solution to *fix* it is to send the DMRESETSLOT command to the input card (input 3).
This resolved the solution immediately, every time.?
I have seen these kinds of granular audio issues (issues with a specific title) with AppleTV over the last few months and am looking to come up with a solution or some 'self-healing' code solution.?
I certainly can fix this easily for myself on my own system, but when it happens to a client, they won't know what to do, except blame Crestron, the integrator, you personally, etc., etc....
Thoughts, ideas??? TIA!!
|
Cisco 3.4 - booking about to begin popup?
just starting to use this module
is there a way to have a popup that a meeting is about to begin w/o user interaction?
all the bookings stuff seems to be predicated on the user selecting a booking
?
?mark
|
Re: RS232 protocol for Sony UBP-X1000
Search for this model on the Facebook group and you'll find lots of info.
--
Josh Winn
The LiquidPixel Group
|
Re: Autonomic MMS-5A and flash
I wouldn't count on any updates from Snap. My MMS-2A went belly up and when I called them they said the device was now obsolete and they wouldn't do any sort of repair work on it.
I know it's getting old but 2 grand and they won't help? All righty then. It actually worked out for the best though. With nothing to lose I pulled the drive and actually managed to restore it with registry backup files on the drive itself. So I cloned it then put in a new 1T SSD and now have a nicer unit with no need for a NAS or USB drive to have enough storage.? While I was at it I doubled the RAM in it from 2g to 4g with some old laptop memory sticks I had laying around and now it seems a bit quicker to index.
And FWIW, even though the iPad app is kinda crappy that should still work. Also, the iPad app for the McIntosh MS500 streamer will work since that's just a Mirage with some fancier internals.?
I don't know how their Windows app works but it seems like it should keep going since there's no browser involved. The setup pages are just straight HTML so they should just keep working no matter what.
I liked Autonomics more before Snap snapped 'em up...
|
Re: IR control of Samsung TU8000 TV's
please ignore this question, DM room boxes had gone offline.? thanks anyway.
|
Michael Braithwaite
Deuterios
Ryan Cunningham
josh@LiquidPixel