开云体育

You should get the LG 2018 module working again by downgrading SIMPL to 4.11.06 and DevDB 115. DevDB 116 was pulled because of the issues with CCDs and if you don't need to program a 4-Series I would

That is definitely the case for the Sony’s. The rs232 and simple ip control doesn’t have the capability to launch apps. Hope you can work it out for the lg. On the Sony I had to write my own

Ahh, I think I understand what you are saying....I might only be able to launch these services as part of the webOS (http) and there might not any RS232 commands available. Hmm, if this was the case,

I don’t know about LG webos sorry. On Sony you need to send commands directly to androidTV to launch specific apps via http requests. Maybe webOS has a similar high level API

I am looking for the RS-232 commands for the TV's build-in streaming services; in particular for Netflix and Amazon Prime. I got all the other commands working. During my search I found a pretty

If it's a Homeworks QS system, you can use the protocol manual. But it's much easier just to use a Lutron-provided module for Crestron that integrates with Lutron. Using the module, you don't really

Give the "SerialStringQueue.usp" file I just uploaded to modules folder a try. I haven't tested it, but I believe the general mechanics of what you will need are there.

Dear All, Can someone help me to make a priority queue in S+?. https://ibb.co/TqpB3k7 Please see the attached screenshot. My requirement is if any input button is high at the first time the

Well which is it? WIreless, or HomeworksQS? Have a look at the Lutron Integration Protocol. Everthing you need to know is in that document:

Thanks a lot @Gavin, great info. I might end up doing that after I finish with this job. The CT Neo theme looks good enough for 2020 IMO but those pressed states really ruin it for me.

why do u keep saying the same thing ? Have a great day, and please feel free to contact me if you have any questions or if I can help you in any way. Greg 631-806-5661

Yes,. Lutron system is homeworks. QS And I want control their lighting curtains everything which is connect their system using LAN. what is steps I should follow Sent from Outlook

Yes wireless Sent from Outlook Mobile<https://aka.ms/blhgte> ________________________________ Sent: Thursday, May 28, 2020 7:03:04 PM To: [email protected] <[email protected]> Subject: Re:

it depend on what lutron system you have : there are several versions available you may control them using RS232 / LAN and theirs even a wireless one whichever one you use (except wireless) will

You can also use a 12v relay to power it on and off.

I'm just going to through this out there... Maybe a Surface Pro running remote desktop? Split Zoom and Xpanel on the host PC. Maybe.

We are using custom i7 PC's to run Zoom, so no flex product. Using biamp audiaflex, ten table mics 360 degree usb camera Some nvx 350s 2 projectors / motorized screens I haven't settled on the sip

Which Lutron system (e.g. Homeworks QS)? Likely you’d need a Lutron QSE-CI-NWK-E Control Interface.

Dear? All, Kindly tell me how to control? Lutron lighting or system using my crestron system programming.

You have two options really - 1. Advanced buttons allow anything to be the pressed & selected state including your own graphics. However these can be time consuming to do a large number of and also I