Re: Pressed appearance of Buttons - VTPro #crestron #crestronapp

#235442

Thanks a lot @Gavin, great info.

I might end up doing that after I finish with this job. The CT Neo theme looks good enough for 2020 IMO but those pressed states really ruin it for me.

Re: How to control Lutron Lighting or system using Crestron Rmc3 processor #crestron #crestronapp

#235441

why do u keep saying the same thing ?

Have a great day, and please feel free to contact me if you have any questions
or if I can help you in any way.

Greg
631-806-5661

Show quoted text

On Thu, May 28, 2020 at 10:48 AM Rajat Dwivedi <dwivedi.rajat@...> wrote:

Yes,. Lutron system is homeworks.  QS
And I want control their lighting curtains everything which is connect their system using LAN. what is steps I should follow

Sent from Outlook Mobile

________________________________
From: [email protected] <[email protected]> on behalf of Gregory Davis via groups.io <gdavis5860@...>
Sent: Thursday, May 28, 2020 7:03:04 PM
To: [email protected] <[email protected]>
Subject: Re: [crestron] How to control Lutron Lighting or system using Crestron Rmc3 processor #crestron #crestronapp

it depend on what  lutron system you have : there are several versions
available you may control them using  RS232 / LAN and theirs even a
wireless one
 whichever one you use (except wireless) will integrate very well with
crestron

Have a great day, and please feel free to contact me if you have any questions
or if I can help you in any way.

Greg
631-806-5661

On Thu, May 28, 2020 at 5:58 AM Rajat Dwivedi <dwivedi.rajat@...> wrote:

Dear  All,

Kindly tell me how to control  Lutron lighting or system using my crestron system programming.

Re: How to control Lutron Lighting or system using Crestron Rmc3 processor #crestron #crestronapp

#235440

开云体育

Yes,. Lutron system is homeworks.? QS

And I want control their lighting curtains everything which is connect their system using LAN. what is steps I should follow

Sent from

Show quoted text

From: [email protected] <[email protected]> on behalf of Gregory Davis via groups.io <gdavis5860@...>
Sent: Thursday, May 28, 2020 7:03:04 PM
To: [email protected] <[email protected]>
Subject: Re: [crestron] How to control Lutron Lighting or system using Crestron Rmc3 processor #crestron #crestronapp

?

it depend on what? lutron system you have : there are several versions
available you may control them using? RS232 / LAN and theirs even a
wireless one
?whichever one you use (except wireless) will integrate very well with
crestron

Have a great day, and please feel free to contact me if you have any questions
or if I can help you in any way.

Greg
631-806-5661

On Thu, May 28, 2020 at 5:58 AM Rajat Dwivedi <dwivedi.rajat@...> wrote:
>
> Dear? All,
>
> Kindly tell me how to control? Lutron lighting or system using my crestron system programming.
>

Re: How to control Lutron Lighting or system using Crestron Rmc3 processor #crestron #crestronapp

#235439

开云体育

Yes wireless

Sent from

Show quoted text

From: [email protected] <[email protected]> on behalf of Gregory Davis via groups.io <gdavis5860@...>
Sent: Thursday, May 28, 2020 7:03:04 PM
To: [email protected] <[email protected]>
Subject: Re: [crestron] How to control Lutron Lighting or system using Crestron Rmc3 processor #crestron #crestronapp

?

it depend on what? lutron system you have : there are several versions
available you may control them using? RS232 / LAN and theirs even a
wireless one
?whichever one you use (except wireless) will integrate very well with
crestron

Have a great day, and please feel free to contact me if you have any questions
or if I can help you in any way.

Greg
631-806-5661

On Thu, May 28, 2020 at 5:58 AM Rajat Dwivedi <dwivedi.rajat@...> wrote:
>
> Dear? All,
>
> Kindly tell me how to control? Lutron lighting or system using my crestron system programming.
>

Re: How to control Lutron Lighting or system using Crestron Rmc3 processor #crestron #crestronapp

#235438

it depend on what  lutron system you have : there are several versions
available you may control them using  RS232 / LAN and theirs even a
wireless one
 whichever one you use (except wireless) will integrate very well with
crestron

Have a great day, and please feel free to contact me if you have any questions
or if I can help you in any way.

Greg
631-806-5661

Show quoted text

On Thu, May 28, 2020 at 5:58 AM Rajat Dwivedi <dwivedi.rajat@...> wrote:

Dear  All,

Kindly tell me how to control  Lutron lighting or system using my crestron system programming.

Re: How to on trinnov using crestron command #crestron

#235437

开云体育

You can also use a 12v relay to power it on and off.

Show quoted text

On May 27, 2020, at 9:43 PM, Rajat Dwivedi <dwivedi.rajat@...> wrote:

?Dear All,

anyone tell me how to power on trinnov using simple program, when i am going to off it is goes off but when i am trying to on trinnov it does not go on.

Re: Wireless control with Zoom rooms

#235436

I'm just going to through this out there...

Maybe a Surface Pro running remote desktop? Split Zoom and Xpanel on the host PC. Maybe.

Re: Wireless control with Zoom rooms

#235435

We are using custom i7 PC's to run Zoom, so no flex product.
Using
biamp audiaflex, ten table mics
360 degree usb camera
Some nvx 350s
2 projectors / motorized screens

I haven't settled on the sip interface, we were going to give the Zoom Phone a try, it has an Interop with our Mitel phone system. That way the UI is consistent
Thanks for the input!

Re: How to control Lutron Lighting or system using Crestron Rmc3 processor #crestron #crestronapp

#235434

Which Lutron system (e.g. Homeworks QS)?

Likely you’d need a Lutron QSE-CI-NWK-E Control Interface.

How to control Lutron Lighting or system using Crestron Rmc3 processor #crestron #crestronapp

#235433

Dear? All,

Kindly tell me how to control? Lutron lighting or system using my crestron system programming.

Re: Pressed appearance of Buttons - VTPro #crestron #crestronapp

#235432

You have two options really -
1. Advanced buttons allow anything to be the pressed & selected state including your own graphics. However these can be time consuming to do a large number of and also I believe they are not as optimal for performance (More of an issue if you are writing a UI for a legacy x50 panel or older iPad).

2. Create a new theme - You can download the CT_Neo theme from the Application market (you need the reasources and the theme export). Open it in Studio and save as a new theme - you can then do the file name swap in reasources to load your new files in place. This takes longer to do to change a few buttons but if you do a comprehensive job of modifiying the graphics you will have a reuseable theme. (In general the Studio theme editing is a bit wierd and not very well documented but if you are simply looking to colour swap or make mild modifications its easy enough)

Re: How to on trinnov using crestron command #crestron

#235431

开云体育

Trinnov is connected via IP it will work

Sent from

Show quoted text

From: [email protected] <[email protected]> on behalf of Thorsten K?hler via groups.io <thorsten.koehler@...>
Sent: Thursday, May 28, 2020 12:11:07 PM
To: [email protected] <[email protected]>
Subject: Re: [crestron] How to on trinnov using crestron command #crestron

?

Hi,

the latest Crestron module from Trinnov is v1.0.17.

You can download it directly from there website (support => downloads=>drivers=>Crestron).

You have to provide MAC address and IP address as parameters and then power on works.

Be aware that the Altitiude32 doesn?t power on via RS232.

Regards, Thorsten

?

Von: [email protected] <[email protected]> Im Auftrag von Rajat Dwivedi
Gesendet: Donnerstag, 28. Mai 2020 06:43
An: [email protected]
Betreff: [crestron] How to on trinnov using crestron command #crestron

?

Dear All,

anyone tell me how to power on trinnov using simple program, when i am going to off it is goes off but when i am trying to on trinnov it does not go on.

Re: How to on trinnov using crestron command #crestron

#235430

开云体育

Hi,

the latest Crestron module from Trinnov is v1.0.17.

You can download it directly from there website (support => downloads=>drivers=>Crestron).

You have to provide MAC address and IP address as parameters and then power on works.

Be aware that the Altitiude32 doesn?t power on via RS232.

Regards, Thorsten

?

Von: [email protected] <[email protected]> Im Auftrag von Rajat Dwivedi
Gesendet: Donnerstag, 28. Mai 2020 06:43
An: [email protected]
Betreff: [crestron] How to on trinnov using crestron command #crestron

?

Dear All,

anyone tell me how to power on trinnov using simple program, when i am going to off it is goes off but when i am trying to on trinnov it does not go on.

Re: How to on trinnov using crestron command #crestron

#235429

Wake On LAN, there is a sample program Trinnov can share. Ask the Trinnov sales rep. Don’t use serial the module is shit and there is no on

How to on trinnov using crestron command #crestron

#235428

Dear All,

anyone tell me how to power on trinnov using simple program, when i am going to off it is goes off but when i am trying to on trinnov it does not go on.

Re: Pressed appearance of Buttons - VTPro #crestron #crestronapp

#235427

The other options if you want to avoid using advanced buttons would be to put two entirely different buttons, one directly on top of the other with visibility joins so only one can show at a time.

Of course you can also always edit themes in crestron studio and just edit the selected state. Although studio can be a bit of a pain getting used to if you've never used it.

Show quoted text

On Wed, May 27, 2020, 9:06 PM David Chramcow <dchramcow@...> wrote:

Is there a way to change the appearance/color of the pressed state of a button in VTPro?

It's a shame a light-accent button like this one:?

Looks like this when pressed:?

Looks extremely tacky IMO, is there something to do?

INFO:
Theme selected: CT_Neo.xml

Re: Pressed appearance of Buttons - VTPro #crestron #crestronapp

#235426

On Wed, May 27, 2020 at 09:59 PM, Brian Erchenbrecher wrote:

If you use an advanced button instead of a standard button, it gives you much more flexibility to change the active state within the confines of the theme. You could also modify a button from within a theme asset package available on the Application Market, and import that as a custom option for the selected state of an advanced button, but I'd start by checking the native theme options. I also tend to hate the blue active/selected state of most common buttons and almost never use them, as there are a lot of better options available.

Thanks for the information. Really appreciate it.

If I may ask, what are you using? theme-wise, I'm really open for anything really, I just hate the thick blue pressed state.

Re: Pressed appearance of Buttons - VTPro #crestron #crestronapp

#235425

Just be cautious using tooo many Advanced Buttons. If you use them in a SRL, you will seriously lag the panels. Those buttons were added just for features, but they also drain the meager adobe air (flash) engine to make the panels take a while to draw.

Re: Pressed appearance of Buttons - VTPro #crestron #crestronapp

#235424

If you use an advanced button instead of a standard button, it gives you much more flexibility to change the active state within the confines of the theme. You could also modify a button from within a theme asset package available on the Application Market, and import that as a custom option for the selected state of an advanced button, but I'd start by checking the native theme options. I also tend to hate the blue active/selected state of most common buttons and almost never use them, as there are a lot of better options available.

Re: Modifying part of a Serial String with an Analog Value #bestpractices #crestron #values

#235423

Thanks a lot @Lincoln King-Cliby

Unfortunately I had to move on from that in order to finish other parts of the project/program, but I will definitely revisit it later on.

Thanks again mate!