开云体育

I have had my share of corrupted files over the last 20+ years, more often on SSD drives than mechanical drives. MEMEO Backup has saved my behind several times, runs real-time and creates new backup

I've had something similar to this happen. One thing to try is to download Notepad++. Then right click on your .smw file and select "Edit with Notepad++". Once it opens in the editor, go to edit->EOL

Did you try opening the files on a different PC? Same thing has happened to me a few times over the years, especially vtp files. The only thing that made the PC work with the Crestron software again

Anything changes on this front in terms of iPhone resolution? In the process of redoing our iPhone interface. Been using the iPhone 5 version in VTP uptil now.

Double click the module, select any of the signal names and press "shift + control + B"

Absolutely Change your password on your router and turn auth on your processor Then spoof your ports on your firewall don't use the normal ports Numbers externally. please follow read the crestron

If you do an internet search on nk.exe you will find that nk.exe is part of the? Windows Embedded CE OS and starts up very early in the boot process. If the program has work for years without issues,

Hi, Can anybody shed any light on this error please? 3. Notice: nk.exe # 2020-04-13 11:20:25? # CRM1: packet length(8), bytes read(8) 4. 5.? 92 6.? 06 7.? 20 8.? 03 9.? 03 10.? 00 11.? 05

Thank You, Dustin!!!! (I must have missed it, in the documentation...:)? )

AV Master, I've successfully done 3 Lutron integrations in the last few months. If you'd like another set of eyes to look in, I'd be happy to help sometime this week. Reach out if interested:?

Bus numbers set? Latency ok? Mac address routing?

Hey all! We are using a Denon HEOS multiroom system in our home. The crestron system (RMC3/TSW752) is expanded with MP-B10 Keypads in each room, so we don't need our smartphones to control the music.

If it was "easy", anyone could do it. Lutron QS and Crestron have been integrated successfully THOUSANDS of times, so there are only three possibilities... 1. The Lutron processor is defective. 2.

Lutron supports these modules have you reached out to them?

I have crestron and lutron at my house. Almost all the time it works fine. But I’ve had the situation where If I reprogram the lutron homeworks qs processor it’s then the crestron won’t connect

Thanks for the insight but yeah, Im using the QS modules for sure. ?I’m moments away from throwing in the towel on this one. its especially frustrating when little creeper things like this happen

So this is a bad idea but it’s my house, where bad ideas reign supreme ? In the living room I have a Cisco VTC camera -> DM-TX-201-C ---(direct DM link)--> DM-RMC-100-C --> Cisco C-series CODEC

Got it thanks!? I am sending this to Touchpanels so I send through the DM to the 1542 and stream to the TSWs.

Ctrl+Shift+b would be the shortcut you're looking for.

Hi All, I seem to remember in the back of my mind, hearing that there was a way to automatically populate the signal names on a module. I can't find anything about it.... If you just hit return on