开云体育

Create an email template (Attribute). Add a serial tag insert. Go back to attributes TAB in setup and find the serial join data you want to be included in the email, Select the email rules TAB and

Thank you guys, the hint from Maksym, regarding the embedded video app?s on/off join, seems to improve the bahviour. What? I?m testing now: Keep this join off. When flipping to the surveillance

Extreme makes a Poe++ switch that will power 24 nvx. It’s not cheap though. I’d go the midspan route

Hi! How are you doing? The IT guy has configured the addresses. I can see the addresses going to Crestron, but for some reason the 2.5 module doesn't put it on its outputs. Smart Graphics are ok, I've

Are you sure there is an address book loaded into the Polycom?? Log into it using a web browser and check.? Also, I typically only use either the local or the global, not both, so make sure your

I've programmed a few systems with Lilin cameras and NVRs, and they always worked great with Crestron. If you want, I can send some URL examples I used, and I may also have a protocol doc from their

Hi, group! How are you doing? I hope this message finds you well. Well, I'm a newbie in this huge world called Crestron, and today I was on field to integrate a Polycom Group 700 in a system already

I also posted this on labs and someone there came up with a solution to double encode the embedded url Thanks

We have used the Microsemi PD-9524GC 24 port midspan injector in the past for remote powering NVX units. I did also find the Planet UPOE-2400G injector but have not used it.

I have an upcoming system that will require a 12x12 ish NVX setup but all endpoints and transmitters (350s or 351s) must be POE on a single switch.? I'm aware that the requirements are POE++ or

https://drivers.crestron.io/ for the PKG file.? Extract it to get the 2 files to store on the processor. and the CCD module is in the Simpl database.? Define the IP and where to look for the files

I just saw that there are CCD drivers in the Crestron SMW Library; however the version is v1.2 now. It has (10) custom commands with 'Exists' FB and Name Text. 1. Anyone used this successfully? 2. Has

I tell my clients to use the camera app that came with the NVR/DVR. Solves all the problems.

On Wed, Apr 15, 2020 at 11:47 AM, joshua zimmerman wrote: > > FUSION - is a customizable monitoring software Onprem/Cloud (think help > desk options, energy management, higher education support desk

The Home/Away/Goodnight are "Tell Crestron" commands, not regular commands. If you want to use Home/Away/Goodnight without saying "Tell Crestron..." you can just create a routine.

Deprecated commands?? Is there a reference that you could point me to? From: <[email protected]> on behalf of Gavin <gavin.campbell@...> Reply-To: <[email protected]> Date:

I'm using the "Crestron Certified Drivers VideoServer Ethernet 1.0 (cm)". I originally tried several of the modules in the files section and found the Crestron driver to be much faster and more

Yes, the osc is to get a press and hold to keep sending the command for better scrolling. Ryan Cunningham

Thanks All for the Feedback. A couple more questions: 1. To TRoberts and rpc78? -? I'm not sure that I understand using an OSC for basic control of the NAV commands, could you explain? OR is this

I have customized the emails we get from fusion with our College header.? i have fusion monitoring my IP table to send me an email if something is offline. My question is - How do I insert a serial