MC3 - Issue

#230178

I am hoping someone can help me.? My gut is telling me my SD Card is beginning to go on a MC3, but the odd thing is I can load previous versions of my program and write them successfully to the processor.? The minute I make any change and recompile, it ultimately ends up being loaded to the processor, but never runs.? Here is a dump of the error log.? I can't think of what could be causing this.

132. Error: LogicEngine.exe # 2019-01-21 19:34:10? # SplusIntfc: Registration failed = 2

133. Error: LogicEngine.exe [App 1] # 2019-01-21 19:34:10? # Could not find SIMPL+ module Remote_Service_Connection_Manager_v1_1_1.dll in S-12.1:S-3.

134. Fatal: LogicEngine.exe [App 1] # 2019-01-21 19:34:10? # Unable to Load SIMPL+ Module(s) - terminating program load.

135. Exception 'Raised Exception' (-1): Thread-Id=09c4004a(pth=87216910), Proc-Id=0913007a(pprc=874894c8) 'LogicEngine.exe', VM-active=0913007a(pprc=874894c8) 'LogicEngine.exe'

136. PC=4006a020(coredll.dll+0x0005a020) RA=8021a2c8(kernel.dll+0x000062c8) SP=002afcc8, BVA=002afcfc

137. Fatal: LogicEngine.exe [App 1] # 2019-01-21 19:34:10? # Exception [SIMPL+ Module Not Found] in CControlSystem occured

138. Error: LogicEngine.exe [App 1] # 2019-01-21 19:34:12? #? Simpl Plus Manager terminated. Restarting program?

139. Error: LogicEngine.exe [App 1] # 2019-01-21 19:34:21? # Timeout waiting for end of configuration confirmation from slave Slot-02.IP-ID-16.

140. Fatal: LogicEngine.exe [App 1] # 2019-01-21 19:34:42? # Unable to stop S+ exit thread.?

141. Error: TLDM.exe # 2019-01-21 19:34:42? #? CTLDMEthernetStackApplication - Unable to exit App Specific Rcv Thread?

142. Notice: TLDM.exe # 2019-01-21 19:34:44? # **Program 1 Stopped**

143. Error: nk.exe # 2019-01-21 19:34:44? # WDG: LogicEngine shutting down unexpectedly. Do Not Start=0

144. Info: LogicEngine.exe [App 1] # 2019-01-21 19:34:53? # Loading program from \SIMPL\app01

145. Info: LogicEngine.exe [App 1] # 2019-01-21 19:34:53? # Loading Program \SIMPL\app01\FreerTheater - v80.bin.

146. Error: splusmanagerapp.exe [App 1] # 2019-01-21 19:35:27? # Got load exception System.TypeLoadException: File or assembly name 'SimplSharpCryptographyInterface, Version=1.0.6197.21123, Culture=neutral, PublicKeyToken=1099C178B3B54C3B', or one of its dependencies, was not found.

? ?at System.Reflection.Module.GetT147. Error: splusmanagerapp.exe [App 1] # 2019-01-21 19:35:27? # ypes()

? ?at Crestron.Logos.SplusManager.SplusManager.LoadModule(SPLUS_INTERFACE_MODULE_REGISTER_MESSAGE_STRUCT regMsg)

? ?at Crestron.Logos.SplusManager.SplusManager.c()

? ?at Crestron.Logos.SplusManager.SplusManager.aa(Object A_0, EventArgs A_1)

? ?148. Error: splusmanagerapp.exe [App 1] # 2019-01-21 19:35:27? # at Crestron.Infrastructure.CresMsgQ.RaiseDataOnQueueEvent(Object obj, EventArgs args)

? ?at Crestron.Infrastructure.CresMsgQP2P.d()

Re: simpl#

[email protected]

#230177

This should get you started -?

Steamist Sauna Control

#230176

Hi everyone

Does anyone have a module that can control this device? I was using the one in the application market but they have changed the ports to udp 30303 and the olde one is 9761 and theres no way to change that.

Any help is appreciated.

Thank you

Re: simpl#

#230175

开云体育

Depends on what you mean by ‘send’.

?

If it’s something synchronous or an async driven from the S+ side you can use a public string (or the return value from a function) to get ‘read’ S# data

?

If it’s something asynchronous from the S# side you can fire an event with the string in the event args.

?

Beware each time you cross the managed code boundary between S+ and S# you see a bit of a performance penalty so it is best to package data in such a way as to minimize the number of times you’re going back and forth…

?

Lincoln

?

--

Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Platinum)
ControlWorks Consulting, LLC |
D: (+1)440.771.4807 | O: (+1)440.449.1100? | F: (+1)440.449.1106
Crestron Services Provider | Biamp Authorized Independent Programmers | Extron Qualified Independent Programmer

?

Show quoted text

From: Crestron@... <Crestron@...>
Sent: Monday, January 21, 2019 10:11 AM
To: Crestron@...
Subject: [Crestron] simpl#

?

Hi all,

?

Recently embarked on the simpl# journey and there are a few things that I'm struggling with. The main one at the moment is how to send a string from simpl# to simpl+.?

?

Can anyone out there help me with how to do it?

?

cheers,

?

Jon

?

Re: MC3 Email anyone got it working

[email protected]

#230174

I am using the SendmailSharp_r1 and can not get it to work with Gmail. I have 2 step Authentication password? in the pass word and smtp.gmail.com and my email and a user name. I still get a error. What would I be doing wrong?

Re: Third party I/O

#230173

take a look at controlanything(dot)com

simpl#

#230172

Hi all,

Recently embarked on the simpl# journey and there are a few things that I'm struggling with. The main one at the moment is how to send a string from simpl# to simpl+.?

Can anyone out there help me with how to do it?

cheers,

Jon

Re: MC3 Image

#230171

Yes I am, thanks for clarifying.

Re: Sending commands to Echo

#230170

开云体育

Lol

Show quoted text

On Jan 19, 2019, at 4:05 PM, Lincoln King-Cliby lincoln@... [Crestron] <Crestron@...> wrote:

?

Put a touchpanel next to the Echo and have it play MP3s “Alexa, unlock the front door”

?

Absolutely fool proof :)

?

?

--

Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Platinum)
ControlWorks Consulting, LLC |
D: (+1)440.771.4807 | O: (+1)440.449.1100? | F: (+1)440.449.1106
Crestron Services Provider | Biamp Audia Certified | Extron Qualified Independent Programmer

?

From: Crestron@... [mailto:Crestron@...]
Sent: Friday, January 18, 2019 11:10 AM
To: Crestron@...
Subject: [Crestron] Sending commands to Echo

?

Maybe I have missed it, but I am wondering if we have a way to send commands to Alexa to operate things it controls that we do not currently have direct control of but it does. ?Is there a way for me to have Crestron tell Alexa to lock the door, for example.

Re: Sending commands to Echo

#230169

Or stick one of these to your Alexa and have it play audio files:

Show quoted text

On Sat, Jan 19, 2019 at 5:06 PM Lincoln King-Cliby lincoln@... [Crestron] <Crestron@...> wrote:

?

Put a touchpanel next to the Echo and have it play MP3s “Alexa, unlock the front door”

?

Absolutely fool proof :)

?

?

--

Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Platinum)
ControlWorks Consulting, LLC |
D: (+1)440.771.4807 | O: (+1)440.449.1100? | F: (+1)440.449.1106
Crestron Services Provider | Biamp Audia Certified | Extron Qualified Independent Programmer

?

From: Crestron@... [mailto:Crestron@...]
Sent: Friday, January 18, 2019 11:10 AM
To: Crestron@...
Subject: [Crestron] Sending commands to Echo

?

Maybe I have missed it, but I am wondering if we have a way to send commands to Alexa to operate things it controls that we do not currently have direct control of but it does.? Is there a way for me to have Crestron tell Alexa to lock the door, for example.

Samsung UE55Hu7500T

#230168

Does anyone have a module to control samsung TV's on IP in the UK or works in UK please? Also bluray would be fab too, looked on market place but all seem to be US.

Many Thanks Guys

Re: Sending commands to Echo

#230167

开云体育

Put a touchpanel next to the Echo and have it play MP3s “Alexa, unlock the front door”

?

Absolutely fool proof :)

?

--

Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Platinum)
ControlWorks Consulting, LLC |
D: (+1)440.771.4807 | O: (+1)440.449.1100? | F: (+1)440.449.1106
Crestron Services Provider | Biamp Audia Certified | Extron Qualified Independent Programmer

?

Show quoted text

From: Crestron@... [mailto:Crestron@...]
Sent: Friday, January 18, 2019 11:10 AM
To: Crestron@...
Subject: [Crestron] Sending commands to Echo

?

Maybe I have missed it, but I am wondering if we have a way to send commands to Alexa to operate things it controls that we do not currently have direct control of but it does. ?Is there a way for me to have Crestron tell Alexa to lock the door, for example.

Re: Samsung DB55e direct channel call?

#230166

Do you have information on how the Channel (Major and/or Minot) Hi-Low are divided up between the two bytes?
I don't currently have a TV to test against.

Show quoted text

On Wed, Feb 7, 2018 at 12:48 PM jaaron7@... [Crestron] <Crestron@...> wrote:

?

What specifically are you looking for? I don't think I've used a DB-E model, but Samsung commercial monitors all use the same commands. Direct channel control is poorly documented as always, but it does work on the models I've needed it for.

"The direct channel control is tricky, and took me a while to figure out. On the ME-C series, it would only let me send a direct number if it was already programmed in the monitor (channel scan).

From the manual:

Channel Query:
0xAA 0x17 0x00

Set Channel:
0xAA 0x17 0x08 <Minor-Hi>

Ack:
0xAA 0xFF 0x0A 'A' 0x17

Nak:
0xAA 0xFF 0x03 'N' 0x17

Country: 0 for Korea, 1 for US
ATV/DTV: 0 for Analog, 1 for Digital
Air/Cable: 0 for Antenna, 1 for Cable
Channel: high byte and low byte of channel in hex, 1-135 for Analog, 0-999 for digital
Sel-Minor: 0 for no minor channel, 1 for select minor channel
Minor: high byte and low byte of minor channel in hex, 0-999"

?

Re: Sending commands to Echo

[email protected]

#230165

It didn't work, thought you could send triggers from smart devices but you can't, only things in the devices tab(motion detectors, contacts, and I believe Samsung smart things).

Re: Sending commands to Echo

[email protected]

#230164

I was literally just thinking about this exact thing 2 hours ago, haven't tried it since I was at work. But I was thinking if you created a dummy light load in your crestron program using logic to actually drive it and then obviously discovered it with alexa, that you could set up a routine from there when the device did something. Just a thought, like I said, haven't tested it out yet. Hope it helps. Kevin

Re: Fusion discovery with multiple programs?

#230163

开云体育

Thank you for your reply Jason.?

?As I indicated in an earlier email each programs’ fusion symbol has a unique IP ID.

Thank you.

Show quoted text

On Jan 18, 2019, at 2:03 PM, jasonmussetter@... [Crestron] <Crestron@...> wrote:

?

The GUID is separate than the IPID.? The SSI module will take care of the GUID being unique.? However, if you loaded the same program into multiple slots, then the modules are probably all defined on the same IP-ID, which can't work.

You can only have an IP-ID defined for one slot, not sharing.? So you either need to move them IP-ID in the code for slots 2-10 and recompile, so all slots have the Fusion SSI module on different IPID's from each other, or maybe do some IP-ID remapping.

If all slots have the SSI module defined on same IPID, only the first slot is using it, and locking it out of the other ones since it can't be shared.? That is why you can only discover one program and not the others.

Sending commands to Echo

#230162

Re: Fusion discovery with multiple programs?

#230160

开云体育

? Interesting... Why have the 1 on the update digital? In Fusion class they had us pulse it at midnight. Do you know what the limit is for Fusion Room symbols in one program slot? The FSG folks had me set it up this way. They are super helpful, just very busy. They are contacting me Monday morning. Thanks for the info William.

Show quoted text

On Jan 18, 2019, at 1:01 PM, williamprice880@... [Crestron] <Crestron@...> wrote:

?

Additionally I use a different Fusion SSI ID for each slot or process plus I have a 1 on Digital Signal Update System Info on SSI 2.5. For the record, apart from the main program running on slot 1 I actually run a second slot with several rooms defined on them all with different IPID and SSI IDs. This is to follow room scheduling for rooms that do not have Crestron yet. In one case I have 6 rooms running on one slot zero issue.

Re: Fusion discovery with multiple programs?

#230161

The GUID is separate than the IPID.? The SSI module will take care of the GUID being unique.? However, if you loaded the same program into multiple slots, then the modules are probably all defined on the same IP-ID, which can't work.

You can only have an IP-ID defined for one slot, not sharing.? So you either need to move them IP-ID in the code for slots 2-10 and recompile, so all slots have the Fusion SSI module on different IPID's from each other, or maybe do some IP-ID remapping.

If all slots have the SSI module defined on same IPID, only the first slot is using it, and locking it out of the other ones since it can't be shared.? That is why you can only discover one program and not the others.

Re: Fusion discovery with multiple programs?

#230159

I'm looking at my working setup Bottom parameters on the 2.5 SSI Here's what i got for CP3N

Processor Type Standard

Primary SSI NO

Prefix_GUID Yes

Append_Program_Slot Yes

File Location Internal

Fusion SSI ID 10d (11 for next one etc..)

Scheduling ID 10d (I use a scheduling module so i increment that for every room as well)

Use Time Sync No.

My Ethernet offline manager is looped with the update request from the right side to "offline" on the left

Digital Signal Update_System_Info on SSI module is set to 1

My fusion ids are set starting F0 and increment to F1 and F2 etc....

Finally my last SSI module has a [To_Program_Initt_Complete] digital signal that I actually send to CP3_USERPROGRAMINIT to let it know initialization is complete for all modules.

Nothing else not GUI modules or else.