开云体育

Thank you for the feedback! I also watch a YouTube Tutorial "Crestron Amazon Alexa" and this guy shows that we need two different Crestron skills inside the Alexa App. But there is only one Skill!?

Blackmagic Videohub 12x12 -- this one's actually designed to be controllable, and works nicely. [Crestron] <Crestron@...> wrote:

Anyone care to weigh in on a favorite 3G SDI (or 12G, but I really only need 3G) matrix that's reasonably controllable via Crestron (422 or IP)? I need a minimum of 9 inputs and 6 outputs, so not a

Homeowner has asked us to provide a maintenace service on a system we did not supply or install, and on an apartment he intends to rent. . I went along last week to take a look at what had been

Same here. I've been told it's already under Investigation.

Hello, since a few days the Crestron Skill is available for Amazon Europe (in my case Germany). But it's still not possible to register my Crestron processor with my Amazon account! After sending the

You can get the file on the Application Market. http://applicationmarket.crestron.com/neo/ Crestron@...> wrote:

I am trying to add a font to the Neo theme, but I do not have the right file to edit in Studio. TB says I need the file CT_NEO.core3_theme_x, but I do cannot locate it on my PC and it is nowhere to be

Sorry, I mean DNS was setup correctly. The weather object worked fine. I also found the status of the touch panel in Toolbox showed "offline". I don't know what information that status is telling me.

Not sure why this is the case. In my case, I have an iPhone and iPad App on my MC3. I ran across this issue very recently and was initially perplexed as I hadn’t changed anything that I was aware of

Many thanks for the reply, and it's got me nearer the solution... But it's getting weirder... I have 3 mobility projects on a CP3, all on an SD card (as is the program). I deleted all three projects

Try removing/deleting it from the Processor and then reload. I too had this issue and this process worked for me. Best regards, Tel: 561.391.1843 P.O. Box 273406 : Boca Raton, FL 33427

Sorry to resurrect an old thread, but suddenly I'm having the same problem! Only on a 3 series processor - mobile projects suddenly say "Platform Not Supported" I updated to the latest firmware (1.5)

So those units do have an RS422 port but the website SDK is for C# or C++ I think, your best bet would be contacting Blackmagic support and finding out if you can control it over 422. If you can, ask

Yes, DNS setup. I had the weather object which works now. Thanks,

Sorry for the delayed response- I was away for a bit. In simple systems I just have the press from the touchpanel tied directly to the desired button signal on the RSD in simpl. No OS or anything is

If it's anything like their TV Studio switchers, there is no supported protocol for direct control. They offer an SDK that can be used to develop a PC or Mac application, but nothing usable from

dns settings on touchpanel setup correctly?

*"Just out of curiosity, what would you want to control?"* Since a Solstice box always has a hot video signal coming out of it, the ability to know whether a device is connected or not would be nice.

In this case you are better off using D3 Pro to do the full design for the system for lighting. Assuming you don't have any TSWs, you will not need to do any programing in Simpl. D3 will generate the