开云体育

I open up the theme in Studio, Copy the images into resources, create my Image Map, then create a Animation Style for it. Now I have the different animations available whenever I need one because they

Go into the TV menu and find SimpleIP and turn it on, even if you are only using rs-232. From: <Crestron@...> on behalf of "mingomaster@... [Crestron]" <Crestron@...>

Greetings. Has anyone been able to stream directly from the Flir to the TSW Panels ? If so can you suggest to me a configuration? Thanks

It's not possible to get this working in all cases. You have three options: 1) get power feedback from the display somehow (current sensor, light sensor, USB power detect, EDID detect), 2) use a

"Or put your DPAD signals (up, down, left, right) into a NOR and drive the STOP command from the output. As long as the STOP logic is only edge triggered, there's no need for any additional pulse

Thanks, will give it a try. Steve

There should be a sample program in the zip file you used. Look at that for reference I how things are hooked up. You'll probably mostly be using the basic in and out modules.

the problem is SIMPL Windows 4.06.01 go back to 4.05 mark

So I have a TV that only has a power toggle. I have to correct logic ( I believe) to only execute the power command when sources are selected after the TV is on so it doesn't turn it back off, and I

new here in Crestron programming, I am working on a project which includes Audio Conference, with VoIP interface, my processor is CP3 and it is controlling the DSP via RS-232. I downloaded the

Nope I'm talking about the Xlink connection on the back of the tv . Thanks , Mingo

What we have always done is 1:1 sonos connects going through the SWAMP. When the zone is "Off" we instead switch to the SONOS and fix the volume on the SWAMP, This allows the client to have the full

Are you talking about an RS232/HDMI model using a cbxh11 interface? Then yes. Of so, we remove pin13 from the HDMI input board of the cbx box and that seems to make it much better.

In the power setting make certain the following are set: Setup - Quick Start On System Options - Power Control Off It is also always best to update firmware. Mike Sent: Wednesday, January 18, 2017

Keith, Would you just copy the the spinner animation then swap the 'Frames' for the frames of your custom animation then include in the completed theme? Thanks Aaron

Has anyone experienced loosing controls on tv power on when tv is left off for more than an hour ? And the only way to get it back working is to turn tv with tv remote its self Any suggestions?

It was quite a tricky process as we had over 20 systems each with a 16x16DM frame and AV3 and 6 or 7 DM transmitter inputs in each frame. We used an RMC3 to handle all the mac address programming.

Thanks Andrew! Yeah if that's how it works then most likely the problem is that one of the callbacks *is* static, but the others aren't. I'm guessing that in order to change it the SIMPl# library

Interesting…I’m sure someone said that to me before…I can’t remember anything anymore it seems :P Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer |

I have one that utilizes the dynamic list sg if your interested. It's a press and hold to dial type module.