开云体育

Thanks, Lincoln! - Scott Lee ________________________________ Sent: Sunday, January 22, 2017 12:50 PM To: 'Crestron@...' Subject: RE: [Crestron] Vaddio & ClearOne modules? For ClearOne

Thank goodness, that's what I was hoping! - Scott Lee ________________________________ Sent: Sunday, January 22, 2017 12:45 PM To: Crestron@... Subject: Re: [Crestron] Vaddio & ClearOne

I think the best way would be using Simp+ and use an array for the inputs and outputs, then use a loop to spit out all the strings you need. From: <Crestron@...> on behalf of

For ClearOne it's the same protocol as on serial just with a login at the beginning of the session. You can implement that with a SIO that watches for the login prompt (IIRC, it's "login:") and

ClearOne IP commands are the same as serial - just need to log in to the telnet port. Crestron@...> wrote:

Does anyone have a good module/program for serial control of a Vaddio ControlVIEW Extreme, or for IP control of a ClearOne Converge Pro 880? I love working on legacy systems... Thank you for looking!

Hey all having one of those 'Got to be a better way to do this' moments this morning. I've got a Video router with 72 inputs and 144 outputs I need to get a serial string out with the label of which

For resi I still prefer bipad's and ampx's although those are few and far between now. The swamp is OK, but I frequently find myself running out of inputs. AAE's I thought sounded fine. I liked that

I have a few AAEs out in the field with Paradigm AMS100's and they sound great. I still think the AAE is one of the best audio solutions money can buy. I have the 4X100 and its just not enough

I agree, I used them for years before upgrading to a SWAMP. When we sell this house I'll likely take the swamp and put the AAE's back in service since I still have them collecting dust.

I use these at my house and love them, quality is great. I even bought one as a back up just in case.

Just curious on what everyones opinion is of the sound quality for these systems? I am looking to move away from my current setup (extron MAV 16X16 and speakercraft BB1265 amps) into a couple AAE

Thanks - I'll add that to my list of things to try next time. Geoff [Crestron] <Crestron@...> wrote:

The Reset for MLX3 is pull one battery and while holding down the back ( on the side below the scroll wheel) button, reinsert the last battery and keep the back down down for a few seconds and the

I agree.

A variation on Answer ID 5293 on Crestron's site resolved the issue; I only needed to perform the first 4 steps at which point the remote reloaded the latest version of the project without any further

Ok thanks Thanks , Mingo

I made some minor changes to my VisionTools project for my MLX-3's earlier tonight. One of them updated just fine, but the other keeps cycling between displaying the "Starting..." screen, black

DM frames have telnet on by default. 41794 wouldn't work, that's the port for CIP and is used for communication between the DM chassis and the control system. 41795 would work as well, especially if

No I'm pretty sure we did it via telnet to the DM frame. So 23.