开云体育

Thanks, will give it a try. Steve

There should be a sample program in the zip file you used. Look at that for reference I how things are hooked up. You'll probably mostly be using the basic in and out modules.

the problem is SIMPL Windows 4.06.01 go back to 4.05 mark

So I have a TV that only has a power toggle. I have to correct logic ( I believe) to only execute the power command when sources are selected after the TV is on so it doesn't turn it back off, and I

new here in Crestron programming, I am working on a project which includes Audio Conference, with VoIP interface, my processor is CP3 and it is controlling the DSP via RS-232. I downloaded the

Nope I'm talking about the Xlink connection on the back of the tv . Thanks , Mingo

What we have always done is 1:1 sonos connects going through the SWAMP. When the zone is "Off" we instead switch to the SONOS and fix the volume on the SWAMP, This allows the client to have the full

Are you talking about an RS232/HDMI model using a cbxh11 interface? Then yes. Of so, we remove pin13 from the HDMI input board of the cbx box and that seems to make it much better.

In the power setting make certain the following are set: Setup - Quick Start On System Options - Power Control Off It is also always best to update firmware. Mike Sent: Wednesday, January 18, 2017

Keith, Would you just copy the the spinner animation then swap the 'Frames' for the frames of your custom animation then include in the completed theme? Thanks Aaron

Has anyone experienced loosing controls on tv power on when tv is left off for more than an hour ? And the only way to get it back working is to turn tv with tv remote its self Any suggestions?

It was quite a tricky process as we had over 20 systems each with a 16x16DM frame and AV3 and 6 or 7 DM transmitter inputs in each frame. We used an RMC3 to handle all the mac address programming.

Thanks Andrew! Yeah if that's how it works then most likely the problem is that one of the callbacks *is* static, but the others aren't. I'm guessing that in order to change it the SIMPl# library

Interesting…I’m sure someone said that to me before…I can’t remember anything anymore it seems :P Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer |

I have one that utilizes the dynamic list sg if your interested. It's a press and hold to dial type module.

I took a shot at writing some basic instructions to help people get started. Since you just went through this I'd greatly appreciate it if you could review it and make sure it makes sense and follows

I feel like I've written this same post about 10 times over the years, but has anybody had issues with the latest databases? Two separate files that have always worked fine on two separate pc's. After

TSID IS the serial of the device. Put that in your Windows Calculator in HEX mode, then hit the Decimal button and that number is the serial # that is on the box for the device. [Crestron]

I'm back at this. With respect to 60 series panels only... Method 2/3; Why would one even bother giving the client the Media Player? You can just give them access to the Sonos APP and they can get

Where? All I see is the TSID. Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K ControlWorks Consulting, LLC | Crestron Services Provider |