开云体育

I wrote one that does most of the basic features. I wrote it before realizing that one may connect over TCP, so I implemented retransmit logic for UDP. It has been absolutely flawless for me; for two

Matt, Did Big Ass Fans ever send you their Crestron driver? If so, would you mind sharing it? I have a customer with two fans and an Element wall controller. Told them I would look into controlling it

Ok, so I want to multicast stream a preview monitor to 3 TSW 1060. The System will already have a Netgear GS724Tv4 for Biamp AVB--can I make a VLAN for the Crestron subnet with IGMP snooping apart

The HW-J250 has discrete input commands that you could try. You can get the codes from the Global Cache' Control Tower database.

x = the input card number. You would pre-populate all the DM input cards in simpl windows with a transmitter and then also add an offline manager for each transmitter. When a transmitter comes online,

I'm using the Crestron IP module from the Arcam website but the results have not been stellar. Unit locks up and must be hard rebooted (after a Crestron processor upload); it cycles itself on and off.

Wondering if any has come across Discreet Input IR commands for samsung sound bars (HW K950) i got a project where we have the TV audio on the digital input, and separate music input on the analog in.

Does anyone have a sample program to work with this unit ? trying to figure how to communicate with it to trip relays, adjust tones and Vol Etc. Thanks

yeah i only have to do this for 4 transmitters, so wont need to read and write. question though in this command "rcon slot x.1 est\r" what is the x.1? if i wanted to query input 4/5/6/7 on a DM 16x16

With all the Energy Smart stuff we've found many devices need a little push to wake up. On most of our Samsung models we send the power on command twice,(power off too) works every time

Did you ever figure this out??

Something changed on either the SmartThings or Crestron side that introduced a bug in the code for an occupancy sensor connected a SmartThings hub. I've loaded an update onto github. In addition,

IMO, it wouldn't work very reliably because the Occ sensors have timeouts and can be tripped from multiple distances. You'd be better off putting a beam sensor at each end of the stairs and then

OP Try using the UN55ES8000 IR codes from the Crestron Database. Been using it for years for discrete's, up to this year's KS9000 Trey Sent: Tuesday, January 17, 2017 4:39 PM To:

Assuming 2 motion detectors (one at the top of the stairs and one at the bottom). One solution is to run the motion detectors into logic wave pulse symbols so the output of the motion sensor is

CoolMaster Net

Have a client that has multiple occupancy sensor in his staircase and would like to trigger different loads in different ways depending on which direction he is going. Up versus down of course.

Thanks for the reply guys worked perfectly!

Fair point Chip.

Are there any new hvac zone controllers that communicate in similar fashion to the old carrier comfort zone systems?