开云体育

Hey, does anyone happen to have example commands to change the text on one of these LED displays? Thanks.

Some good points Trey, I personally would pay the 50 bucks in a heartbeat to have this working and not be using (because its not wasting) other's or my own time getting something to work just to not

http://www.absoluteacoustics.com Reliable and affordable. 2017-01-12 19:03 GMT-02:00 steve@... [Crestron] < Crestron@...>: -- Leandro Fernandes Skype: Lefernandesrj Tel.: (11)

Does anyone have the module for the Rotel RT-1570?

Not sure where you are based Steve, but check these out: neo:Modular 8x8 w/ HDBaseT Pro - Pulse-Eight https://www.pulse-eight.com/p/184/neomodular-8x8-w-hdbaset-pro# neo:Modular 8x8 w/ HDBaseT Pro -

Just a quick note to let you know that I've added two new blog entries this week to my blog, Topics in Home Automation. 1) Networking and IoT Device Integration 2) Cutting the Chord Update Here is a

leave it to Chip to bring me back to earth…...

We all only hope someday to be as good as you Trey. Hopefully you won't move on from us and take away all your incredible knowledge. In the meantime I'll keep using IR as for

Filezilla can connect to touch screens on the control subnet if you set up port mapping on the processor. In one room I connect to 4 different touch screens on the control subnet with the following

Several things locked down? Like an Apple ID, password, and AirPlay name? Only two of those are locked down at purchase. Aren't those items always locked down when you get onsite... ...relicensing

On a cp3n you can do port forwarding Forward a specific port to the FTP port of your tp Use filezila pointing the port you set. Crestron@...> a écrit :

"you can put an entry in your address book: <name> auto <LAN addr of proc>; pat auto,<dev host name>,port" Everyone is missing where the OP was asking about NON-Toolbox apps... :) - Chip

Does anyone have an IR driver for the Bose Soundtouch 300? I tried the Soundtouch 30 codes from the URC database, but that didn't work. I also tried the IP module from the marketplace, but it was very

I'm moving on to IR. I'm sure the untimation module works just fine but there are several thing that must be locked down for it to work, the dealer I am working with agree with me that we don't want

The way you can do it is by using the toolbox script pointing to the correct port. Crestron@...> a écrit :

funny, I was just talking with an engineer onsite today that said they dropped Atlona use (company wide) because of the reliability problems as well. Atlona was causing too many return visits and

So does CEC Sent from my pocket computer

you can put an entry in your address book: <name> auto <LAN addr of proc>; pat auto,<dev host name>,port basically, fill in the "control subnet" box on the right side of the address entry

"Is there a way to connect to it on the control subnet from the LAN side?" I *believe* (and could be completely wrong) that when you connect to a CS device from the LAN side using Toolbox - Toolbox

We have been selling a new type of seamless matrix called TekFlex. This matrix comes in 16 and 32 ports. The first 12 ports can be either inputs or outputs. So if you need 12 x 4 just place the cards