Re: Updated IP control of Directv?

开云体育

Thanks Caleb. That was what I was trying to get across. LOL

On Dec 11, 2016, at 3:53 PM, Caleb Radecky caleb@... [Crestron] <Crestron@...> wrote:

?

To be clear on the module front, most calls I get are related to the DIRECTV webserver and "local" functions that the IP API doesn't work with on Genies, such as navigating some of the menus and power. No issue is because of Crestron or the module.

As with anyone who is using the module, and you run into a situation where something's not working as expected, feel free to give us a call. We are happy to look into the issue and get your feedback on the module.

Sent from my mobile. Please excuse brevity and any typos.

Caleb Radecky |?Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC |?Crestron Services Provider?| 701 Beta Dr. #22 Cleveland OH 44143
P.440.449.1100 X1109 | F.440.449.1106 |

-----Original Message-----
From: ComeAlive@... [Crestron] [Crestron@...]
Received: Saturday, 10 Dec 2016, 18:38
To: Crestron@... [Crestron@...]
Subject: [Crestron] Re: Updated IP control of Directv?

?

+1 for the Control Works module. ?There are a couple of issues with controlling DTV via IP. ?Random loss of control when navigating menu or info bar. ?No power control for Genie clients. ?My understanding of these limitation have nothing to do with CWs but the way that the Crestron system handles the IP control and the limitation of DTV receivers.

Re: Sharp PN-U423 Control Using BPC 8

#218433

开云体育

Depends on whether the user has access to control without Crestron and whether the unit may be polled for current level.?

But an AINC to EQU to SIO will do for one way control.?

Show quoted text

On Dec 11, 2016, at 7:28 PM, Proflagony@... [Crestron] <Crestron@...> wrote:

?

Great, I got it. ?Thanks. ?Next question, to control volume "VOLM ?30" puts the volume at 30 and "VOLM ?20" puts it at 20 and so on. ?There is no volume up/down command that I can see. ?So if only using a BPC-8 to control am I still stuck putting an IR sensor on the front for volume. ?Any ideas??

As always thanks everyone.

Re: C2N-CBD

#218432

开云体育

Just do a D3 program with an RSD and put in another slot.?

Show quoted text

On Dec 12, 2016, at 8:39 AM, Marcelo Deoliveira marcelode@... [Crestron] <Crestron@...> wrote:

?

Thanks Steve
?

On Sunday, December 11, 2016 10:34 PM, "Steve Hedges steve-hedges@... [Crestron]" <Crestron@...> wrote:

?

Write the program in D3. If you need to add it to another program, open the file that d3 created and take what you need.

On Dec 11, 2016, at 8:33 PM, marcelode@... [Crestron] <Crestron@...> wrote:

?

Can anyone send me a sample of a program for C2N-CBD to control a dimer module.
I have a few keypads and 01 dimmer module.
I always use DIN-AP3 which is very easy to donthe switches but now I am going to use simple window for a MC3.
I want to be able to use the button as toggle and hold it to raise and lower the brightness. It will be 6 buttons per keypad controlling individual loads.
Thanks

Re: iRobot Roomba 980 via crestron?

#218431

the roomba 980 comes with an wifi module built in... that company created their own API via their wifi module.. i had already googled that.. the link i posted takes advantage of the built in module but the api calls were done for smartthings and im not sure how to convert that into a creston http call!

Re: Http live headers

#218430

You don't really need an extension anymore -- Firefox and Chrome both open a Developer Tools console when you press F12.? There's a Network tab that shows details of requests (generally starting from when you open Developer Tools, so you'll need to reload the page to see the request).

Show quoted text

On Sat, Dec 10, 2016 at 10:24 PM, jonathany126@... [Crestron] <Crestron@...> wrote:

?

Their SDK is on their website.?

Re: Cisco C20 Module

#218429

Thanks Andrew, I just wanted to make sure since I will never see this job site.

erik

Re: C2N-CBD

#218428

Thanks Steve

?

On Sunday, December 11, 2016 10:34 PM, "Steve Hedges steve-hedges@... [Crestron]" wrote:

Write the program in D3. If you need to add it to another program, open the file that d3 created and take what you need.

Show quoted text

On Dec 11, 2016, at 8:33 PM, marcelode@... [Crestron] <Crestron@...> wrote:

?

Can anyone send me a sample of a program for C2N-CBD to control a dimer module.
I have a few keypads and 01 dimmer module.
I always use DIN-AP3 which is very easy to donthe switches but now I am going to use simple window for a MC3.
I want to be able to use the button as toggle and hold it to raise and lower the brightness. It will be 6 buttons per keypad controlling individual loads.
Thanks

Re: C2N-CBD

Michael S. Moran

#218427

开云体育

Button Model should be "Toggle + Dim" where you input the desired delay time before the dimming process begin...generally about 0.5 seconds.

Attached the desired load(s) to each button on the KP.

?

Show quoted text

From: Crestron@... [mailto:Crestron@...]
Sent: Sunday, December 11, 2016 8:33 PM
To: Crestron@...
Subject: [Crestron] C2N-CBD

?

Can anyone send me a sample of a program for C2N-CBD to control a dimer module.
I have a few keypads and 01 dimmer module.
I always use DIN-AP3 which is very easy to donthe switches but now I am going to use simple window for a MC3.
I want to be able to use the button as toggle and hold it to raise and lower the brightness. It will be 6 buttons per keypad controlling individual loads.
Thanks

Re: Samsung QM-85D (QMD-Series) Quad View Control

#218426

Hello Chip;

Thank you for your answer but it shouldn't be about pip. Device has triple screen and quad screen menu. You can select screen type and select sources for these screens.

For example; On quad screen mode, you can select upperright-hdmi1, upperleft- hdmi2, lower right- hdmi3 and lowerleft - displayport1 but its not very userfriendly way even if you use its own remote.

We need to control it via rs232 or network and could select inputs for these quadwindows. Also we need to set sound source.

Do you have any advice?

Is there any commands for these goals.?

Thanks in advance.

Huawei TE40 HD module

#218425

Hi all,

can anyone please share working?Huawei TE40 HD module.

Regards,

Aneesh

Re: C2N-CBD

Steve Hedges

#218424

开云体育

Write the program in D3. If you need to add it to another program, open the file that d3 created and take what you need.

Show quoted text

On Dec 11, 2016, at 8:33 PM, marcelode@... [Crestron] <Crestron@...> wrote:

?

Can anyone send me a sample of a program for C2N-CBD to control a dimer module.
I have a few keypads and 01 dimmer module.
I always use DIN-AP3 which is very easy to donthe switches but now I am going to use simple window for a MC3.
I want to be able to use the button as toggle and hold it to raise and lower the brightness. It will be 6 buttons per keypad controlling individual loads.
Thanks

Re: iRobot Roomba 980 via crestron?

[email protected]

#218423

There are a couple products out there that have wifi cards for them and are crestron controllable. I have no experience but may after this christmas ;) . . . though it will be on the cheap model I think they are all basically the same.

?

C2N-CBD

#218422

Can anyone send me a sample of a program for C2N-CBD to control a dimer module. 
I have a few keypads and 01 dimmer module. 
I always use DIN-AP3 which is very easy to donthe switches but now I am going to use simple window for a MC3. 
I want to be able to use the button as toggle and hold it to raise and lower the brightness.  It will be 6 buttons per keypad controlling individual loads.
Thanks

Re: Sharp PN-U423 Control Using BPC 8

#218421

Great, I got it. ?Thanks. ?Next question, to control volume "VOLM ?30" puts the volume at 30 and "VOLM ?20" puts it at 20 and so on. ?There is no volume up/down command that I can see. ?So if only using a BPC-8 to control am I still stuck putting an IR sensor on the front for volume. ?Any ideas??

As always thanks everyone.

Re: Setting clock on a CP3

[email protected]

#218419

Commands that work in text console. ?It replies with the current time before taking my modifications. ?It is acting like it will only take the TIMEdate because it replies with the correct current time and ignores the remainder of my string. ?If I send TIMEdate 11:45:00 03/07/2016, it will reply with the current settings and ignore the 11:45:00 03/07/2016. ?It works fine if I use TCP Client instead. ?

Thanks,

TJ

Re: Updated IP control of Directv?

#218418

开云体育

To be clear on the module front, most calls I get are related to the DIRECTV webserver and "local" functions that the IP API doesn't work with on Genies, such as navigating some of the menus and power. No issue is because of Crestron or the module.

As with anyone who is using the module, and you run into a situation where something's not working as expected, feel free to give us a call. We are happy to look into the issue and get your feedback on the module.

Sent from my mobile. Please excuse brevity and any typos.

Caleb Radecky |?Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC |?Crestron Services Provider?| 701 Beta Dr. #22 Cleveland OH 44143
P.440.449.1100 X1109 | F.440.449.1106 |http://www.controlworks.com

Show quoted text

-----Original Message-----
From: ComeAlive@... [Crestron] [Crestron@...]
Received: Saturday, 10 Dec 2016, 18:38
To: Crestron@... [Crestron@...]
Subject: [Crestron] Re: Updated IP control of Directv?

?

+1 for the Control Works module. ?There are a couple of issues with controlling DTV via IP. ?Random loss of control when navigating menu or info bar. ?No power control for Genie clients. ?My understanding of these limitation have nothing to do with CWs but the way that the Crestron system handles the IP control and the limitation of DTV receivers.

Re: Setting clock on a CP3

#218417

开云体育

What command are you sending and what is console replying with?

Sent from my mobile. Please excuse brevity and any typos.

Caleb Radecky |?Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC |?Crestron Services Provider?| 701 Beta Dr. #22 Cleveland OH 44143
P.440.449.1100 X1109 | F.440.449.1106 |http://www.controlworks.com

Show quoted text

-----Original Message-----
From: techyjake@... [Crestron] [Crestron@...]
Received: Sunday, 11 Dec 2016, 13:12
To: Crestron@... [Crestron@...]
Subject: [Crestron] Setting clock on a CP3

?

I am testing out a module to set the date/time on the processor. ?I could not get it to work through the "CONSOLE" symbol. ?I was at the point to give up and decided to set up a TCPClient connection to itself and send the commands and it worked fine. ?Why would this be an issue and is there any reason I do not want to do it through the TCPClient connection? ?I put the IP address in it and used port 41795.

Thanks,

TJ

iRobot Roomba 980 via crestron?

#218420

has anyone seen a module for crestron to control the?iRobot Roomba 980 Robotic Vacuum Cleaner?


			Hi guys, i wrote a node.js library to control Roomba 980 and a short tutorial to get your own username/password: https://github.com/koalazak/dorita980 ...
				Preview by Yahoo

?

Setting clock on a CP3

[email protected]

#218416

I am testing out a module to set the date/time on the processor. ?I could not get it to work through the "CONSOLE" symbol. ?I was at the point to give up and decided to set up a TCPClient connection to itself and send the commands and it worked fine. ?Why would this be an issue and is there any reason I do not want to do it through the TCPClient connection? ?I put the IP address in it and used port 41795.

Thanks,

TJ

Re: DBX Zone Pro 1261 Stereo

#218415

I did this.

So in Zone Pro config i set input 5 & 6 to be stereo. And then I lose all control of the zone pro. Not just input routing but volume and mute control.