开云体育

DM routing over EISC, if you do it the obvious way, results in clearing all routes when you restart one of the programs. I wound up using XSIG symbols on both sides, with the serial signals from those

I feel the same way.

Anyone else going crazy with the new phone procedure where they have some middleman ask you what's wrong and write it down and then pass you off to someone else - who of course asks you the same

Thank you. This did the trick, I used the makestring. I appreciate the assist.

"So the 64x64 will be getting switching commands from multiple masters.... So how do I send commands to the 64x64 from multiple programs? Just define in both of those programs?" Noooooo... :) Pick one

I seem to remember a BenQ where I needed to send the power on command 2-3 times for it to regularly turn on.

sliders/analog values are a pita when it comes to crosspoints. . . I always had prev zones values being passed and way to much logic to prevent. Analog Fb and digital raise/Lower/Mute make life alot

+1 When I programmed a very large house with multiple dm systems and multiple swamps I hosted all the video routing code in one program and all the audio routing code in another. One of the biggest

Play actually starts a disc playing if there is one in there, so it's not a great method to turning on the player if all you want is to get to the home menu...

Is there some sort of power saver setting you haven't disabled? Crestron@...> wrote:

I would have a slot that just talks to the 64x64 and associated ins/outs, and then export the needed portions to the other slots / processors over EISC Crestron@...> wrote:

Nice. Noob for the win again! I try to pay attention to all the hex conversion threads, like I've posted before, one of my weakest areas of coding. Now I have to research %c.

So here is what I have... A DM-MD64x64 blade system which serves a room and also house the "SHARED VTC" video inputs and outputs... So the 64x64 will be getting switching commands from multiple

on off now Delimiter is \x0D ?? ________________________________ Sent: Thursday, September 22, 2016 7:01 AM To: Crestron@... Subject: [Crestron] SMART SB880I6 Does anyone have anything

"The embedded values for CHMajor & CHMinor are being sent as ASCII but I really want the value of the string to be hex not ascii so 12 should be \x12." Make sure CHMajor is being assigned as hex, not

Good morning all, I'm working with a BenQ SP830. The power on command doesn't work but all others do. Baud and serial strings have been checked and tech support contacted to no avail. Any thoughts?

"We experiencing some issue with v3.0 moduel from market. sometime the volume get stucked to max or min and there's no way to get back to work until we change the value in the symetrix software."

Where Day 2 is not second day, but more like 2018. [Crestron] <Crestron@...> wrote:

Do you have the Mobotix acting as the SIP server and all the panels are setup correctly?

Does anyone have anything on how to turn this device on and off? SMART SB880I6 Thank You.