开云体育

I've looked into this myself and the only way I can see to accomplish what I want is to write my own app and have it run in the background of the target Android device; I haven't looked into iOS yet

We have been trying to engineer such a thing as well. The problem with Pinpoint is you have to have the Crestron app running and open at all times for it to work. Not good enough. We were hoping to

I know as far as a PTL-4 vs a TPS-4L, the prodigy version worked with my Pro2 as far as the 4.3.15 firmware and it accepted a 4L vtp file, but as soon as I went to 4.8.8 it no longer talked to the

No problems here. In fact my last big project has a single file with 10 pages (There are 10 rooms types and one file runs the entire project/70 rooms) Each page has about 15-25 subs. When you first

I think you probably could have changed it over in half of the time that it took me to read your rant. ________________________________ CONFIDENTIALITY NOTICE: This e-mail transmission, and any

I also think multiple pages are easier, and have done it for many, many years. The only issue I've encountered doing it this way, is with Crestron Mobile (non-Core3) apps - the page-flips on those are

I do some of each... most of the panel is a single page with side/top menu bars, but some of the advanced pages that need more real estate (like a screen full of volume controls) will just flip to a

I use pages because it is easier to be honest. If I have a projector control page and need to pop up a warning about the projector being in cool down time I don't have to check to see if the user has

Thanks for your reply! I believe you are on to something. Debugger shows that commands from C20 is clearly sending to RX on CP3. But as you suggest, the module doesn't seem to recognize the codes.

I've never understood why anyone used more than one page. Subpages negate the need for more than a single page.

+1 Le 06/10/2014 23:18, Kol Johnson kol.mstc@... [Crestron] a crit :

Just don't use smart objects. The media player us a resource hog from what I've heard. Crestron@...> wrote:

So, my experience on a current project is that my use of multiple pages just didn't work. I don't have many pages, about 6 total. A main source page, a "smart media object" page for all of the media

How do you swipe between subpages in Crestron Mobile?

You could also use an Ocelot from ADI

Use the CM11a X10 (RS232) interface with the CM11a Crestron module. You won't get feedback, but I will do the on/off and dimming quite well.

http://av.yamahaconnect.com/index.php/product-info/item/304-rx-v675-av-rece iver <Crestron@...> wrote:

I should have been more clear. The HAI system is going and I need to have Crestron control the Lights via some sort of X10 interface... ---In Crestron@..., <chris@...> wrote :Hi All,

Hi All, YIKES!! I have a client with a REALLY old HAI system that controls the whole house of lights with it - mostly for scheduling. Has anyone found an interface to Crestron that is reasonably easy

I see it from both sides. As a end user 3K is a lot of cash. From a programmer's view you have no idea what kind of headache your going to get into with used equipment and what may get "added" during