Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
|
Re: Pro3 lan port
¿ªÔÆÌåÓýIn Toolbox enter the procesor¡¯s IP address and then in the controlsubnet hostname field enter the hostname configured on the device you¡¯re trying to reach. ? Isolation mode must be off for this ¡°auto NAT¡± to work, ? -- Lincoln King-Cliby, CTS Commercial Market Director Sr. Systems Architect | Crestron Certified Master Programmer (Silver) ControlWorks Consulting, LLC Crestron Services Provider http://www.controlworks.com From:
Crestron@... [mailto:Crestron@...] On Behalf Of coolaiddrinker@... ?
?Hi Guys,? ? I have a pro3 with Lan port configured with VPN access where all my biamp and amx switchers are residing. I can hit all the stuff on lan port by vpn access but can't seem to hit any touch panels on the control subnet. I have the the isolation mode turned off as well.? ? Do i need to configure something in port routings to see the touch panels? ?
|
|
Re: Yale Lock Questions
¿ªÔÆÌåÓýI suspect you¡¯re looking at the wrong version¡ there are two ¡°non-Crestron¡± versions (Zigbee and Z-Wave) out there¡ I toyed with the idea of picking up the Zigbee version of the lock, suspecting it may be cheaper on the secondary market than what I could get it for direct from Crestron and taking the gamble that it may or may not actually be compatible. ? (I have some suspicions, but officially, neither company says what changes [if any] are made for Crestron compatibility, and Crestron explicitly says only the locks purchased from them will work/be supported) ? Anyway, doing the pricing exercise, Crestron MSRP was close to street prices via other sources, and of course Dealer was considerably lower (but less than the typical MSRP-Dealer spread) ? I¡¯ve had one of the locks installed since November-ish and it works really well [aside from the gateway falling offline issue I posted about recently] and despite 2-4 cycles per day still reports 99% battery life on the original batteries. ? Lincoln ? -- Lincoln King-Cliby, CTS Commercial Market Director Sr. Systems Architect | Crestron Certified Master Programmer (Silver) ControlWorks Consulting, LLC Crestron Services Provider http://www.controlworks.com From:
Crestron@... [mailto:Crestron@...] On Behalf Of johnmaxx@... ?
Bringing up this topic again... If I want to use one of these Yale locks, do I NEED to get it from Crestron, or can I get one from another vendor? Theyre double the price from Crestron. If so is there a correct RF type to get? How would I acquire it to the RFGW-EX? And is there a different module for Crestron supplied vs non-Crestron supplied units??
|
|
Re: Yale Lock Questions
Bringing up this topic again... If I want to use one of these Yale locks, do I NEED to get it from Crestron, or can I get one from another vendor? Theyre double the price from Crestron. If so is there a correct RF type to get? How would I acquire it to the RFGW-EX? And is there a different module for Crestron supplied vs non-Crestron supplied units?? |
|
Pro3 lan port
¿ªÔÆÌåÓý?Hi Guys,? I have a pro3 with Lan port configured with VPN access where all my biamp and amx switchers are residing. I can hit all the stuff on lan port by vpn access but can't seem to hit any touch panels on the control subnet. I have the the isolation mode turned off as well.? Do i need to configure something in port routings to see the touch panels? |
|
Re: Motorola QIP 7232 2 IP Control
There is no released IP control. Why do you need to control it IP? IR control works perfect, and all QIP boxes use the same codes. If you don't want to put an emitter on the front, they support a rear plugin external IR receiver, and you can stick your emitter to that. |
|
Re: Anyone using Adelyte weather module? Stopped working yesterday
We have it in a number of installs (including my personal system) and it has been working fine since we made the fix posted above back in june. No problems. What issues were you having? I also noticed Adelyte has updated the module as well with the same fix from June. What did you change Avprogram? |
|
Re: DM help
¿ªÔÆÌåÓýYeah¡definitely check the cable/terminations ¨C what kind are you using? (e.g. actual DM cable; shielded/unshielded Cat7a, 6, 5E). ? Also, are there any large but intermittent EMI sources in the area (poorly shielded microwaves, welders, HAM radio operators, etc.) that you might be able to correlate with the issue? ? Lincoln ? -- Lincoln King-Cliby, CTS Commercial Market Director Sr. Systems Architect | Crestron Certified Master Programmer (Silver) ControlWorks Consulting, LLC Crestron Services Provider http://www.controlworks.com From:
Crestron@... [mailto:Crestron@...] On Behalf Of Mark Spicer ?
Sorry,? 100-c ? On Wednesday, February 26, 2014 5:30 PM, Lincoln King-Cliby wrote: ? 100, 100-C, 100-S? Which flavor of DM? ? -- Lincoln King-Cliby, CTS Commercial Market Director Sr. Systems Architect | Crestron Certified Master Programmer (Silver) ControlWorks Consulting, LLC Crestron Services Provider http://www.controlworks.com From:
Crestron@... [mailto:Crestron@...] On Behalf Of spicem100@... ?
? we are using a DM-RMC-100, not sure about the cable being certified,?I will have to check, but we did replace?it to rule that out?and we are still experiencing the inconsistent drop out.? We also changed?the tv input as well. ? ?
|
|
Re: PC/Laptop recommended reequirements
Both. ?Right now i'm running a new MBPr for everything, but my next laptop will likely be more along the lines of a MacBook Air or some other ultra book paired up with a custom PC setup to triple boot Window/Linux/OSX. ?Onsite is all about load/test/debug. ?The office is where all the magic happens.
On Wed, Feb 26, 2014 at 5:32 PM, <cyberbri24@...> wrote:
|
|
Re: DM help
Sorry,? 100-c On Wednesday, February 26, 2014 5:30 PM, Lincoln King-Cliby wrote:
?
100, 100-C, 100-S? Which flavor of DM?
?
--
Lincoln King-Cliby, CTS
Commercial Market Director
Sr. Systems Architect | Crestron Certified
Master Programmer (Silver)
ControlWorks Consulting, LLC
Crestron Services Provider
http://www.controlworks.com
From:
Crestron@... [mailto:Crestron@...] On Behalf Of spicem100@... Sent: Wednesday, February 26, 2014 4:23 PM To: Crestron@... Subject: RE: [Crestron] DM help ?
thanks Lincoln , ?
we are
using a DM-RMC-100, not sure about the cable being certified,?I will have
to check, but we did replace?it to rule that out?and we are still
experiencing the inconsistent drop out.? We also changed?the tv input
as well. |
|
Odd Error on CP3 and not even sure where to start
Here is the error:
Error: splusmanagerapp.exe # 18:03:21? 2-26-2014? #? SplusManager: Unable to send Module data back to the Logic Engine. Error Timeout for e_SIGNAL_TYPE_DIGITAL have an analog on as well.? Anyone have any ideas where to start? Thanks, TJ |
|
Re: DM help
¿ªÔÆÌåÓýHave you isolated it to just that input card or output card? ?You said you swapped out the RMC as well as the cable box but have you tried going into a different input on the DM? ? Pat On Feb 26, 2014, at 12:10 PM, <spicem100@...> wrote:
|
|
IR mono <> stereo cables?
Hi guys,
I have a project with an MC3 and a third party HDMI matrix that has IR passthrough with mono jacks. Don't really want to hook up the Crestron transmitter with the matrix' receiver, does anyone know if there's a cable that's built for this (mono jack <> stereo jack)? Thanks |
|
Re: OT:Atlona AT-PRO3HD44M
MikeS
If you are a dealer you can contact them at 210.348.6565 x1. Also Dobbs Stanford tommy@...
User Manual. It is so easy to control (simple ASCII commands similar to Extron) and can detect active detect inputs. www.tekvox.com/downloads/UM-TEKMHD44TP.pdf We have been using a lot of them for Dual Projection Classrooms. MSRP is only about $2K. Summit and Troxell has their products. Mike From: Crestron@... [mailto:Crestron@...] On Behalf Of bdgarcia@... Sent: Wednesday, February 26, 2014 4:35 PM To: Crestron@... Subject: [Crestron] RE: OT:Atlona AT-PRO3HD44M Mike S, Thank you for the information on Tekvox!! Where do you buy Tekvox from? I have not been able to track down pricing? Bryan [Non-text portions of this message have been removed] |