开云体育

Wow that's depressing. I played with the Media Player a little with 1 TP and idocv and Cen-track + Audionet. Could take a few seconds to connect and that was a small job with 1 TP. Is there anyone

Thanks for the support to help me with getting the passwords.This forum members were helpful in mailing me the passwords

I had to select "Project > Import Remote System Definition". I think that they disabled the the right click and import function direct at EISC symbol. Rafael Em 18/08/2013 10:18, Mark escreveu:

i have an AV3 on a large install the Core3 smart media object performance on the tuners is extremely slow & unreliable (using XPanel of TSW-750) i have tracked it down to the AV3 being too busy to

i found that sometime in the middle of working on an smw the import button would be greyed out i would have to shut down & restart SIMPL i haven't seen it with the latest version of SIMPL yet (new

If you can find some existing stock, we have used the Toshiba DVR-6##. HDMI out for DVD & VHS. We use the composite out for CC decoding. Our campus only has to support VHS for 1 more year!

It's new, therefore it's better, obviously. Why would they make something new if it was going to be worse?

Very strange your having control issue for symetrix device. i have done some legacy, jupiter series with the actual module with good success. have you assign correctly controller number ? Does the

an oscillator pulses "store" high every 60 seconds, and I have "1" on select---pretty sure the values are there (looks like it in debugger), and the dimmers are on. I will try the "1"s on store and

If the issue is feedback, I did not rewrite the module but used SBuffers. It was an older system using the old module. Volume commands worked but the feedback was screwy. If this fits your issue than

You need to include the x for the \ escape notation The strings you're trying to incorporate with those escape sequences MUST be 2 characters long, and you have them defined as 20 characters - you

Hey Bud, Yup, I ended up with the same answer. I am currently using Chip's IP control and, for the most part, am having no major problems. Thanks for the feedback though. Take Care, DAVE

So how are you storing the values? Like all the others mentioned a 1 on both store and recall is an automated way to store and recall values on reboot. If you're storing values, the select also has to

I'm not one to ask for modules, but does anyone out there have a module to do volume and mute on the new symetrix radius series? The claim was the old crestron modules would work but no

sipremext has the same syntax as sipaddext. \x20 is hex for space. you need to have a space between values. Where I wrote \x20 you need to have a space. Thus, sipremext space phonenumber space

Has anyone successfully controlled the power on command for a VPL-HW50ES projector with CEC? I've got the power off working and all HDMI settings in the menu turned to on for CEC control, but none of

Thanx for all the advice about recalling "1"s and having ram in first folder etc. But my problem never was recalling the values after start up-and all ram is in first folder-the problem I am having is

There is any number of ways to attack it. You say you are fairly new to Crestron programming, so hopefully my explanation isn't too confusing. You'll need to understand signal routing using buffers or

Nice explanation.

It is a terrible example of what needs to be done. There are 2 ways to deal with RAVA. One is to follow the Crestron line and perform data entry into every panel. This has the advantage of being able