开云体育

are you guys setting the ip tables right? When you have a 2 series slave (whether the master is 2 or 3 series), the IPT in the master must have the IP Address of the slave. If the slave is 2 series,

Nope, it was not done. Perhaps OP had an old xpanel that they recompiled and it dragged in all the xpanel 64 bit stuff too, that makes things much bigger and causes fitting problems.

I'm running a custom theme I built from scratch. Problem could be that the theme wasn't compiled after the app was released. Try importing the theme into studio and (latest version) compile and

Glad it worked!

Awesome! That saved me a ton to head-aches. I'd never even noticed that option before.... <btrujillo4343@...> wrote:

I have one you can have but you will need a new case/latch. It works great but the battery won't latch

Did you try "Recompute Signal Types" in the Project menu?

I'm editing a module, and somehow SIMPL has decided that the [~UNUSED~] signals on the DEFARGS should be an analog signal (highlighted red). Saving the module gives the "Problem Saving Program

We had a project where we ran OM2 fiber and used 8G DM hardware and it worked out just fine, I think it was our first DM system (back when we were told by Crestron that OM2 was fine, and they later

I have to say I feel your pain. Having been tarnished with many Crestron-product-that-didn't-perform-as-advertised brushes (i.e. TPMC10, Adagio, early DM, MC3 (Video GUI), TPMC9, TSW750, etc.)when

I have a few things that I'd like to get rid of: - AMS-AIP with dual-AM/FM tuner card. Somewhat ugly shipping box (from AVAD). Clean unit. Has been sitting in the bottom of my desk rack for way

Hi folks I have a client with a busted STX-1700. It's often cheaper to see if someone has a used one rather than getting the unit repaired. Does anyone have one and how much? Contact me off-list

Have you tried loading using toolbox instead of upload from sb.

I had a similar issue a week or two ago. CP3 was the master and MC2E was to be the slave, both running the latest firmware (1.007.0019 for the CP3 and 4.003.0015 for the MC2E). I couldn't seem to get

The 32 vs 64 MB is DRAM (runtime memory), not Flash (file storage)...and I don't know that that change ever made it down to the AES -- I do know the AV2/PRO2/CP2E families saw this

After quite a bit of messing around with the new app, it seems there's a pretty big issue. Has anyone tried loading a non-Crestron theme? I have tried one fron NTDesigns, and the system just hangs

Had occasion to check in with NJ on this yesterday. Turns out that the command is case sensitive. program01.programsend is NOT the same as Program01.programsend. here's a script that is tested and

i have been helping a dealer with an AES system we determined that the AES needed repair & they just got it back the SB program won't load the MAC XPanel - insufficient memory (it did load before

I have just been to look at a job where the existing AV contractor has gone bust, and they are looking for someone else to complete the job. Currently there are 6 TV positions that are to be fed from

I'm far from sure the resolution will be the same, but I've seen almost identical symptoms with a master-slave relationship between two 2-Series processors using CUZ 4.001.1012. Rolling the