开云体育

Does anyone have a series 3 processor configuration running multiple programs that you'd be willing to share with me? Need to shorten the learning curve. I have an immediate application that I think

I've been using ex-link with Samsung since the 'A' series and only had issue with one B-series model with an RF remote that wouldn't respond to the ON command (everything else worked) and on small,

I have a simple scrolling list test program that has one list that is programatically populated and It seems to work as well as the C3-xPanel, which is the fastest C3 device. In a related note this

Just one bad issue with the new app: the non-compatibility with ipad 1 version. everything else is great stuff -keep in mind we still are in beta kind of version- great to have core 3 power on mac

You definitely need to set up DNS in your processor for the module to work. In the SIMPL+ help: SOCKET_STATUS_NO_CONNECT 0 Not Connected SOCKET_STATUS_WAITING 1 Waiting for Connection

If you look at the full headers or "source" of a 2-series email, you'll see a Content-type: header with a specific char set. Compare 3-series. With no char set designated, a 3-series email is at the

I am looking for documentayion too, but i dont have access to crestronlabs. R From: Crestron@... [mailto:Crestron@...] On Behalf Of RobK Sent: Thursday, June 06, 2013 3:56 PM

The graphics on Crestron's page for the new app appear (I haven't measured) to be the aspect of an iPhone 5. Plus the demo pages in the app fit my iPhone 5 whereas the demo on the old app does not.

It is not for panel. It is for -e-mail message. Here is my simpl+ code that is working well in 2-series but in 3-series degree sign is not show. message$ = date(1)+" "+time()+" - Temperature is "+

What panel are you using? It's likely not a control system issue, but a panel issue. If it's a TSW... this was working early on, broken in firmware and reported quite a while ago, and AFAIK still not

When i wanted to get degree sign in simpl+ module i just get it with \xB0. The same module in 3-series and degree sign is not show. Is there any changes in ascii table? Regards

Perhaps technically, certainly not logistically. The entire reason we (ControlWorks) have not developed a module for Sonos is because both Sonos has not published a supported API and because Sonos has

Brett, We are using the new snapav WPS-750 ip cameras. Ex. RTSP://IP ADDRESS/v2 The V2 designates the lower res video stream. I spoke to them Friday and they gave a couple of other ideas which weren't

I forgot to ask, can we use rs232 and ir at the same time? Does the ir probe can be install at the any end?

Someone know if we could use the ir port of to be use has a serial one way? -- Envoyé avec Ipad Gmail Mobile // Sent with Ipad Gmail Mobile [Non-text portions of this message have been removed]

Hi Chip Where can I find the meaning of the values? I'll look at the DNS settings.. the address etc is all built into the module.. I think. Cheers

Hi, I had trouble getting this SIMPL file to compile. It will compile, but then remove all the Prowl Client module's input, output and parameter signals. I eventually discovered that I had to change

Jason, I have never used one but reading the spec would say it does. What brand of camera are you using? Do you have the correct RTSP URL with the user:pass set etc? What is the IP cameras settings

Jason, I've never used one but looking at the specs would say it does. What brand of IP cameras are you using? Are you supplying the correct credentials for the stream (user & pass)?

I'd really enjoy having something like this at my own house - I'll consider it...as soon as it's available from *any* other manufacturer besides Samsung. :( - Chip