开云体育

I'm using Lutron's r01 modules running on a MC3 with no issues, I haven't tried the r02 modules yet. perhaps rollback to the r01 modules unless you need something in the r02 modules. as an aside, the

Great - thanks, I'll check that out shortly.

Used an MMS-5 and it worked rather well (airplay is only on one of the outputs). I think it gets some meta data but not 100% sure.

The leafaudio product is great easy to setup and control

Hi guys Trying to hook a 9L to a asterisks sip server and Helios door station I've set the sip parameters as follows but not sure if these are the only ones to set And how to register with the server

Is it a new or old model, i don't think there were discretes for power, the newer models have RS232 control. If that is an option i can post a module Iain

You think :) It was very easy to wrote. {Paf} Le 8 mai 2013 20:25, "Chip" <cfm@...> a 閏rit :

First one of these I have had to deal with. Anyone have the discrete power and input commands as an IR file - I have the document with the NEC protocol codes and really do not fancy wrangling with

Hello I would like to have a clear definition of the hows and why's of Main() { While (1) { Gather (); Parse }} From my searching on this group I have found many tidbits of information that make this

I've actually had a look at this list and waiting for pricing on Wyrestorm and Atlona. Have anybody used the Leaf LTHDMI88E with the LTB1E receivers?

Substring and some STOAs, plus logic to accommodate 1-4 character numbers, sure - at the time I was looking for a quick & dirty solution and I wasn't concerned about polling every half hour or hour

Am I missing something or would a substring (possibly two) not suffice? (Or is it cool to do everything in Simpl+ again?) JRW

Hello! I am the owner of an RV which uses Crestron components for controlling many functions in the bus. Lights, shades, audio/video. The programming was done by a German company back in around 2006.

Binary does not make a 16x16 to my knowledge. Can you link?

Must be setup first using leviton usb progtamming dongle. That is how you set the id and which zwave device it's looking for to communicate with Trey please excuse typos, courtesy of my Samsung Note

Is anything else required for setting up the z-wave door lock with Leviton VRC0P? Do you need the Leviton USB or Remote to program it or can you program it from the DB9 on the VRC0P? Cheers

Wow that is a whole lot of extra work. Why? - Chip

How large did you declare the STRING_INPUT to be, and did you make sure to put a serial gather in front of the module with either 0D or 0A to make sure you get the whole message? It looks like the

Give it a look - it's not all that difficult. I think I used to have some modules in the file section for various Google chart things - don't know if they've gotten purged or not. - Chip

+1 for JAP (Just Add Power)