¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Crestron PRO2 broblem - blinking input-output & relay front panel LED

 

This usually happens when the Pro2 can't detect it's IO and/or COM boards. Given that they're sandwiched between the backplane and the case, I doubt they came loose, but you might as well check. Might need a replacement. Perhaps something got zapped and killed something.

--- In Crestron@..., "marcin.crestron" <marcin.wrona@...> wrote:

Hello,

I've got problem same as message topic. I'm on site installing equipment and one houer ago on front panel PRO2 start blinking I/O and Relay LED (all of them). Installers told me that not touch anything.
Already try do clear simpl file and disconect all cables but no success.
I can connect to PRO2 via RS232 or LAN.
Any idea?

Best Regards
Marcin
H.264 stream from Axis cameras to TSW750

Tom Kadlec
 

Has anyone been successful viewing H.264 streaming video directly from
an Axis camera to the TSW750? In theory, the 750 is supposed to support
H.264, but there is no documentation other than to the NVS200. I
believe it should be doable or Crestron couldn't make the claim
(right?). I am sure there is something simple that I am missing.

If anyone has any insight, please let me know what it is.



Thanks





Tom Kadlec

The HomeWorks Group / Advanced Security

7060 Koll Center Parkway

Pleasanton, CA 94566

925 600-9680 office
AV2 rebooting continously after program upload

 

Hi Guys,

When I load new program in the processor, it keeps rebooting. I can get it back by bypassing the program and reloading the old one.

Any clue what should I be looking for in the program that may cause this? I only Biamp and Tandberg Modules in the program. rest are just buffers so I can run non core 3 on tp and test core 3 on xpanel and provide feedback to smart objects..

TIA
Re: How many x-panels or crestron mobile pros

 

I have 8 iPads on a Pro2 and haven't had any problems. It's also a 4-person family and I don't think there's ever more than 4 being used simultaneously.

--- In Crestron@..., "kolathome" <kol.mstc@...> wrote:

can be reliably run on a pro2?

I have been asked to replace 9 vt3500s with iPads, and probably add a couple more x-panel or iphones as well. A pro2 and rack2 are available, but I am thinking that is not enough horsepower and I should recommend a 3 series processor to replace the pro2. I expect there would only ever be 3 or 4 in use simultaneously, and that would require the whole family be on them at the same time.

Thanks

Kol
Re: Wifi Recommendation

kabza
 

It seems to me that "Ubiquiti Unifi" no roaming.

regards

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf
Of Bart Podkowka
Sent: Monday, May 06, 2013 2:42 PM
To: <Crestron@...>
Subject: Re: [Crestron] Wifi Recommendation

Look at ubiquiti unifi. Great stuff!

Saludos,
Regards,
Mit freundlichen Gr¨¹?en,

Bart J. Podkowka
CISoftware Mallorca

Tel. +34 616273563
www.cisoftware.eu<>

On 3 May 2013, at 17:37, "Heath Volmer"
<hvolmer@...<mailto:hvolmer@...>> wrote:



Can someone recommend WAPs / controllers for a 4-WAP system, specifically
some that will hand off connections between WAPs without hiccuping iPads?
I'd like to work with something that I can set up myself (I can only learn
so much Cisco ios before I forget it). I've presented Access and the client
won't bite on their system.

Currently I have Netgear WNDAP 360 WAPs and while they seem to work very
well standing still, they don't hand off worth a crap.

Thanks, Heath




[Non-text portions of this message have been removed]



------------------------------------

*
****

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
*
****Yahoo! Groups Links
Re: Add Fonts to Core3 Project?

 

"I'm a doctor, not a bricklayer." ... I loves me some StarTrek :)


Tray



From: Chip
Sent: Tuesday, May 07, 2013 2:59 PM
To: Crestron@...
Subject: [Crestron] Re: Add Fonts to Core3 Project?



"Dammit Jim, I'm a coder - not a graphic designer!"

If only I could make my company *not* sell Core 3...errr..."SMART OBJECT" panels... I so would.

- Chip

--- In mailto:Crestron%40yahoogroups.com, "blcsnd" <joshjx@...> wrote:

But at the moment you can user the fonts provided by the themes or create a graphics for the object with the text and font you need instead.





[Non-text portions of this message have been removed]
Re: Tandberg / Cisco Edge 95MXP

 

COOL

THANKS

--- In Crestron@..., "Chip" <cfm@...> wrote:


Yes - you can use the 3000/6000 MXP module for that...

- Chip


--- In Crestron@..., "Mark" <dedicatedsystems@> wrote:

Has anyone controlled the Tandberg / Cisco Edge 95MXP via rs-232?

Have one in a project and not fully seeing this....
Re: Smartboard USB control over DM USB-HID

 

Good point. We NEVER use the USB speakers, they are terrible. Also, the pen tray switching in the 800 series isn't the best either, would rather use an Extron USB switch.

--- In Crestron@..., Rapha?l Thiffault <raphaelthiffault@...> wrote:

The problem with usb is the amount of hub between the computer and the
device.

I see some extender acting like 3 hubs when connected.

And if you using the smart usb speaker your adding a new hub, the pentray
usb switcher is another hub.
Re: Add Fonts to Core3 Project?

Chip
 

"Dammit Jim, I'm a coder - not a graphic designer!"

If only I could make my company *not* sell Core 3...errr..."SMART OBJECT" panels... I so would.

- Chip

--- In Crestron@..., "blcsnd" <joshjx@...> wrote:

But at the moment you can user the fonts provided by the themes or create a graphics for the object with the text and font you need instead.
Re: Tandberg / Cisco Edge 95MXP

Chip
 

Yes - you can use the 3000/6000 MXP module for that...

- Chip

--- In Crestron@..., "Mark" <dedicatedsystems@...> wrote:

Has anyone controlled the Tandberg / Cisco Edge 95MXP via rs-232?

Have one in a project and not fully seeing this....
Re: Multiple TSTATEX best practice again...

Heath Volmer
 

Either the way you are doing it or to use crosspoints (which is far cleaner.)

You do not necessarily have to set up six schedules for six tstats, but it's the simplest. I've set up larger systems where we combine several TSTATs onto one scheduler, so that multiple zones follow a common schedule and remain independent when heating/cooling. A bit annoying to get everything landed properly.

Heath


On May 7, 2013, at 12:43 PM, "Jae-Jin" <jinsonic_park@...> wrote:

I didn't have to program TSTAT so far and now I encountered one.
I have six TSTAT I need to program and Client want to control it individually. What I did was create six scheduler (for each TSTAT)and use Digital/Analog/Serial Buffer to connect each signal and seems like it is not a great idea. What would be a best practice to control six TSTAT with multiple touch panel(iPad)?

JP



[Non-text portions of this message have been removed]
Multiple TSTATEX best practice again...

 

I didn't have to program TSTAT so far and now I encountered one.
I have six TSTAT I need to program and Client want to control it individually. What I did was create six scheduler (for each TSTAT)and use Digital/Analog/Serial Buffer to connect each signal and seems like it is not a great idea. What would be a best practice to control six TSTAT with multiple touch panel(iPad)?

JP
Re: Does anyone have a module, or the commands to control Philips Hue with Crestron?

 

Good article with links here.

*

API here.





On Tue, May 7, 2013 at 2:25 PM, Edward D <eddopson@...> wrote:

**


I'm looking for either the syntax and commands or a module to control a
Philips Hue Lighting system with a Crestron processor via TCIP.



[Non-text portions of this message have been removed]
Does anyone have a module, or the commands to control Philips Hue with Crestron?

Edward D
 

I'm looking for either the syntax and commands or a module to control a Philips Hue Lighting system with a Crestron processor via TCIP.
Re: Add Fonts to Core3 Project?

 

Available fonts are governed by the Core3 theme applied to the project and/or page.
You will have to edit the theme to change the available fonts.

Tray


From: Eric Williams
Sent: Tuesday, May 07, 2013 1:38 PM
To: Crestron@...
Subject: RE: [Crestron] Add Fonts to Core3 Project?


You can use html font tags.

Sent from my pocket robot!

-----Original Message-----
From: "blcsnd" <mailto:joshjx%40gmail.com>
Sent: ?5/?7/?2013 12:56 PM
To: "mailto:Crestron%40yahoogroups.com" <mailto:Crestron%40yahoogroups.com>
Subject: [Crestron] Add Fonts to Core3 Project?

Does anyone know how to add fonts to a Core3 project?
I'm starting a new project using the TSW1050 and the client CANNOT have Arial only.

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
Re: Add Fonts to Core3 Project?

 

From True Blue: (yet another reason to STOP using Core3 products):

Fonts are based on the Themes. And the pre-made themes have a limited font selection built into them. You cannot edit the text to change to a font that is not part of the theme. When the Theme Editor becomes available (it is in development but I don't have a release date for it at this time) you will be able to add fonts to the themes to add more variety. But at the moment you can user the fonts provided by the themes or create a graphics for the object with the text and font you need instead.

--- In Crestron@..., "blcsnd" <joshjx@...> wrote:

Does anyone know how to add fonts to a Core3 project?
I'm starting a new project using the TSW1050 and the client CANNOT have Arial only.
Re: STX-1700CXP graphics

Aaron
 

Also, stick with native Windows fonts like Arial, Tahoma, Verdana, Trebuchet, and Georgia. With one of those fonts and the 16-level aa on, you can go as low as 7pt font size on those old dogs and it's still very legible.

--- In Crestron@..., "Aaron" <aaron@...> wrote:

There is a setting in console to turn on 16-level anti-aliasing rather than 4-level which is the default. This will make a world of difference with the fonts. I'm assuming you're using Synapse, if not, this setting won't change a thing.

--- In Crestron@..., Lincoln King-Cliby <lincoln@> wrote:

It's also worth trying Tahoma -- a font that seems to have been designed in part to cope with the limitations of early LCDs

--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
V: 440.449.1100 x1107 | F: 440.449.1106 | I:
Crestron Services Provider

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Seth Olle
Sent: Tuesday, May 07, 2013 9:39 AM
To: Crestron@...
Subject: Re: [Crestron] STX-1700CXP graphics

It is an STX-1700, it will look crappy no matter what font you use.
You can't compare it to clarity of modern panels or IPADs, will never come close.
Have to do quite a few upgrades with them UGH recently.
Arial Bold seems to be about the best you can do.

From: matt_rasmussen_2000 <mjrtoo@<mailto:mjrtoo@>>
Reply-To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>>
Date: Tuesday, May 7, 2013 9:32 AM
To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>>
Subject: [Crestron] STX-1700CXP graphics



I'm lucky enough to have to work on one of these old panels and having trouble getting any of the fonts to look even halfway good. Can anyone pass along some tips for working with these devices in the latest VTPRO software?

Setting x2 in the view helps, but it's still hard to layout that way. I've been using just Arial text with the font even set below the choices and still looks crappy.





------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
Re: STX-1700CXP graphics

Aaron
 

There is a setting in console to turn on 16-level anti-aliasing rather than 4-level which is the default. This will make a world of difference with the fonts. I'm assuming you're using Synapse, if not, this setting won't change a thing.

--- In Crestron@..., Lincoln King-Cliby <lincoln@...> wrote:

It's also worth trying Tahoma -- a font that seems to have been designed in part to cope with the limitations of early LCDs

--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
V: 440.449.1100 x1107 | F: 440.449.1106 | I:
Crestron Services Provider

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Seth Olle
Sent: Tuesday, May 07, 2013 9:39 AM
To: Crestron@...
Subject: Re: [Crestron] STX-1700CXP graphics

It is an STX-1700, it will look crappy no matter what font you use.
You can't compare it to clarity of modern panels or IPADs, will never come close.
Have to do quite a few upgrades with them UGH recently.
Arial Bold seems to be about the best you can do.

From: matt_rasmussen_2000 <mjrtoo@...<mailto:mjrtoo@...>>
Reply-To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>>
Date: Tuesday, May 7, 2013 9:32 AM
To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>>
Subject: [Crestron] STX-1700CXP graphics



I'm lucky enough to have to work on one of these old panels and having trouble getting any of the fonts to look even halfway good. Can anyone pass along some tips for working with these devices in the latest VTPRO software?

Setting x2 in the view helps, but it's still hard to layout that way. I've been using just Arial text with the font even set below the choices and still looks crappy.





------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
Re: How many x-panels or crestron mobile pros

Seth Olle
 

When you have crestron design a system for you. 5 is the max per processor.
I know you can do a bunch more. All depends what you are doing.
5 iPads with 18 different audio sources, full or cover art, and dynamic images would stress more then a simple iPad layout.

From: jgreenink16 <jgreenink16@...<mailto:jgreenink16@...>>
Reply-To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>>
Date: Tuesday, May 7, 2013 1:40 PM
To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>>
Subject: [Crestron] Re: How many x-panels or crestron mobile pros



I'm sure others have done more, but I've done up to 8 ipads before, but I can't tell you how many are used at once. I'm interested in what comes up here.

--- In Crestron@...<mailto:Crestron%40yahoogroups.com>, "kolathome" <kol.mstc@...> wrote:

can be reliably run on a pro2?

I have been asked to replace 9 vt3500s with iPads, and probably add a couple more x-panel or iphones as well. A pro2 and rack2 are available, but I am thinking that is not enough horsepower and I should recommend a 3 series processor to replace the pro2. I expect there would only ever be 3 or 4 in use simultaneously, and that would require the whole family be on them at the same time.

Thanks

Kol
Re: How many x-panels or crestron mobile pros

jgreenink16
 

I'm sure others have done more, but I've done up to 8 ipads before, but I can't tell you how many are used at once. I'm interested in what comes up here.

--- In Crestron@..., "kolathome" <kol.mstc@...> wrote:

can be reliably run on a pro2?

I have been asked to replace 9 vt3500s with iPads, and probably add a couple more x-panel or iphones as well. A pro2 and rack2 are available, but I am thinking that is not enough horsepower and I should recommend a 3 series processor to replace the pro2. I expect there would only ever be 3 or 4 in use simultaneously, and that would require the whole family be on them at the same time.

Thanks

Kol
77341 - 77360 of 256262