开云体育

Thank you!

Doh! I hate it when I do things like that.

Yes. Only a DM frame will inject power (assuming you have a POE injector)

Had to pull out from a DM-6x6 this box. We replaced a RM-100 so the customer can open a Garage Door. ever since we installed the switched lockup in a matter of minutes and or Hours. we called TB a

Yes you need to provide power to both unit. {Paf} 2013/5/8 cyberbri24 <cyberbri24@...> [Non-text portions of this message have been removed]

If I power up the SCALER behind the monitor and run the 8G cable direct to the 201-C, do I need to power up from both ends? Havn;t tried yet as was hoping to not have to use the PS on the TX side.

There's a demo program with simpl and vtpro files in the roomview install directory after the complete setup.

Or did moving the WAPs to another room actually help the Ruckus, since it was then able to use beamforming to focus the radio energy in one general direction, towards all the devices, without worrying

Have not gotten around to testing it, but there is a "roomview complete demo" program on crestron website. It appears to contain the modules needed to do scheduling, but iirc it did not include UI

Look into Kanexpro. ?They have a new modular switcher series. ?I use their other gadgets and they seem to work really good. ?No problems. ________________________________ To:

I see 2 likely issues: 1: Projector does not like 1600x1200. The projector is simply not capable of this. The manual will state the projectors capabilities. 2: Marginal wire. You have a wire that is

Does the projector state it can scan that high of a resolution? If not,you would need to use a scaling receiver like the scaler-c and set it to the projectors native resolution.

Hi, We have a project coming up where the client would like to control 170 Philips 2K12 (22HFL4007D/10 - 42HFL4007D/10) TVs via Ethernet. Has anyone done this or have access to a protocol? I believe

What are the alternative to Crestron for full HD distribution, when the budget is tight? 4x4, 8x8 or 16x16 tx

anyone worked with roomview sheduling? any gui ?

I must say that Airplay is great, but it doesn't always work. It will stop working for no apparent reason like weddellkw described. At first it seemed to me like the Airplay was the "once for all"

I take issue with only one thing in this video. The gentleman states that Ruckus' beamforming feature isn't "fair" so they put the WAP in a different room to remove the feature. While I understand

Actually, There was a database release that had an include.dat that caused 3.155 firmware to continually reboot Harvey

I have a 1080 source runninig via DMPS 300 C Dm out to DM-RMC-100 C to 1280 x 800 projector, no issues and projector model is detected. when I connect same manufacturer 1920 x 1200 I get no device

There is a thread a while back about this. You need to look at the cameras API and set the URL to request the stream from the camera at the size and frame rate you want. Axis has alot of documentation